6-drive RAID 10 failed, cannot reactivate, need help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

I have an Ubuntu Hardy 64-bit system with mdadm 2.6.9.

I have a 6-drive RAID 10 named md1. Unfortunately, there was some
power outage and when the system came back up, it showed 2 drives as
failed and 4 as active. I removed the two failed drives from the array
using -r, and then added them back in using --add and --force. The
array will not rebuild though. It simply shows now these two drives as
spares.

I doubt the data is actually lost since it was a sudden outage. What
can I do from here to get mdadm to activate this array and kick off
rebuild if needed? I'm really stuck. Thanks in advance for any help.

Best regards,
Tommy
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux