On Mon, 02 May 2011 11:11:25 +0200, David Brown <david@xxxxxxxxxxxxxxx> wrote: > This is not directly related to your issues here, but it is possible to > make a 1-disk raid1 set so that you are not normally degraded. When you > want to do the backup, you can grow the raid1 set with the usb disk, > want for the resync, then fail it and remove it, then "grow" the raid1 > back to 1 disk. That way you don't feel you are always living in a > degraded state. Hi, David. I appreciate the concern, but I am not at all concerned about "living in a degraded state". I'm far more concerned about data loss and the fact that this bug has seemingly revealed that some commonly held assumptions and uses of software raid are wrong, with potentially far-reaching affects. I also don't see how the setup you're describing will avoid this bug. If this bug is triggered by having a layer between md and the filesystem and then changing the raid configuration by adding or removing a disk, then I don't see how there's a difference between hot-adding to a degraded array and growing a single-disk raid1. In fact, I would suspect that your suggestion would be more problematic because it involves *two* raid reconfigurations (grow and then shrink) rather than one (hot-add) to achieve the same result. I imagine that each raid reconfiguration could potentially triggering the bug. But I still don't have a clear understanding of what is going on here to be sure. jamie.
Attachment:
pgpxIHDWBv_F4.pgp
Description: PGP signature
