Linux RAID Storage Date Index

• Thread Index

• mdadm 3.2.1 segfaulting on boot when missing RaidDevice 0
  • From: "Lawrence, Joe" <Joe.Lawrence@xxxxxxxxxxx>
• Re: mark spare as active sync device?
  • From: Lars Täuber <taeuber@xxxxxxx>
• [PATCH] gcc warnings again
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: md 3.2.1 and xfs kernel panic on Linux 2.6.38
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: mdadm and disk failures
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: mdadm and disk failures
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm and disk failures
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• mdadm and disk failures
  • From: Mike Power <mpower@xxxxxxxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: md 3.2.1 and xfs kernel panic on Linux 2.6.38
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: md 3.2.1 and xfs kernel panic on Linux 2.6.38
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: [PATCH/RFC] Fix resync hang after surprise removal
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mark spare as active sync device?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH/RFC] Fix resync hang after surprise removal
  • From: Jim Paradis <jparadis@xxxxxxxxxx>
• Re: [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• mark spare as active sync device?
  • From: Lars Täuber <taeuber@xxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: [PATCH RESEND 0/5] md/raid10 changes
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH RESEND 0/5] md/raid10 changes
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 5/5] md/raid10: spread read for subordinate r10bios during recovery
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 5/5] md/raid10: spread read for subordinate r10bios during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH v2 4/5] md/raid10: share pages between read and write bio's during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 3/5] md/raid10: factor out common bio handling code
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 2/5] md/raid10: get rid of duplicated conditional expression
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH v2 1/5] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH RESEND 0/5] md/raid10 changes
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH] imsm: Metadata Attributes compatibility support
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] imsm: FIX: Sometimes reshape cannot be finished
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] imsm: Metadata Attributes compatibility support
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH] imsm: FIX: Sometimes reshape cannot be finished
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• RE: [PATCH 1/4] imsm: FIX: Cannot create volume
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: [PATCH 1/3] md/raid5: fix raid5_set_bi_hw_segments
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH/RFC] md/multipath: implement I/O balancing
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/2] imsm: FIX: klocwork: passed dev pointer to is_gen_migration() can be NULL
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/4] FIX: Cannot create volume
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/4] imsm: FIX: Cannot create volume
  • From: NeilBrown <neilb@xxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Tim Blundell <tim.blundell@xxxxxxxxx>
• [PATCH 2/3] md/raid5: fix FUA request handling in ops_run_io()
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 3/3] md/raid5: remove unusual use of bio_iovec_idx()
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 1/3] md/raid5: fix raid5_set_bi_hw_segments
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• md 3.2.1 and xfs kernel panic on Linux 2.6.38
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Why do I get different results for 'mdadm --detail' & 'mdadm --examine' for the same array?
  • From: jeffs_linux@xxxxxxxxxxx
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• mdadm: failed to RUN_ARRAY /dev/md0: Input/output error
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Disk upgrade
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re:
  • From: Phil Turmel <philip@xxxxxxxxxx>
• [no subject]
  • From: "Dragon" <Sunghost@xxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: HDD reports errors while completing RAID6 array check
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• HDD reports errors while completing RAID6 array check
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• RE: Backup Server RAID Array Event Notification
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• raid5 wont start
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: Phil Turmel <philip@xxxxxxxxxx>
• [PATCH] mdadm: Linux 3.x version change
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: Bill Davidsen <davidsen@xxxxxxx>
• Disk upgrade
  • From: Bill Davidsen <davidsen@xxxxxxx>
• [PATCH 2/2] imsm: FIX: klocwork: passed dev pointer to is_gen_migration() can be NULL
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/2] imsm: Fix: klocwork: targets variable can be used uninitialized
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/2] IMSM Checkpointing Bug Fix Series (3)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Why move all map_sg/unmap_sg for slave channel to its client?
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [no subject]
  • From: "Dragon" <Sunghost@xxxxxx>
• [PATCH] imsm: FIX: Migration Raid0->Raid5 cannot be restarted correctly
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: Christoph Dittmann <linux-raid@xxxxxxxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: Phil Turmel <philip@xxxxxxxxxx>
• [PATCH/RFC] md/multipath: implement I/O balancing
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH] imsm: FIX: Raid5 data corruption data recovering from backup
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: "Dragon" <Sunghost@xxxxxx>
• Re: Why move all map_sg/unmap_sg for slave channel to its client?
  • From: viresh kumar <viresh.kumar@xxxxxx>
• [PATCH/RFC] md/raid10: spread read for subordinate r10bios during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: Triple-parity raid6
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• RE: Backup Server RAID Array Event Notification
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Backup Server RAID Array Event Notification
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: [CentOS] Possible to use multiple disk to bypass I/O wait?
  • From: Steve Thompson <smt@xxxxxxxxxxxx>
• RE: Backup Server RAID Array Event Notification
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Backup Server RAID Array Event Notification
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• FW: Backup Server RAID Array Event Notification
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Why move all map_sg/unmap_sg for slave channel to its client?
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v2] md/raid10: share pages between read and write bio's during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: Possible to use multiple disk to bypass I/O wait?
  • From: Emmanuel Noobadmin <centos.admin@xxxxxxxxx>
• [PATCH 4/4] imsm: FIX: Disable automatic metadata rollback for broken reshape
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 3/4] imsm: FIX: Use function to obtain array layout
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 2/4] FIX: Cannot create volume
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 1/4] imsm: FIX: Cannot create volume
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 0/4] IMSM Checkpointing Bug Fix Series (2)
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: [BUG?] RAID not properly assembled w/ kernel 2.6.39.x
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re:
  • From: Phil Turmel <philip@xxxxxxxxxx>
• [BUG?] RAID not properly assembled w/ kernel 2.6.39.x
  • From: Matthias Dahl <ml_linux_raid@xxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• [no subject]
  • From: "Dragon" <Sunghost@xxxxxx>
• Re: Possible to use multiple disk to bypass I/O wait?
  • From: Nagilum <nagilum@xxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: NeilBrown <neilb@xxxxxxx>
• Re:
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Unstable speed or correct?
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• Re: Triple-parity raid6
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Unstable speed or correct?
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• Re: Possible to use multiple disk to bypass I/O wait?
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Unstable speed or correct?
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Possible to use multiple disk to bypass I/O wait?
  • From: Emmanuel Noobadmin <centos.admin@xxxxxxxxx>
• Re: Unstable speed or correct?
  • From: Pol Hallen <raid2@xxxxxxxxxxxxxx>
• Unstable speed or correct?
  • From: Pol Hallen <raid2@xxxxxxxxxxxxxx>
• [no subject]
  • From: "Dragon" <Sunghost@xxxxxx>
• RE: [PATCH 01/21] imsm: FIX: Cannot create volume
  • From: "Kwolek, Adam" <adam.kwolek@xxxxxxxxx>
• Re: [PATCH 00/21] IMSM Checkpointing Bug Fix Series
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 01/21] imsm: FIX: Cannot create volume
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] md/raid10: share pages between read and write bio's during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH] md/raid10: share pages between read and write bio's during recovery
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Triple-parity raid6
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] MD: use is_power_of_2 macro
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Growing a RAID-0 "internally"?
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Triple-parity raid6
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Growing a RAID-0 "internally"?
  • From: "Patrick J. LoPresti" <lopresti@xxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: "Dragon" <Sunghost@xxxxxx>
• [PATCH] md/raid10: share pages between read and write bio's during recovery
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH] MD: use is_power_of_2 macro
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 8 of 8 - v2] MD: raid5 do not set fullsync
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 7 of 8 - v2] MD: add bitmap support
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: SRaid with 13 Disks crashed
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [no subject]
  • From: "Dragon" <Sunghost@xxxxxx>
• [PATCH 21/21] MAN: Man update for check-pointing
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 20/21] imsm: Optimize expansion speed when no backup is required
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 19/21] imsm: FIX: Remove timeout from wait_for_reshape_imsm()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 18/21] imsm: FIX: wait_for_reshape_imsm() cleanup
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 17/21] imsm: FIX: Do not continue reshape when backup exists
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 16/21] FIX: Move buffer to next location
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 15/21] imsm: FIX: Remove unused variables and code
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 14/21] imsm: FIX: Move reshape_progress forward
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 13/21] imsm: FIX: Detect failed devices during recover_backup_imsm()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 12/21] imsm: FIX: Use metadata information for restore_stripes() and save_stripes()
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 11/21] imsm: FIX: Remove unused parameter from save_backup_imsm() interface
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 10/21] imsm: FIX: Do not use pba_of_lba0 for copy position calculation
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 09/21] imsm: FIX: Do not verify unused parameters
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 08/21] imsm: FIX: Calculate backup location based on metadata information
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 07/21] imsm: FIX: Use macros to data access
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 06/21] imsm: FIX: Check layout for level migration
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 05/21] imsm: FIX: Max position could not be rounded to MB
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 04/21] imsm: FIX: Detect migration end during migration record saving
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 03/21] imsm: FIX: Verify if migration record is loaded correctly
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 02/21] imsm: FIX: Opened handle is not closed
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 01/21] imsm: FIX: Cannot create volume
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• [PATCH 00/21] IMSM Checkpointing Bug Fix Series
  • From: Adam Kwolek <adam.kwolek@xxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• [PATCH] md/raid10: get rid of duplicated conditional expression
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• [PATCH] md/raid10: optimize read_balance() for 'far offset' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• RE: [PATCH 00/22] IMSM checkpointing implementation
  • From: "Wojcik, Krzysztof" <krzysztof.wojcik@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• Re: Nested RAID and booting
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: [PATCH 00/22] IMSM checkpointing implementation
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 07/22] imsm: Add wait_for_reshape_imsm() implementation
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH/RFC] md/raid10: optimize read_balance() for 'far copies' arrays
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: [PATCH 06/22] FIX: Initialize reshape structure
  • From: NeilBrown <neilb@xxxxxxx>
• Nested RAID and booting
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: [PATCH 0 of 8] Various MD patches to support device-mapper interaction
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 8 of 8] MD: raid5 do not set fullsync
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 7 of 8] MD: add bitmap support
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2/2] md/bitmap: remove unused fields from struct bitmap
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] md/bitmap: use proper accessor macro
  • From: NeilBrown <neilb@xxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: Thomas Harold <thomas-lists@xxxxxxxxxx>
• [PATCH 8 of 8] MD: raid5 do not set fullsync
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 7 of 8] MD: add bitmap support
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 6 of 8] MD: add sync_super to mddev_t struct
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 5 of 8] MD: raid1 changes to allow use by device mapper
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 4 of 8] MD: move thread wakeups into resume
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 3 of 8] MD: possible typo
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 2 of 8] MD: no sync IO while suspended
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 1 of 8] MD: no integrity register if no gendisk
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• [PATCH 0 of 8] Various MD patches to support device-mapper interaction
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• Re: md array does not detect drive removal: mdadm 3.2.1, Linux 2.6.38
  • From: NeilBrown <neilb@xxxxxxx>
• Re: from 2x RAID1 to 1x RAID6 ?
  • From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
• from 2x RAID1 to 1x RAID6 ?
  • From: "Stefan G. Weichinger" <lists@xxxxxxxx>
• [PATCH 2/2] md/bitmap: remove unused fields from struct bitmap
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 1/2] md/bitmap: use proper accessor macro
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: md array does not detect drive removal: mdadm 3.2.1, Linux 2.6.38
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: sector I/O error cause disk to be "faulty" in raid5
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• 2.6.39[.1]: raid1 check blocks jbd on other md more than 120 seconds -- workaround
  • From: Frank van Maarseveen <frankvm@xxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: md array does not detect drive removal: mdadm 3.2.1, Linux 2.6.38
  • From: CoolCold <coolthecold@xxxxxxxxx>
• md array does not detect drive removal: mdadm 3.2.1, Linux 2.6.38
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: RAID5: failing an active component during spare rebuild - arrays hangs
  • From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• Re: Maximizing failed disk replacement on a RAID5 array
  • From: Drew <drew.kay@xxxxxxxxx>
• sector I/O error cause disk to be "faulty" in raid5
  • From: hank peng <pengxihan@xxxxxxxxx>
• RAID5: failing an active component during spare rebuild - arrays hangs
  • From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
• Fwd: Maximizing failed disk replacement on a RAID5 array
  • From: Durval Menezes <durval.menezes@xxxxxxxxx>
• [PATCH 4/8] md/raid: use printk_ratelimited instead of printk_ratelimit
  • From: Christian Dietrich <christian.dietrich@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 2.6.39: raid1 check blocks jbd on other md more than 120 seconds
  • From: Frank van Maarseveen <frankvm@xxxxxxxxxxx>
• Re: 2.6.39: raid1 check blocks jbd on other md more than 120 seconds
  • From: Thomas Harold <thomas-lists@xxxxxxxxxx>
• Re: 2.6.39: raid1 check blocks jbd on other md more than 120 seconds
  • From: Frank van Maarseveen <frankvm@xxxxxxxxxxx>
• [PATCH 22/22] imsm: Unit Tests - remove backup-file during grow command
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 21/22] imsm: Remove user warning before reshape start
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 20/22] Do not use backup file for external metadata
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 19/22] FIX: Enable metadata updates for raid0
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 18/22] imsm: Apply checkpoint metadata update for general migration
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 17/22] imsm: Prepare checkpoint update for general migration
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 16/22] imsm: Add metadata update type for general migration check-pointing
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 14/22] imsm: Implement recover_backup_imsm() for imsm metadata
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 15/22] imsm: Disable checkpoint updating by mdmon for general migration
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 13/22] Add reshape restart support for external metadata
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 12/22] imsm: update blocks_per_migr_unit() to support migration record
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 09/22] imsm: Check if array degradation has been changed
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 11/22] imsm: Add information about migration record to mdadm '-E' option
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 10/22] imsm: Clear migration record when no migration in progress
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 08/22] imsm: Implement imsm_manage_reshape(), reshape workhorse
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 07/22] imsm: Add wait_for_reshape_imsm() implementation
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 05/22] imsm: check migration compatibility
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 06/22] FIX: Initialize reshape structure
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 04/22] imsm: Add support for copy area and backup operations
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 03/22] Define dummy functions to mdmon.c
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 02/22] Support restore_stripes() from the given buffer
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 00/22] IMSM checkpointing implementation
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH 01/22] imsm: Add migration record to intel_super
  • From: Krzysztof Wojcik <krzysztof.wojcik@xxxxxxxxx>
• [PATCH] md/raid1: use local list for pending write-bio in make_request()
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: 2.6.39: raid1 check blocks jbd on other md more than 120 seconds
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• 2.6.39: raid1 check blocks jbd on other md more than 120 seconds
  • From: Frank van Maarseveen <frankvm@xxxxxxxxxxx>
• Re: [PATCH 2/2] md: check ->hot_remove_disk when removing disk
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/2] md: convert double atomic_inc() to atomic_add()
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 1/2] md: convert double atomic_inc() to atomic_add()
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• [PATCH 2/2] md: check ->hot_remove_disk when removing disk
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: About monitor raid event using poll/select
  • From: NeilBrown <neilb@xxxxxxx>
• About monitor raid event using poll/select
  • From: "majianpeng" <majianpeng@xxxxxxxxx>
• Re: Raid1 info (not active degraded raid)
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Raid1 info (not active degraded raid)
  • From: Pol Hallen <raid2@xxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• rebuild after reboot
  • From: "Pol Hallen" <raid1@xxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: Simon McNair <simonmcnair@xxxxxxxxx>
• RE: creating degraded raid1 with imsm metadata
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: Stefan /*St0fF*/ Hübner <st0ff@xxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• [PATCH] md: use proper little-endian bitops
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: Optimizing small IO with md RAID
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: filesystem-level tool to validate array
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: filesystem-level tool to validate array
  • From: Bernd Schubert <bernd.schubert@xxxxxxxxxxx>
• Optimizing small IO with md RAID
  • From: "fibreraid@xxxxxxxxx" <fibreraid@xxxxxxxxx>
• Re: filesystem-level tool to validate array
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• Re: disable raid autodetect at boot
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• mdadm not creating symlinks for partitioned arrays
  • From: linbloke <linbloke@xxxxxxxxxxx>
• filesystem-level tool to validate array
  • From: Michael Stumpf <mjstumpf@xxxxxxxxx>
• Re: Question on md126 / md127 issues
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Question on md126 / md127 issues
  • From: Dylan Distasio <interzone@xxxxxxxxx>
• [TRIVIAL PATCH next 00/15] treewide: Convert vmalloc/memset to vzalloc
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [TRIVIAL PATCH next 07/15] md: Convert vmalloc/memset to vzalloc
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: creating degraded raid1 with imsm metadata
  • From: FDi <fld@xxxxxxxxxx>
• Re: race condition in md creation?
  • From: Stijn Hoop <stijn@xxxxxxxxxx>
• Re: Upgrading from metadata 0.9
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Question on md126 / md127 issues
  • From: NeilBrown <neilb@xxxxxxx>
• Re: race condition in md creation?
  • From: NeilBrown <neilb@xxxxxxx>
• RE: Mdadm re-add fails
  • From: "Schmidt, Annemarie" <Annemarie.Schmidt@xxxxxxxxxxx>
• race condition in md creation?
  • From: Stijn Hoop <stijn@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Torbjørn Skagestad <torbjorn@xxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• RE: Storage device enumeration script
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Upgrading from metadata 0.9
  • From: Phillip Susi <psusi@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: Torbjørn Skagestad <torbjorn@xxxxxxxx>
• Re: Can not start md0 after upgrade. SOLVED
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Can not start md0 after upgrade. SOLVED
  • From: John McMonagle <johnm@xxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• RE: creating degraded raid1 with imsm metadata
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: [PATCH 2 of 9] MD: should_read_superblock
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Torbjørn Skagestad <torbjorn@xxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Torbjørn Skagestad <torbjorn@xxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Torbjørn Skagestad <torbjorn@xxxxxxxx>
• Re: Storage device enumeration script
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: CoolCold <coolthecold@xxxxxxxxx>
• creating degraded raid1 with imsm metadata
  • From: FDi <fld@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• RE: Storage device enumeration script
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Question on md126 / md127 issues
  • From: Dylan Distasio <interzone@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Storage device enumeration script
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Storage device enumeration script
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: [PATCH 7 of 9] MD: new sb type
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2 of 9] MD: should_read_superblock
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Can not start md0 after upgrade.
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Can not start md0 after upgrade.
  • From: John McMonagle <johnm@xxxxxxxxxxx>
• Re: Can not start md0 after upgrade.
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Can not start md0 after upgrade.
  • From: John McMonagle <johnm@xxxxxxxxxxx>
• Re: disable raid autodetect at boot
  • From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
• Re: Can not start md0 after upgrade.
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 7 of 9] MD: new sb type
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• Re: [PATCH 2 of 9] MD: should_read_superblock
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
• Can not start md0 after upgrade.
  • From: John McMonagle <johnm@xxxxxxxxxxx>
• Re: [PATCH 7 of 9] MD: new sb type
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 6 of 9] MD: no sync IO while suspended
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 2 of 9] MD: should_read_superblock
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1 of 9] MD: possible typo
  • From: NeilBrown <neilb@xxxxxxx>
• mdadm problem
  • From: retail.mdadm@xxxxxxxxx
• [PATCH] MD: raid1 changes to allow use by device mapper
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH] MD: move thread wakeups into resume
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 0 of 9] MD: Updates for dm-raid.c support
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 3 of 9] MD: allow analyze_sbs to fail
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 8 of 9] MD: add bitmap support
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 7 of 9] MD: new sb type
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 9 of 9] MD: raid5 do not set fullsync
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 4 of 9] MD: analyze_sbs failure if bad superblocks
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 1 of 9] MD: possible typo
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 2 of 9] MD: should_read_superblock
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 5 of 9] MD: no integrity register if no gendisk
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• [PATCH 6 of 9] MD: no sync IO while suspended
  • From: Jonathan Brassow <jbrassow@xxxxxxxxxxxxxx>
• Re: disable raid autodetect at boot
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: disable raid autodetect at boot
  • From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
• Re: HBA Adaptor Advice
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• HBA Adaptor Advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: disable raid autodetect at boot
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• disable raid autodetect at boot
  • From: Alexander Lyakas <alex.bolshoy@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stefan /*St0fF*/ Hübner <stefan.huebner@xxxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Jim Schatzman <James.Schatzman@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Johannes Truschnigg <johannes@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Performarce raid6 degraded
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Simon McNair <simonmcnair@xxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• RE: HBA Adaptor advice
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: HBA Adaptor advice
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: Performarce raid6 degraded
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm git, -Werror=unused-but-set-variable
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: mdadm git, -Werror=unused-but-set-variable
  • From: NeilBrown <neilb@xxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Performarce raid6 degraded
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• mdadm git, -Werror=unused-but-set-variable
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• RE: Software raid, booting and bios
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Western Digital giving away dual port pcie (2 lane) hba's
  • From: Daniel Reurich <daniel@xxxxxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Brad Campbell <brad@xxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Andy Smith <andy@xxxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: why should I "initialize" JBOD disks?
  • From: Alexander <freebsd@xxxxxxxxxxx>
• md resync looping
  • From: "Schmidt, Annemarie" <Annemarie.Schmidt@xxxxxxxxxxx>
• RE: Mdadm re-add fails
  • From: "Schmidt, Annemarie" <Annemarie.Schmidt@xxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: why should I "initialize" JBOD disks?
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• why should I "initialize" JBOD disks?
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Simon McNair <simonmcnair@xxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Simon Mcnair <simonmcnair@xxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: Software raid, booting and bios
  • From: Simon Mcnair <simonmcnair@xxxxxxxxx>
• Software raid, booting and bios
  • From: Paul van der Vlis <paul@xxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Did I make a mistake?
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• RE: Best way to create RAID-6 for swap partition - existing one failed
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Did I make a mistake?
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Andy Smith <andy@xxxxxxxxxxxxxx>
• Re: Mdadm re-add fails
  • From: NeilBrown <neilb@xxxxxxx>
• Re: HBA Adaptor advice
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Thomas Harold <thomas-lists@xxxxxxxxxx>
• Re: check which disk is a problem
  • From: Pol Hallen <raid2@xxxxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Michael Sallaway <michael@xxxxxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Mathias Burén <mathias.buren@xxxxxxxxx>
• Re: HBA Adaptor advice
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• HBA Adaptor advice
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• Re: check which disk is a problem
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: check which disk is a problem
  • From: Kay Diederichs <kay.diederichs@xxxxxxxxxxxxxxx>
• check which disk is a problem
  • From: Pol Hallen <raid1@xxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gordon Henderson <gordon@xxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: likewhoa <likewhoa@xxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: likewhoa <likewhoa@xxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: Best way to create RAID-6 for swap partition - existing one failed
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Mdadm re-add fails
  • From: "Schmidt, Annemarie" <Annemarie.Schmidt@xxxxxxxxxxx>
• Re: Unable to grow RAID 6 array
  • From: Laurent CARON <lcaron@xxxxxxxxxxxxxxxxx>
• Re: Unable to grow RAID 6 array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Unable to grow RAID 6 array
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Unable to grow RAID 6 array
  • From: Laurent CARON <lcaron@xxxxxxxxxxxxxxxxx>
• Re: Incompatibility of internal bitmap with ext4 barriers?
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• Re: permanently removing a spare
  • From: NeilBrown <neilb@xxxxxxx>
• Re: permanently removing a spare
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: Incompatibility of internal bitmap with ext4 barriers?
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: Incompatibility of internal bitmap with ext4 barriers?
  • From: Jason Tinker <jsntinker@xxxxxxxxx>
• Re: Incompatibility of internal bitmap with ext4 barriers?
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: repartitioning disks
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Incompatibility of internal bitmap with ext4 barriers?
  • From: Jason Tinker <jsntinker@xxxxxxxxx>
• Re: repartitioning disks
  • From: NeilBrown <neilb@xxxxxxx>
• repartitioning disks
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Best way to create RAID-6 for swap partition - existing one failed
  • From: Gavin Flower <gavinflower@xxxxxxxxx>
• Re: [PATCH] RAID-6 check standalone suspend array V2.0
  • From: NeilBrown <neilb@xxxxxxx>
• RE: /dev/md2 stopped after changing SAS controller
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: raid5 reshape failure - restart?
  • From: Glen Dragon <glen.dragon@xxxxxxxxx>
• Re: raid5 reshape failure - restart?
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] RAID-6 check standalone suspend array V2.0
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• raid5 reshape failure - restart?
  • From: Glen Dragon <glen.dragon@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Joe Landman <joe.landman@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• RE: Growing a RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
• RE: Growing a RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: Growing a RAID array
  • From: NeilBrown <neilb@xxxxxxx>
• RE: Growing a RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: /dev/md2 stopped after changing SAS controller
  • From: NeilBrown <neilb@xxxxxxx>
• /dev/md2 stopped after changing SAS controller
  • From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Rudy Zijlstra <rudy@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• Re: mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Phil Turmel <philip@xxxxxxxxxx>
• mdadm does not create partition devices whatsoever, "partitionable" functionality broken
  • From: Christopher White <linux@xxxxxxxxxxxxxx>
• RE: New device for RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: Growing a RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: New device for RAID array
  • From: NeilBrown <neilb@xxxxxxx>
• RE: New device for RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Growing a RAID array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: New device for RAID array
  • From: NeilBrown <neilb@xxxxxxx>
• Growing a RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• New device for RAID array
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• permanently removing a spare
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: reshape failure
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: [PATCH] Update documentation for sync_min and sync_max entries
  • From: NeilBrown <neilb@xxxxxxx>
• Re: reshape failure
  • From: NeilBrown <neilb@xxxxxxx>
• Re: reshape failure
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: reshape failure
  • From: NeilBrown <neilb@xxxxxxx>
• Re: reshape failure
  • From: Tobias McNulty <tobias@xxxxxxxxxxxxxxx>
• Re: [PATCH] Update documentation for sync_min and sync_max entries
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• [md PATCH 06/16] md/multipath: discard ->working_disks in favour of ->degraded
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 02/16] md: reject a re-add request that cannot be honoured.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 13/16] md/raid10: make more use of 'slot' in raid10d.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 01/16] md: Fix race when creating a new md device.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 07/16] md: make error_handler functions more uniform and correct.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 12/16] md/raid10: some tidying up in fix_read_error
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 11/16] md/raid1: improve handling of pages allocated for write-behind.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 03/16] md/bitmap: fix saving of events_cleared and other state.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 05/16] md/raid1: clean up read_balance.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 04/16] md: simplify raid10 read_balance
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 15/16] md/raid10: reformat some loops with less indenting.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 09/16] md/raid1: tidy up new functions: process_checks and fix_sync_read_error.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 10/16] md/raid1: try fix_sync_read_error before process_checks.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 14/16] md/raid10: remove unused variable.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 08/16] md/raid1: split out two sub-functions from sync_request_write
  • From: NeilBrown <neilb@xxxxxxx>
• Antw: Re: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Antw: Problems creating MD-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Re: Convert RAID 5 to RAID 6 while reducing array size
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• [md PATCH 16/16] md: allow resync_start to be set while an array is active.
  • From: NeilBrown <neilb@xxxxxxx>
• [md PATCH 00/16] md patches for 2.6.40
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: Dylan Distasio <interzone@xxxxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: NeilBrown <neilb@xxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: Dylan Distasio <interzone@xxxxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: NeilBrown <neilb@xxxxxxx>
• RE: RAID5 -> RAID6 conversion, please help
  • From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: Steven Haigh <netwiz@xxxxxxxxx>
• Re: RAID5 -> RAID6 conversion, please help
  • From: NeilBrown <neilb@xxxxxxx>
• RAID5 -> RAID6 conversion, please help
  • From: "Peter Kovari" <peter@xxxxxxxxxxxxxx>
• Re: [PATCH][Trivial] md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: NeilBrown <neilb@xxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• [PATCH] RAID-6 check standalone suspend array V2.0
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: Michael Reed <mdr@xxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Emmanuel Noobadmin <centos.admin@xxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: NeilBrown <neilb@xxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: [PATCH 0/5] imsm support for raid0->raid5 migration
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH] RAID-6 check standalone suspend array
  • From: NeilBrown <neilb@xxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
• [PATCH] RAID-6 check standalone suspend array
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Luca Berra <bluca@xxxxxxxxxx>
• Convert RAID 5 to RAID 6 while reducing array size
  • From: Anshuman Aggarwal <anshuman@xxxxxxxxxxxxx>
• Convert RAID 5 to RAID 6 while reducing array size
  • From: Anshuman Aggarwal <anshuman@xxxxxxxxxxxxx>
• 2.6.32.28 - md resync + pvmove - crash
  • From: Nikola Ciprich <nikola.ciprich@xxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: David Brown <david.brown@xxxxxxxxxxxx>
• RE: mdadm raid1 read performance
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• RE: 6-drive RAID 10 failed, cannot reactivate, need help
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: mdadm raid1 read performance
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: mdadm raid1 read performance
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: mdadm raid1 read performance
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
• RE: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• RE: wish for Linux MD mirrored raid types
  • From: "Leslie Rhorer" <lrhorer@xxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: Phil Turmel <philip@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Mikael Abrahamsson <swmike@xxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Problems creating MS-RAID1: "device .. not suitable for any style of raid array" / "Device or resource busy"
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Jonathan Tripathy <jonnyt@xxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Jonathan Tripathy <jonnyt@xxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: wish for Linux MD mirrored raid types
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• wish for Linux MD mirrored raid types
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: NeilBrown <neilb@xxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm raid1 read performance
  • From: CoolCold <coolthecold@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Nikolay Kichukov <hijacker@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roman Mamedov <rm@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: Bernd Schubert <bernd.schubert@xxxxxxxxxxxxxxxxxx>
• Re: md question re: max_hw_sectors_kb
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Mirrored volume peformance questions
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• [PATCH 5/5] imsm: add new chunk size to metadata update
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 4/5] imsm: process update for raid level migrations
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 3/5] imsm: prepare memory for level migration update
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 2/5] imsm: fix: disable migration from raid5->raid0
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 1/5] imsm: prepare update for level migrations reshape
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• [PATCH 0/5] imsm support for raid0->raid5 migration
  • From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@xxxxxxxxx>
• Re: Mirrored volume peformance questions
  • From: Keld Jørn Simonsen <keld@xxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Roberto Spadim <roberto@xxxxxxxxxxxxx>
• Re: Mirrored volume peformance questions
  • From: David Brown <david@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: Drew <drew.kay@xxxxxxxxx>
• Re: mdadm raid1 read performance
  • From: NeilBrown <neilb@xxxxxxx>
• Re: mdadm raid1 read performance
  • From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
• mdadm raid1 read performance
  • From: Liam Kurmos <quantum.leaf@xxxxxxxxx>