Linux RAID Storage Date Index

Thread Index

Re: Did I make a mistake?
- From: Roman Mamedov <rm@xxxxxxxxxx>
RE: Best way to create RAID-6 for swap partition - existing one failed
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Did I make a mistake?
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: HBA Adaptor advice
- From: Andy Smith <andy@xxxxxxxxxxxxxx>
Re: Mdadm re-add fails
- From: NeilBrown <neilb@xxxxxxx>
Re: HBA Adaptor advice
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: HBA Adaptor advice
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: HBA Adaptor advice
- From: Thomas Harold <thomas-lists@xxxxxxxxxx>
Re: check which disk is a problem
- From: Pol Hallen <raid2@xxxxxxxxxxxxxx>
Re: HBA Adaptor advice
- From: Michael Sallaway <michael@xxxxxxxxxxxx>
Re: HBA Adaptor advice
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: HBA Adaptor advice
- From: Roman Mamedov <rm@xxxxxxxxxx>
HBA Adaptor advice
- From: Ed W <lists@xxxxxxxxxxxxxx>
Re: check which disk is a problem
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: check which disk is a problem
- From: Kay Diederichs <kay.diederichs@xxxxxxxxxxxxxxx>
check which disk is a problem
- From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: likewhoa <likewhoa@xxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: likewhoa <likewhoa@xxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Best way to create RAID-6 for swap partition - existing one failed
- From: David Brown <david@xxxxxxxxxxxxxxx>
Mdadm re-add fails
- From: "Schmidt, Annemarie" <Annemarie.Schmidt@xxxxxxxxxxx>
Re: Unable to grow RAID 6 array
- From: Laurent CARON <lcaron@xxxxxxxxxxxxxxxxx>
Re: Unable to grow RAID 6 array
- From: NeilBrown <neilb@xxxxxxx>
Re: Unable to grow RAID 6 array
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Unable to grow RAID 6 array
- From: Laurent CARON <lcaron@xxxxxxxxxxxxxxxxx>
Re: Incompatibility of internal bitmap with ext4 barriers?
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: permanently removing a spare
- From: NeilBrown <neilb@xxxxxxx>
Re: permanently removing a spare
- From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
Re: Incompatibility of internal bitmap with ext4 barriers?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Incompatibility of internal bitmap with ext4 barriers?
- From: Jason Tinker <jsntinker@xxxxxxxxx>
Re: Incompatibility of internal bitmap with ext4 barriers?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: repartitioning disks
- From: CoolCold <coolthecold@xxxxxxxxx>
Incompatibility of internal bitmap with ext4 barriers?
- From: Jason Tinker <jsntinker@xxxxxxxxx>
Re: repartitioning disks
- From: NeilBrown <neilb@xxxxxxx>
repartitioning disks
- From: CoolCold <coolthecold@xxxxxxxxx>
Best way to create RAID-6 for swap partition - existing one failed
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: [PATCH] RAID-6 check standalone suspend array V2.0
- From: NeilBrown <neilb@xxxxxxx>
RE: /dev/md2 stopped after changing SAS controller
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: raid5 reshape failure - restart?
- From: Glen Dragon <glen.dragon@xxxxxxxxx>
Re: raid5 reshape failure - restart?
- From: NeilBrown <neilb@xxxxxxx>
[PATCH] RAID-6 check standalone suspend array V2.0
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
raid5 reshape failure - restart?
- From: Glen Dragon <glen.dragon@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Joe Landman <joe.landman@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
RE: Growing a RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
RE: Growing a RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Drew <drew.kay@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: CoolCold <coolthecold@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: CoolCold <coolthecold@xxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: Growing a RAID array
- From: NeilBrown <neilb@xxxxxxx>
RE: Growing a RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: /dev/md2 stopped after changing SAS controller
- From: NeilBrown <neilb@xxxxxxx>
/dev/md2 stopped after changing SAS controller
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Phil Turmel <philip@xxxxxxxxxx>
mdadm does not create partition devices whatsoever, "partitionable" functionality broken
- From: Christopher White <linux@xxxxxxxxxxxxxx>
RE: New device for RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
RE: Growing a RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: New device for RAID array
- From: NeilBrown <neilb@xxxxxxx>
RE: New device for RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: Growing a RAID array
- From: NeilBrown <neilb@xxxxxxx>
Re: New device for RAID array
- From: NeilBrown <neilb@xxxxxxx>
Growing a RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
New device for RAID array
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
permanently removing a spare
- From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
Re: reshape failure
- From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
Re: [PATCH] Update documentation for sync_min and sync_max entries
- From: NeilBrown <neilb@xxxxxxx>
Re: reshape failure
- From: NeilBrown <neilb@xxxxxxx>
Re: reshape failure
- From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
Re: reshape failure
- From: NeilBrown <neilb@xxxxxxx>
Re: reshape failure
- From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
Re: [PATCH] Update documentation for sync_min and sync_max entries
- From: CoolCold <coolthecold@xxxxxxxxx>
Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
[md PATCH 06/16] md/multipath: discard ->working_disks in favour of ->degraded
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 02/16] md: reject a re-add request that cannot be honoured.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 13/16] md/raid10: make more use of 'slot' in raid10d.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 01/16] md: Fix race when creating a new md device.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 07/16] md: make error_handler functions more uniform and correct.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 12/16] md/raid10: some tidying up in fix_read_error
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 11/16] md/raid1: improve handling of pages allocated for write-behind.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 03/16] md/bitmap: fix saving of events_cleared and other state.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 05/16] md/raid1: clean up read_balance.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 04/16] md: simplify raid10 read_balance
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 15/16] md/raid10: reformat some loops with less indenting.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 09/16] md/raid1: tidy up new functions: process_checks and fix_sync_read_error.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 10/16] md/raid1: try fix_sync_read_error before process_checks.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 14/16] md/raid10: remove unused variable.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 08/16] md/raid1: split out two sub-functions from sync_request_write
- From: NeilBrown <neilb@xxxxxxx>
Antw: Re: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
Re: Convert RAID 5 to RAID 6 while reducing array size
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
[md PATCH 16/16] md: allow resync_start to be set while an array is active.
- From: NeilBrown <neilb@xxxxxxx>
[md PATCH 00/16] md patches for 2.6.40
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: Dylan Distasio <interzone@xxxxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: Dylan Distasio <interzone@xxxxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: NeilBrown <neilb@xxxxxxx>
RE: RAID5 -> RAID6 conversion, please help
- From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: RAID5 -> RAID6 conversion, please help
- From: NeilBrown <neilb@xxxxxxx>
RAID5 -> RAID6 conversion, please help
- From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
Re: [PATCH][Trivial] md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
- From: Jiri Kosina <jkosina@xxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: NeilBrown <neilb@xxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
[PATCH] RAID-6 check standalone suspend array V2.0
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: Michael Reed <mdr@xxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Emmanuel Noobadmin <centos.admin@xxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: NeilBrown <neilb@xxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: [PATCH 0/5] imsm support for raid0->raid5 migration
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone suspend array
- From: NeilBrown <neilb@xxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
[PATCH] RAID-6 check standalone suspend array
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Luca Berra <bluca@xxxxxxxxxx>
Convert RAID 5 to RAID 6 while reducing array size
- From: Anshuman Aggarwal <anshuman@xxxxxxxxxxxxx>
Convert RAID 5 to RAID 6 while reducing array size
- From: Anshuman Aggarwal <anshuman@xxxxxxxxxxxxx>
2.6.32.28 - md resync + pvmove - crash
- From: Nikola Ciprich <nikola.ciprich@xxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: David Brown <david.brown@xxxxxxxxxxxx>
RE: mdadm raid1 read performance
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
RE: 6-drive RAID 10 failed, cannot reactivate, need help
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
RE: mdadm raid1 read performance
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
RE: mdadm raid1 read performance
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
RE: mdadm raid1 read performance
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
RE: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
RE: wish for Linux MD mirrored raid types
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
- From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Jonathan Tripathy <jonnyt@xxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Jonathan Tripathy <jonnyt@xxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: wish for Linux MD mirrored raid types
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: David Brown <david@xxxxxxxxxxxxxxx>
wish for Linux MD mirrored raid types
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: NeilBrown <neilb@xxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm raid1 read performance
- From: CoolCold <coolthecold@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: Nikolay Kichukov <hijacker@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm raid1 read performance
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxx>
Re: md question re: max_hw_sectors_kb
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Mirrored volume peformance questions
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
[PATCH 5/5] imsm: add new chunk size to metadata update
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 4/5] imsm: process update for raid level migrations
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 3/5] imsm: prepare memory for level migration update
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 2/5] imsm: fix: disable migration from raid5->raid0
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 1/5] imsm: prepare update for level migrations reshape
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 0/5] imsm support for raid0->raid5 migration
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
Re: Mirrored volume peformance questions
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: mdadm raid1 read performance
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: Mirrored volume peformance questions
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: mdadm raid1 read performance
- From: Drew <drew.kay@xxxxxxxxx>
Re: mdadm raid1 read performance
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm raid1 read performance
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
mdadm raid1 read performance
- From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
Re: Mirrored volume peformance questions
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: Mirrored volume peformance questions
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
md question re: max_hw_sectors_kb
- From: Michael Reed <mdr@xxxxxxx>
Re: Mirrored volume peformance questions
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Mirrored volume peformance questions
- From: "Morad, Steve" <morad@xxxxxxxxxx>
Re: Question regarding --backup-file
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david.brown@xxxxxxxxxxxx>
6-drive RAID 10 failed, cannot reactivate, need help
- From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
RE: Question regarding --backup-file
- From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Jameson Graef Rollins <jrollins@xxxxxxxxxxxxxxxxx>
Re: Question regarding --backup-file
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Question regarding --backup-file
- From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: NeilBrown <neilb@xxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: [PATCH 1/5] imsm: prepare update for level migrations reshape
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] imsm: FIX: Do not write check-point '0'
- From: NeilBrown <neilb@xxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Daniel Kahn Gillmor <dkg@xxxxxxxxxxxxxxxxx>
RE: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Jameson Graef Rollins <jrollins@xxxxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Daniel Kahn Gillmor <dkg@xxxxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: NeilBrown <neilb@xxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Jameson Graef Rollins <jrollins@xxxxxxxxxxxxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: pg_xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 r-m-w, op-journaled fs, SSDs
- From: Emmanuel Florac <eflorac@xxxxxxxxxxxxxx>
RAID6 r-m-w, op-journaled fs, SSDs
- From: pg_xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Growing 6 HDD RAID5 to 7 HDD RAID6
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
[PATCH] imsm: FIX: Do not write check-point '0'
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log
- From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Phil Turmel <philip@xxxxxxxxxx>
[PATCH 5/5] imsm: add new chunk size to metadata update
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 4/5] imsm: process update for raid level migrations
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 3/5] imsm: prepare memory for level migration update
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 2/5] imsm: fix: disable migration from raid5->raid0
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 1/5] imsm: prepare update for level migrations reshape
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 0/5] Support for IMSM raid0->raid5 migration
- From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Wolfgang Denk <wd@xxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: NeilBrown <neilb@xxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: RAID/dmaengine violates the dma-streaming API
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: RAID/dmaengine violates the dma-streaming API
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
Re: RAID/dmaengine violates the dma-streaming API
- From: saeed bishara <saeed.bishara@xxxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: NeilBrown <neilb@xxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm 3.2.1 doesn't compile with gcc 4.6.0
- From: NeilBrown <neilb@xxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
RE: mdadm 3.2.1 doesn't compile with gcc 4.6.0
- From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
RE: A few questions regarding RAID5/RAID6 recovery
- From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
Re: A few questions regarding RAID5/RAID6 recovery
- From: David Brown <david@xxxxxxxxxxxxxxx>
mdadm 3.2.1 doesn't compile with gcc 4.6.0
- From: Tobias Powalowski <t.powa@xxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
High mismatch count on root device - how to best handle?
- From: Mark Knecht <markknecht@xxxxxxxxx>
Re: A few questions regarding RAID5/RAID6 recovery
- From: Ryan Wagoner <rswagoner@xxxxxxxxx>
A few questions regarding RAID5/RAID6 recovery
- From: Kővári Péter <peter@xxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Seblu <seblu@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Drew <drew.kay@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: NeilBrown <neilb@xxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: NeilBrown <neilb@xxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: NeilBrown <neilb@xxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: NeilBrown <neilb@xxxxxxx>
Re: http://raid.wiki.kernel.org/ unreachable - need to "lend" clone of RAID1 HD to another machine
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
http://raid.wiki.kernel.org/ unreachable - need to mount HD clone of a RAID1 HD in other system to copy some files
- From: Vernon Tonnesen <jdcpa@xxxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
http://raid.wiki.kernel.org/ unreachable - need to "lend" clone of RAID1 HD to another machine
- From: Vernon Tonnesen <jdcpa@xxxxxxxxxxxxx>
Re: rhel5 raid6 corruption
- From: Robin Humble <robin.humble+raid@xxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: change from raid 5 to raid 6 interrupted
- From: Raphael Müller <rapmue@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: debian software raid1
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: "Majed B." <majedb@xxxxxxxxx>
Re: debian software raid1
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: NeilBrown <neilb@xxxxxxx>
Re: debian software raid1
- From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: change from raid 5 to raid 6 interrupted
- From: NeilBrown <neilb@xxxxxxx>
Re: debian software raid1
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: change from raid 5 to raid 6 interrupted
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: change from raid 5 to raid 6 interrupted
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: change from raid 5 to raid 6 interrupted
- From: Raphael Müller <rapmue@xxxxxxxxx>
Re: [Scst-devel] Tuning scst windows and sw raid5
- From: Chris Weiss <cweiss@xxxxxxxxx>
Re: [Scst-devel] Tuning scst windows and sw raid5
- From: Łukasz Oleś <lukasz.oles@xxxxxxxxxx>
Re: [Scst-devel] Tuning scst windows and sw raid5
- From: Chris Weiss <cweiss@xxxxxxxxx>
Tuning scst windows and sw raid5
- From: Łukasz Oleś <lukasz.oles@xxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Seblu <seblu@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID6
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID6
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: debian software raid1
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: NeilBrown <neilb@xxxxxxx>
Re:Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
RE: [PATCH 1/5] FIX: set delta_disks to 0 for raid5->raid0 transition
- From: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 2/2] Migration of externally managed arrays need major version to be set.
- From: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
[PATCH 1/2] UT: imsm reshape test suite update
- From: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
Re: Server down-failed RAID5-asking for some assistance
- From: David Brown <david.brown@xxxxxxxxxxxx>
Server down-failed RAID5-asking for some assistance
- From: John Valarti <mdadmuser@xxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: linux-next: Tree for April 21 (md/raid456)
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
Re: mismatch_cnt and Raid6
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: mismatch_cnt and Raid6
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: mismatch_cnt and Raid6
- From: Andrew Falgout <andrew.falgout@xxxxxxxxx>
Re: mismatch_cnt and Raid6
- From: NeilBrown <neilb@xxxxxxx>
mismatch_cnt and Raid6
- From: Andrew Falgout <andrew.falgout@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Ryan Wagoner <rswagoner@xxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: debian software raid1
- From: Asdo <asdo@xxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: debian software raid1
- From: Joe Landman <joe.landman@xxxxxxxxx>
Re: debian software raid1
- From: NeilBrown <neilb@xxxxxxx>
Re: debian software raid1
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: debian software raid1
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: debian software raid1
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: debian software raid1
- From: Gordon Henderson <gordon@xxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Iordan Iordanov <iordan@xxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Direct disk access on IBM Server
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Direct disk access on IBM Server
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: debian software raid1
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
debian software raid1
- From: b2 <b2@xxxxxxxxxxx>
Re: raid6 + caviar black + mpt2sas horrific performance
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
RE: [PATCH 0/4] Report new_disks number when migration is started
- From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
Re: [PATCH 0/4] Report new_disks number when migration is started
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: GPT on MD raid
- From: Jeremy Sanders <jeremy@xxxxxxxxxxxxxxxxx>
Re: GPT on MD raid
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: GPT on MD raid
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: GPT on MD raid
- From: Phil Turmel <philip@xxxxxxxxxx>
GPT on MD raid
- From: Jeremy Sanders <jeremy@xxxxxxxxxxxxxxxxx>
[PATCH] FIX: Check correctly raid disks during reshape restart
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
RE: [PATCH 0/4] Report new_disks number when migration is started
- From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
Re: [dm-devel] [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [dm-devel] [PATCH 05/10] block: remove per-queue plugging
- From: Hannes Reinecke <hare@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: Resync intermittently writes to spare drives, waking them up
- From: NeilBrown <neilb@xxxxxxx>
Re: expand raid10
- From: NeilBrown <neilb@xxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 0/4] Report new_disks number when migration is started
- From: NeilBrown <neilb@xxxxxxx>
Re: rhel5 raid6 corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Sven Eschenberg <sven@xxxxxxxxxxxxxxxxxxxxx>
RE: Recommended pci-e 1x SATA cards.
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
RAID/dmaengine violates the dma-streaming API
- From: saeed bishara <saeed.bishara@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: single threaded parity calculation ?
- From: Simon McNair <simon@xxxxxxxxxxxx>
Dying drive(s)... tips?
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: single threaded parity calculation ?
- From: Drew <drew.kay@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: single threaded parity calculation ?
- From: NeilBrown <neilb@xxxxxxx>
Re: single threaded parity calculation ?
- From: Simon Mcnair <simonmcnair@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: single threaded parity calculation ?
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: single threaded parity calculation ?
- From: Phil Turmel <philip@xxxxxxxxxx>
single threaded parity calculation ?
- From: Simon McNair <simon@xxxxxxxxxxxx>
Re: expand raid10
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: Seblu <seblu@xxxxxxxxx>
[PATCH 4/4] FIX: Count correctly added devices
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 3/4] FIX: Set proper raid disks during migration
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 2/4] FIX: Fiddle raid_disks number for external metadta
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 1/4] FIX: Always report new raid_disks during migration
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 0/4] Report new_disks number when migration is started
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Phil Turmel <philip@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Tapani Tarvainen <raid@xxxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Tapani Tarvainen <raid@xxxxxxxxxxxxxxxxxx>
Re: Recommended pci-e 1x SATA cards.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Recommended pci-e 1x SATA cards.
- From: Steven Haigh <netwiz@xxxxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Resync intermittently writes to spare drives, waking them up
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: expand raid10
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] md: fix unchecked interruptible mutex locks
- From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
RE: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: CoolCold <coolthecold@xxxxxxxxx>
Re: [PATCH 1/2] FIX: Use successfully loaded metadata only
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 1/2] FIX: In Grow_restart() array parameters are wrongly used
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone code cleanup
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone fix component list parsing
- From: NeilBrown <neilb@xxxxxxx>
[PATCH] md: fix unchecked interruptible mutex locks
- From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
Re: [PATCH] md: fix unchecked interruptible mutex locks
- From: NeilBrown <neilb@xxxxxxx>
Re: Fw: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Fw: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: expand raid10
- From: NeilBrown <neilb@xxxxxxx>
Re: expand raid10
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Resync intermittently writes to spare drives, waking them up
- From: Rory Jaffe <rsjaffe@xxxxxxxxx>
Re: iostat with raid device...
- From: NeilBrown <neilb@xxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: David Brown <david.brown@xxxxxxxxxxxx>
[PATCH] RAID-6 check standalone fix component list parsing
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Any pros or cons of using full disk versus partitons?
- From: David Miller <davem@xxxxxxxxxxxxx>
Re: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: help please - recovering from failed RAID5 rebuild
- From: sanktnelson 1 <sanktnelson@xxxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Re: expand raid10
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: expand raid10
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID6
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: expand raid10
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: NeilBrown <neilb@xxxxxxx>
Re: expand raid10
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: expand raid10
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: expand raid10
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
RE: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
expand raid10
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: NeilBrown <neilb@xxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID5
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID5
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: Growing layered raids
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID5
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID5
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Do I understand my RAID6 correctly?
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Re: Growing 6 HDD RAID5 to 7 HDD RAID5
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Growing 6 HDD RAID5 to 7 HDD RAID5
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
[PATCH 2/2] imsm: FIX: Be more patient during loading matadata
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 1/2] FIX: Use successfully loaded metadata only
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: Do I understand my RAID6 correctly?
- From: "Stefan G. Weichinger" <lists@xxxxxxxx>
Re: mse->metadata_version segmentation fault
- From: Jonathan Liu <net147@xxxxxxxxx>
Re: Do I understand my RAID6 correctly?
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Do I understand my RAID6 correctly?
- From: "Stefan G. Weichinger" <lists@xxxxxxxx>
mse->metadata_version segmentation fault
- From: Jonathan Liu <net147@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: Growing layered raids
- From: David Brown <david@xxxxxxxxxxxxxxx>
Re: mdadm 3.2.1 segfaults on archlinux while trying to use start in monitor mode
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
mdadm 3.2.1 segfaults on archlinux while trying to use start in monitor mode
- From: Tobias Powalowski <t.powa@xxxxxx>
Re: iostat with raid device...
- From: NeilBrown <neilb@xxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: Growing layered raids
- From: NeilBrown <neilb@xxxxxxx>
Re: Growing layered raids
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
Re: Growing layered raids
- From: NeilBrown <neilb@xxxxxxx>
Growing layered raids
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: tune2fs can't be used on a mounted ext4, or...?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
[PATCH 2/2] FIX: Set reshape parameters for all disks belongs to new array geometry
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 1/2] FIX: In Grow_restart() array parameters are wrongly used
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: tune2fs can't be used on a mounted ext4, or...?
- From: "Ted Ts'o" <tytso@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
Re: Unconventional reshape - a success story
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Unconventional reshape - a success story
- From: NeilBrown <neilb@xxxxxxx>
Re: iostat with raid device...
- From: NeilBrown <neilb@xxxxxxx>
Unconventional reshape - a success story
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: iostat with raid device...
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: iostat with raid device...
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: [PATCH] FIX: Raid0 expansion cannot be restarted
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH 05/10] block: remove per-queue plugging
- From: NeilBrown <neilb@xxxxxxx>
RE: RAID6 simply does not start as /dev/md8
- From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
Re: Raid 5 to 6 grow stalled
- From: NeilBrown <neilb@xxxxxxx>
[PATCH][Trivial] md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
- From: Jesper Juhl <jj@xxxxxxxxxxxxx>
Re: Raid 5 to 6 grow stalled
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
Re: Raid 5 to 6 grow stalled
- From: "Edward Siefker" <hatta00@xxxxxxxxxxx>
Re: Using of RAID10,offset for faster writes
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: Couple of questions.
- From: NeilBrown <neilb@xxxxxxx>
Re: Couple of questions.
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Raid 5 to 6 grow stalled
- From: NeilBrown <neilb@xxxxxxx>
Re: tune2fs can't be used on a mounted ext4, or...?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: tune2fs can't be used on a mounted ext4, or...?
- From: Andreas Dilger <adilger@xxxxxxxxx>
RAID0 as a member of RAID6
- From: Roman Mamedov <rm@xxxxxxxxxx>
tune2fs can't be used on a mounted ext4, or...?
- From: Roman Mamedov <rm@xxxxxxxxxx>
Re: Raid 5 to 6 grow stalled
- From: "Edward Siefker" <hatta00@xxxxxxxxxxx>
Raid 5 to 6 grow stalled
- From: "Edward Siefker" <hatta00@xxxxxxxxxxx>
Couple of questions.
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Using of RAID10,offset for faster writes
- From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: rob pfile <rpfile@xxxxxxxxx>
Using of RAID10,offset for faster writes
- From: David Brown <david.brown@xxxxxxxxxxxx>
Re: help please - recovering from failed RAID5 rebuild
- From: NeilBrown <neilb@xxxxxxx>
Re: help please - recovering from failed RAID5 rebuild
- From: sanktnelson 1 <sanktnelson@xxxxxxxxxxxxxx>
Re: iostat with raid device...
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: rhel5 raid6 corruption
- From: Robin Humble <robin.humble+raid@xxxxxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: iostat with raid device...
- From: NeilBrown <neilb@xxxxxxx>
Re: iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: iostat with raid device...
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
iostat with raid device...
- From: Linux Raid Study <linuxraid.study@xxxxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: Nagilum <nagilum@xxxxxxxxxxx>
Re: What the heck happened to my array?
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Yann Ormanns <yann-ormanns@xxxxxx>
[PATCH] FIX: Raid0 expansion cannot be restarted (v2)
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: NeilBrown <neilb@xxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: NeilBrown <neilb@xxxxxxx>
Re: help please - recovering from failed RAID5 rebuild
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: NeilBrown <neilb@xxxxxxx>
[PATCH] FIX: Raid0 expansion cannot be restarted
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: rhel5 raid6 corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: What the heck happened to my array?
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: NeilBrown <neilb@xxxxxxx>
Re: RAID6 simply does not start as /dev/md8
- From: Roman Mamedov <rm@xxxxxxxxxx>
RAID6 simply does not start as /dev/md8
- From: Yann Ormanns <yann-ormanns@xxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: What the heck happened to my array?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: rob pfile <rpfile@xxxxxxxxx>
Re: RAID6 data-check took almost 2 hours, clicking sounds, system unresponsive
- From: Gavin Flower <gavinflower@xxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: Nagilum <nagilum@xxxxxxxxxxx>
help please - recovering from failed RAID5 rebuild
- From: sanktnelson 1 <sanktnelson@xxxxxxxxxxxxxx>
Re: rhel5 raid6 corruption
- From: Robin Humble <robin.humble+raid@xxxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: 4-disk raid5 with 2 disks going bad: best way to proceed?
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
4-disk raid5 with 2 disks going bad: best way to proceed?
- From: rob pfile <rpfile@xxxxxxxxx>
Re: [PATCH] FIX: Cleanup after raid45->raid0 takeover
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone code cleanup
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: [PATCH 1/3] imsm: Warn user about reboot risk
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone md device
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
[PATCH 3/3] imsm: fix: report aligned component size value
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 2/3] imsm: FIX: Check array alignment before expansion
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
[PATCH 1/3] imsm: Warn user about reboot risk
- From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
Re: What the heck happened to my array?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: What the heck happened to my array?
- From: NeilBrown <neilb@xxxxxxx>
Re: What the heck happened to my array?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: Mdadm, udev and fakeraid?
- From: NeilBrown <neilb@xxxxxxx>
Re: What the heck happened to my array?
- From: NeilBrown <neilb@xxxxxxx>
Re: rhel5 raid6 corruption
- From: NeilBrown <neilb@xxxxxxx>
Re: raid1 boot regression in 2.6.37 [bisected]
- From: NeilBrown <neilb@xxxxxxx>
Re: What the heck happened to my array?
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
Re: [PATCH 1/2] Create: check for UnSet when looking at chunk
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] FIX: After discarding array give chance monitor to remove it
- From: NeilBrown <neilb@xxxxxxx>
Re: mdadm 3.2.1: Segfaulting with -p
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone code cleanup
- From: NeilBrown <neilb@xxxxxxx>
Re: [PATCH] RAID-6 check standalone md device
- From: NeilBrown <neilb@xxxxxxx>
[PATCH] RAID-6 check standalone code cleanup
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: What the heck happened to my array? (No apparent data loss).
- From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
rhel5 raid6 corruption
- From: Robin Humble <robin.humble+raid@xxxxxxxxxx>
Re: What the heck happened to my array? (No apparent data loss).
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]