Re: Bug#624343: linux-image-2.6.38-2-amd64: frequent message "bio too big device md0 (248 > 240)" in kern.log

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/05/2011 00:06, Jameson Graef Rollins wrote:
On Fri, 29 Apr 2011 05:39:40 +0100, Ben Hutchings<ben@xxxxxxxxxxxxxxx>  wrote:
On Wed, 2011-04-27 at 09:19 -0700, Jameson Graef Rollins wrote:
I run what I imagine is a fairly unusual disk setup on my laptop,
consisting of:

   ssd ->  raid1 ->  dm-crypt ->  lvm ->  ext4

I use the raid1 as a backup.  The raid1 operates normally in degraded
mode.  For backups I then hot-add a usb hdd, let the raid1 sync, and
then fail/remove the external hdd.

This is not directly related to your issues here, but it is possible to make a 1-disk raid1 set so that you are not normally degraded. When you want to do the backup, you can grow the raid1 set with the usb disk, want for the resync, then fail it and remove it, then "grow" the raid1 back to 1 disk. That way you don't feel you are always living in a degraded state.


--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux