RE: cpu consumption

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




} -----Original Message-----
} From: linux-raid-owner@xxxxxxxxxxxxxxx [mailto:linux-raid-
} owner@xxxxxxxxxxxxxxx] On Behalf Of Gilberto Diaz
} Sent: Monday, January 23, 2006 5:28 PM
} To: linux-raid@xxxxxxxxxxxxxxx
} Subject: cpu consumption
} 
} Hello Everybody
} 
}    I have checked the list archive but I could not find any message that
} help. So I'm asking for help here. I have a Sun storege with 12 sata
} hard disks connected to a normal PC using a QLogic ISP2300 host adapter
} card. I have configured 6 raid1, (2 hard disk each). I excecuted the
} following commands to create all of the them
} 
} mdadm --create --verbose /dev/md1 --level=raid1 --raid-devices=2
} /dev/sda /dev/sdb
} mdadm --create --verbose /dev/md2 --level=raid1 --raid-devices=2
} /dev/sdc /dev/sdd
} mdadm --create --verbose /dev/md3 --level=raid1 --raid-devices=2
} /dev/sde /dev/sdf
} mdadm --create --verbose /dev/md4 --level=raid1 --raid-devices=2
} /dev/sdg /dev/sdh
} mdadm --create --verbose /dev/md5 --level=raid1 --raid-devices=2
} /dev/sdi /dev/sdj
} mdadm --create --verbose /dev/md6 --level=raid1 --raid-devices=2
} /dev/sdk /dev/sdl
} 
} Here is my /etc/mdadm/mdadm.conf file
} 
} DEVICE /dev/sd[abcdefghijkl] /dev/md1 /dev/md2 /dev/md3 /dev/md4
} /dev/md5 /dev/md6
} ARRAY /dev/md1 devices=/dev/sda,/dev/sdb
} ARRAY /dev/md2 devices=/dev/sdc,/dev/sdd
} ARRAY /dev/md3 devices=/dev/sde,/dev/sdf
} ARRAY /dev/md4 devices=/dev/sdg,/dev/sdh
} ARRAY /dev/md5 devices=/dev/sdi,/dev/sdj
} ARRAY /dev/md6 devices=/dev/sdk,/dev/sdl
} 
}    The problem is that the following proccesses are using a lot of cpu
} time.
} 
}     md1_raid1
}     md1_resync
}     ......
}     md6_raid1
}     md6_resync
} 
}     Here is a sample of the uptime command
} 
} 17:54:16 up  5:48,  2 users,  load average: 5.02, 5.05, 5.26

What is the CPU load?  The above does not reflect CPU usage.
I beleve it reports on average outsanding IOs.  With 6 arrays syncing, I
would have expected 6 or 12.

Run "top", or "sar -u 10 10" to see CPU usage.

Guy
} 
}     Does anybody have an idea what is the problem? Thank a lot in advance
} 
} Best regards
} Gilberto Diaz
} -
} To unsubscribe from this list: send the line "unsubscribe linux-raid" in
} the body of a message to majordomo@xxxxxxxxxxxxxxx
} More majordomo info at  http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux