Am I right in thinking that you cannot grow the size of a raid array
that is build on top of other arrays?
I am doing some experiments at the moment with small loopback devices
mapped to files on a tmpfs file system - the idea being I can play
around with my fake "disks" without any risk, and with resync times
faster than I can type.
My setup is like this (in case anyone wants to try it) :
mount -t tmpfs tmpfs /root/loops
dd if=/dev/zero of=/root/loops/loop1 bs=1M count=128
dd if=/dev/zero of=/root/loops/loop2 bs=1M count=128
dd if=/dev/zero of=/root/loops/loop3 bs=1M count=128
dd if=/dev/zero of=/root/loops/loop4 bs=1M count=160
dd if=/dev/zero of=/root/loops/loop5 bs=1M count=160
dd if=/dev/zero of=/root/loops/loop6 bs=1M count=160
losetup /dev/loop1 /root/loops/loop1
...
losetup /dev/loop6 /root/loops/loop6
This gives me 6 "disks" - 3 x 128 MB disks, and 3 x 160 MB disks.
Make some single-disk "mirrors":
mdadm --create /dev/md/mdpair1 --level=1 --force -n 1 /dev/loop1
mdadm --create /dev/md/mdpair2 --level=1 --force -n 1 /dev/loop2
mdadm --create /dev/md/mdpair3 --level=1 --force -n 1 /dev/loop3
Make a raid5 with no redundancy, so it's easy to see if something goes
horribly wrong:
mdadm --create /dev/md/mdr --level=5 -n 4 /dev/md/mdpair1
/dev/md/mdpair2 /dev/md/mdpair3 missing
Make and mount a file system, and put some data on it - so we can check
the data is still there.
mkfs.ext4 /dev/md/mdr
mkdir m
mount /dev/md/mdr m
cp -r /usr/share m
At this stage, I've got a degraded raid5 with about 384MB space, in use
as a mounted file system.
Now I want to swap out each of my 128 MB "disks" with 160 MB "disks". I
want to do that without reducing the redundancy of the main raid (in the
real world, it would be raid 6 - not a degraded raid 5), and by using
mirror copies to minimise the strain on the other disks.
Add a new disk as a "hot spare" to a pair:
mdadm --add /dev/md/mdpair1 /dev/loop4
Change it to being a 2-drive mirror
mdadm --grow /dev/md/mdpair1 -n 2
Wait for the sync to complete...
Remove the small disk and change it back to a 1-drive mirror
mdadm --fail /dev/md/mdpair1 /dev/loop1
mdadm --remove /dev/md/mdpair1 /dev/loop1
mdadm --grow /dev/md/mdpair1 -n 1 --force
Now I can grow the one-disk mirror to use the whole new disk:
mdadm --grow /dev/md/mdpair1 --size=max
Repeat the procedure for the other two mdpair components.
My raid5 array is build on top of these three raid1 mirrors, which have
now all increased from 128 MB to 160 MB (confirmed by mdadm --detail and
blockdev --report).
But when I try to grow the raid 5 array, nothing happens:
mdadm --grow /dev/md/mdr --size=max
I am still getting a "component size" of 128 MB.
If I do the same setup, but build the raid5 array directly from the 128
MB loopback devices, then add the 160 MB devices, then remove the 128 MB
devices (after appropriate resyncs, of course), then I can grow the raid
5 array as expected.
Am I doing something wrong here, or is this a limitation of hierarchical
raid setups?
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
