Linux RAID Storage
[Prev Page][Next Page]
- Re: Linux RAID Enterprise-Level Capabilities and If It Supports Raid Level Migration and Online Capacity Expansion, (continued)
- more info on the hang with 2.6.15-rc5,
Sebastian Kuzminsky
- problem with 2.6.15-rc5, Sebastian Kuzminsky
- hangs with 2.6.15-rc5,
Sebastian Kuzminsky
- Raid sync observations,
Sebastian Kuzminsky
- RAID 5 - Botched Output information, Matt Darcy
- Re: [Fwd: Re: recorvery from Raid5 multiple disk failture], Hendrik Naumann
- mdadm state,
mario kammerer - the.PRO-jects.com
- RAID design decisions,
John Stoffel
- LILO Error 09,
Carles Pina i Estany
- recorvery from Raid5 multiple disk failture,
Hendrik Naumann
- SATA controller order,
Andre Majorel
- mdadm 2.2 compile problem,
Robert Heinzmann
- mdadm 2.2 new option,
Robert Heinzmann
- First RAID Setup,
Andargor The Wise
- Need for init:query, amritanshu johri
- moving failing system disk to 2xnew RAID1,
Max Waterman
- resize2fs failing--how to resize my fs?,
Michael Stumpf
- [PATCH md 000 of 20] Introduction,
NeilBrown
- [PATCH md 001 of 20] Fix a use-after-free bug in raid1, NeilBrown
- [PATCH md 003 of 20] Define and use safe_put_page for md., NeilBrown
- [PATCH md 002 of 20] Use correct size of raid5 stripe cache when measuring how full it is., NeilBrown
- [PATCH md 004 of 20] Helper function to match commands written to sysfs files., NeilBrown
- [PATCH md 005 of 20] Fix typo in comment., NeilBrown
- [PATCH md 006 of 20] Make a couple of names in md.c static, NeilBrown
- [PATCH md 007 of 20] Make sure bitmap updates are visible through filesystem., NeilBrown
- [PATCH md 008 of 20] Fix rdev->pending counts in raid1, NeilBrown
- [PATCH md 009 of 20] Allow chunk_size to be settable through sysfs, NeilBrown
- [PATCH md 010 of 20] Allow md array component size to be accessed and set via sysfs, NeilBrown
- [PATCH md 011 of 20] Expose md metadata format in sysfs., NeilBrown
- [PATCH md 012 of 20] Allow array level to be set textually via sysfs., NeilBrown
- [PATCH md 013 of 20] Count corrected read errors per drive., NeilBrown
- [PATCH md 014 of 20] Allow md/raid_disks to be settable., NeilBrown
- [PATCH md 015 of 20] Keep better track of dev/array size when assembling md arrays., NeilBrown
- [PATCH md 016 of 20] Expose device slot information via sysfs, NeilBrown
- [PATCH md 017 of 20] Export rdev->data_offset via sysfs, NeilBrown
- [PATCH md 018 of 20] Allow available size of component devices to be set via sysfs., NeilBrown
- [PATCH md 019 of 20] Support adding new devices to md arrays via sysfs, NeilBrown
- [PATCH md 020 of 20] Allow sync-speed to be controlled per-device, NeilBrown
- raidreconf on raid-5, SATA, inf. Write Errors, Jean-Luc Cooke
- stripe_cache_size ?,
Kyle Wong
- mdadm source rpm build error + command-line parsing error + resync reporting problem,
Mike Hardy
- performance question about cache/buffers (not exactly raid), JaniD++
- random lockups, raid problems SOLVED (plus a question),
Michael Stumpf
- RAID card, Sharif Islam
- Raid1 "synchronous" mirror question,
Robert Heinzmann
- raid5 in degraded mode; trying to revive,
Milo
RAID5 resync question,
JaniD++
2.6.15-rc5-mm1: raid related oops,
jurriaan
mdadm --size and --update=uuid etc options...,
Michael Tokarev
ANNOUNCE: mdadm 2.2 - A tool for managing Soft RAID under Linux,
Neil Brown
RAID 0 and 1 Benchmark, Carles Pina i Estany
Re: newbie - mdadm create raid1 mirrors on large drives, Neil Brown
RAID5 problem,
Alfons Andorfer
<Possible follow-ups>
Re: RAID5 problem, Andrew Burgess
Problems with 2.6.14.3, Clemens Schwaighofer
Does mdadm --create harm existing data?,
Andrew Burgess
what does this mean: ioctl lock interrupted,
Eyal Lebedinsky
is it possible to change the UUID of an array?,
Adam Nevins
Please help with reconstruction of RAID 5, Mats Johnson
Data errors on clean, degraded Raid5. Help Please.,
Erich Newell
Failed Recovery - Errors in Degraded Mode, Erich Newell
quick Q re raid reconstruction,
Eyal Lebedinsky
What is the status of the raid5 online resize patch ?,
Francois Barre
[PATCH md 000 of 14] Introduction,
NeilBrown
- [PATCH md 001 of 14] Support check-without-repair of raid10 arrays, NeilBrown
- [PATCH md 002 of 14] Allow raid1 to check consistency, NeilBrown
- [PATCH md 003 of 14] Make sure read error on last working drive of raid1 actually returns failure., NeilBrown
- [PATCH md 005 of 14] raid10 read-error handling - resync and read-only, NeilBrown
- [PATCH md 004 of 14] auto-correct correctable read errors in raid10, NeilBrown
- [PATCH md 006 of 14] Make /proc/mdstat pollable., NeilBrown
- [PATCH md 007 of 14] Clean up 'page' related names in md, NeilBrown
- [PATCH md 008 of 14] Convert md to use kzalloc throughout, NeilBrown
- [PATCH md 009 of 14] Tidy up raid5/6 hash table code., NeilBrown
- [PATCH md 010 of 14] Convert various kmap calls to kmap_atomic, NeilBrown
- [PATCH md 011 of 14] Convert recently exported symbol to GPL, NeilBrown
- [PATCH md 012 of 14] Break out of a loop that doesn't need to run to completion., NeilBrown
- [PATCH md 013 of 14] Remove personality numbering from md., NeilBrown
- [PATCH md 014 of 14] Fix possible problem in raid1/raid10 error overwriting., NeilBrown
need help with raid6 recovery,
Andrew Burgess
Journal-guided Resynchronization for Software RAID,
Timothy E. Denehy
Linux Raid boot - stuck in a raid start loop - Advice,
Matt Darcy
md workings, new raid, Burton Rosenberg
/proc/mdstat bug: 2.6.14.2,
Andrew Burgess
building a disk server,
Sebastian Kuzminsky
Re: building a disk server, Lajber Zoltan
<Possible follow-ups>
Re: building a disk server, Jeff Breidenbach
Promise sx4100 (PDC20621) with sata_sx4, Jan Reiter
[PATCH md 000 of 18] Introduction,
NeilBrown
- [PATCH md 004 of 18] Set default_bitmap_offset properly in set_array_info, NeilBrown
- [PATCH md 003 of 18] Fix problem with raid6 intent bitmap, NeilBrown
- [PATCH md 005 of 18] Fix --re-add for raid1 and raid6, NeilBrown
- [PATCH md 001 of 18] Improve read speed to raid10 arrays using 'far copies'., NeilBrown
- [PATCH md 002 of 18] Fix locking problem in r5/r6, NeilBrown
- [PATCH md 007 of 18] Improve raid10 "IO Barrier" concept., NeilBrown
- [PATCH md 006 of 18] Improve raid1 "IO Barrier" concept., NeilBrown
- [PATCH md 009 of 18] Allow dirty raid[456] arrays to be started at boot., NeilBrown
- [PATCH md 011 of 18] Write intent bitmap support for raid10, NeilBrown
- [PATCH md 012 of 18] Fix raid6 resync check/repair code., NeilBrown
- [PATCH md 013 of 18] Improve handing of read errors with raid6, NeilBrown
- [PATCH md 010 of 18] Move bitmap_create to after md array has been initialised., NeilBrown
- [PATCH md 008 of 18] Small cleanups for raid5, NeilBrown
- [PATCH md 014 of 18] Attempt to auto-correct read errors in raid1., NeilBrown
- [PATCH md 016 of 18] Better handling for read error in raid1 during resync, NeilBrown
- [PATCH md 015 of 18] Tidyup some issues with raid1 resync and prepare for catching read errors., NeilBrown
- [PATCH md 017 of 18] Handle errors when read-only, NeilBrown
- [PATCH md 018 of 18] Fix up some rdev rcu locking in raid5/6, NeilBrown
[PATCH] Fix for "Booting from raid1 -- md: invalid raid superblock mag",
Raphaël Rigo
DeviceDisappeared events on reboot, Trevor Cordes
mdadm HOWTO,
Mike Smith
Booting from raid1 -- md: invalid raid superblock magic on sdb1,
David M. Strang
Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1, David M. Strang
Re: Booting from raid1 -- md: invalid raid superblock magic on sdb1, Bill Davidsen
mdadm: What does "Failed devices : -1" mean ?, Ivor Joseph Dvorecky
Re: Poor Software RAID-0 performance with 2.6.14.2,
Bill Davidsen
mdadm upgrade easy or brain surgery?,
Jeff Breidenbach
comparing FreeBSD to linux,
Raz Ben-Jehuda(caro)
RE: comparing FreeBSD to linux, Guy
Recovering a 4-disk RAID5 array from 2 clean disks and 2 spares,
Remi Broemeling
no reconstruction in 2.6.14.2?,
Carlos Carvalho
mdadm 2.1: command line option parsing bug?,
Andreas Haumer
raid5 write performance,
Jure Pečar
raidtools-1.00.3-234 bug report,
d binderman
[PATCH md ] Fix is_mddev_idle calculation now that disk/sector accounting happens when request completes., NeilBrown
HELP 13 disk raid 5 not starting,
Jim Buttafuoco
High system load on 2.6.15-r1 & software raid,
Frido Ferdinand
Autostart RAID1 on boot,
Spencer Tuttle
Crooked raid,
Guillaume Filion
3-disk RAID1 - only two disks active,
vherva
raid5 recovery fails,
Raz Ben-Jehuda(caro)
help!,
Shane Bishop
[PATCH] minor bugfix in expected_spares logic, Ross Vandegrift
[PATCH] syslog support for monitor mode, Ross Vandegrift
[PATCH] add text message mode for terse reports, Ross Vandegrift
Raid-6 Rebuild question,
Brad Campbell
Unable to compile mdadm-2.1 in IA64 enviroment, Krzysztof Oledzki
/boot on RAID5 with GRUB,
Spencer Tuttle
[ANNOUNCE] multipath-tools-0.4.6, Christophe Varoqui
questions about ext3, raid-5, small files and wasted disk space,
kyle
doubts about intent-logging,
Carlos Carvalho
[PATCH] proactive raid5 disk replacement, 2.6.14, Pallai Roland
New raid5 took 5 days for initial build on spare drive,
Spencer Tuttle
intent-logging, not synchronizing written blocks?,
Carlos Carvalho
Still Need Help on mdadm and udev,
andyliebman
how to understand this bitmap_zero,
Ming Zhang
"md: could not lock unknown-block" error with two RAID1s, two disks,
Thomas F. O'Connell
Replacement disk is slightly smaller,
Andy Smith
udev and mdadm -- I'm lost,
AndyLiebman
RAID 5 array keeps dropping drive on boot,
Troels Bang Jensen
Weird fdisk -l output,
Derek Yeung
[fwd: ECC circuitry error / md weirdness?],
PinkFreud
still a boot issue,
Peter Lauda
Oopsing with md in 2.6.14-rc5-mm1,
Reuben Farrelly
kernel panic reading root disk (s/w raid0), Don Feliciano
raid-1 without marking partition as type "fd", Hari Bhaskaran
[PATCH md 000 of 10] Introduction,
NeilBrown
- [PATCH md 003 of 10] Make sure a user-request sync of raid5 ignores intent bitmap, NeilBrown
- [PATCH md 001 of 10] Make sure /block link in /sys/.../md/ goes to correct devices., NeilBrown
- [PATCH md 002 of 10] Make manual repair work for raid1., NeilBrown
- [PATCH md 004 of 10] Fix some locking and module refcounting issues with md's use of sysfs., NeilBrown
- [PATCH md 005 of 10] Split off some md attributes in sysfs to a separate group., NeilBrown
- [PATCH md 007 of 10] Ignore auto-readonly flag for arrays where it isn't meaningful., NeilBrown
- [PATCH md 006 of 10] Only try to print recovery/resync status for personalities that support recovery, NeilBrown
- [PATCH md 008 of 10] Complete conversion of md to use kthreads., NeilBrown
- [PATCH md 009 of 10] Improve 'scan_mode' and rename it to 'sync_action', NeilBrown
- [PATCH md 010 of 10] Document sysfs usage of md, and make a couple of small refinements., NeilBrown
DS4000 Storage Server (Engenio based) Management Protocol Analyzer, info
raid5 two disk failure,
Meik Nienaber
raid0 fail to detect drive failure,
Ming Zhang
s/w raid and bios renumbering HDs,
Hari Bhaskaran
Superblock updates to failed spare,
Sean Puttergill
Flappy hotswap disks?,
Molle Bestefich
[PATCH] Make sure mdthreads will always respond to kthread_stop, NeilBrown
split RAID1 during backups?,
Jeff Breidenbach
- Re: split RAID1 during backups?, Jurriaan Kalkman
- Re: split RAID1 during backups?, Brad Campbell
- Re: split RAID1 during backups?, Bill Davidsen
- Re: split RAID1 during backups?, Thomas Garner
- Re: split RAID1 during backups?, Christopher Smith
- <Possible follow-ups>
- Re: split RAID1 during backups?, Jeff Breidenbach
- Re: split RAID1 during backups?, Jeff Breidenbach
- Re: split RAID1 during backups?, Jeff Breidenbach
- Re: split RAID1 during backups?, Jeff Breidenbach
- split RAID1 during backups?, Jeff Breidenbach
- Re: split RAID1 during backups?, Jeff Breidenbach
how to add third drive to RAID1 made of two drives without destroying data,
Juraj Holtak
raid'ing problems,
Peter Lauda
Make SCSI disks work again?, Robin Bowes
[PATCH-STABLE] Fix data-corruption bug in md when delayed recovery is interrupted., Neil Brown
[PATCH md ] Three one-liners in md.c, NeilBrown
RAID-5 or RAID-6 with mdadm 1.9.0-4 and 2.6.11.9,
Ewan Grantham
Diff between 2.4 and 2.6 kernels for raid, Paul Aviles
Patch: kernel crash while trying to mount XFS on a failed-to-start raid5 array, Bo Yang
2.4 and --grow?,
Carl Jones
All disks in the array suddenly non-fresh??,
Boris Shingarov
RAID, Makovecz Ádám
GUI for mdadm,
James Neale
big fault :-),
Karsten Römke
mdadm-2.1-1.i386.rpm and linux-gate.so.1,
berk walker
softraid growing?, drtyc
unbalance?, Ming Zhang
Automatic drive partitioning,
Thomas Jarosch
raid5 resize,
Andre' Breiler
Anybody know about nforce4 SATA II hot swapping + linux raid?,
Andrew Walrond
bit-rot, crc errors, etc question,
Michael Stumpf
RAID 6 corruption : please help!,
Trevor Cordes
ATAn timeout errors,
Robin Bowes
Checking the sanity of SATA disks,
Andy Smith
non-fresh drive?,
Hank Barta
madadm man page ambiguities: '--size' units, superblock affordance,
Gordon Mohr (@ Bitzi)
Convert RAID5 to RAID5?,
Robin Bowes
Best way to achieve large, expandable, cheap storage?,
Robin Bowes
- Re: Best way to achieve large, expandable, cheap storage?, Robin Bowes
- Re: Best way to achieve large, expandable, cheap storage?, Gregory Seidman
- Re: Best way to achieve large, expandable, cheap storage?, Christopher Smith
- <Possible follow-ups>
- Re: Best way to achieve large, expandable, cheap storage?, Andrew Burgess
driver a320raid for kernel 2.4.21-3,
Lukasz Razmuk
Shrinking on-disk size of RAID1 array?,
Gordon Mohr (@ Bitzi)
Wierd issue with hard-drive, unable to write to/change it, Tyler
[Fwd: Multipath Tools.], Mike Tran
Multipath Tools., Brad Dameron
still compile error,
Norman Schmidt
which external disk enclosure?, Sebastian Kuzminsky
maximum size,
Farkas Levente
did I just destroy my data?,
Sebastian Kuzminsky
new megaraid driver problem at Opteron (fwd), Evgeny Rodichev
Re: suggestions for SATA controllers (PCI-X or PCI-E), e.g. Highpoint,, linux
Root RAID 1+0 micro-HOWTO, linux
mdadm 2.0 and 2.1 compile error,
Norman Schmidt
*** Announcement: dmraid 1.0.0.rc9 ***, Heinz Mauelshagen
mdadm core dump,
Ming Zhang
raid5 missing drive at boot question,
Orion Poplawski
raid5 or raid6 and the maximum size,
Farkas Levente
Setting NR_STRIPES high increases RAID5 performance, bart@xxxxxxxxxxxxx
Fw: OOPS in raid10.c:1448 in vanilla 2.6.13.2,
Andrew Morton
[Index of Archives]
[Linux RAID Wiki]
[Linux Block]
[ATA RAID]
[Kernel]
[Linux SCSI]
[Linux iSCSI]
[Linux SCSI Target Infrastructure]
[Linux Books]