Re: /dev/md2 stopped after changing SAS controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, May 15, 2011 at 10:29:11AM -0400, Joe Landman wrote:
> 
> +1 to Mikael
> 
> We have a number of these.  They are pretty much useless.  We *do
> not recommend them for any purpose whatsoever*.  We got them to
> test, and they were and are wastes of money.
> 
> Again, this is why making sure that the bona fides of those making
> recommendations don't begin and end with a google search ...
> 
> >
> >Buy a 1068E (3081E) based card, they've been working fine for a long time.
> >
> 
> +1 on that.  We like the 3081E, and the 9211-8i for these purposes.
> Both work quite well.
> 
> Again, ignore these cards, they will absorb your money and your time.

Someone pointed me to ARECA non-raid controllers: 

http://www.areca.com.tw/products/sasnoneraid3g.htm

Does anyone have good or bad experiences with these?

Thanks,
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux