Re: HDD reports errors while completing RAID6 array check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/11/2011 5:49 AM, Mathias BurÃn wrote:
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (Adv. Format) family
Device Model:     WDC WD20EARS-00MVWB0
Serial Number:    WD-WMAZ20188479
Firmware Version: 50.0AB50
User Capacity:    2,000,398,934,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jun 11 10:48:05 2011 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Not certain if this was mentioned. While WDC WD20EARS drives can be used in an RAID array, WD recommends using there RAID capable drives in an enterprise environment. I tried using same drives in a simple RAID-1 array and had serious performance issues (sync taking a week) and stalls when writing to disk. Are you using the stock firmware on these drives?

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux