On 24/04/11 14:48, Drew wrote:
Hi David,
My goal here is to understand my options before deciding. I've had a bit of
space between getting the machine and actually having the time to put it
into service, so I've tested a bit and thought a bit and discussed a bit on
this mailing list. I'll probably go for hardware raid5 - which I could have
done in the beginning. But now I know more about why that's the sensible
choice.
I'm going to jump in a bit late but as an owner of several of these
little beasts and say this. You have a skookum RAID card on there so
use it. :) I'd also *strongly* recommend you jump for the BBU
(Battery) if you haven't already.
This hasn't been mentioned as a consideration but one more point of
going in favor with the HW RAID is this: You're away on vacation and a
drive dies. Your backup admin notices and calls an IBM monkey out to
replace the drive. He goes, finds the failed drive indicated by the
little warning light, and replaces it. You get back to find a zero
dollar service order on your desk. :-)
Yes, I understand the point about ease of maintenance for others -
that's already an issue for us, as I'm the only one who really
understands the systems we have. Of course, buying a hot-spare drive
will involve even less effort for the backup admin, and I'll probably do
that.
I don't know about your shop but that's how it'd play out in mine.
mdadm is a great product no doubt, but to work effectively with it
everyone involved has to understand it. If you're a one man show like
I am, with vendors who don't really touch linux (not as much money in
it vs M$), making your linux systems as foolproof as possible is
important, especially when the bosses are somewhat biased against it.
My vendor here does use Linux, but not in the way /I/ do. It's a
disadvantage of the flexibility and choice in the Linux world. (I have
no problem with the boss regarding Linux - it would cost more money just
to figure out what MS software and client licenses we would need than it
cost us to buy the Linux hardware.)
I've set up the system now with hardware raid5. I've used MegaCli to
monitor and test the system, and grow it online by adding another drive.
There is no doubt that the hardware raid card works, and it's fast,
and the little lights on the drives are a great idea.
But there is also no doubt that the MegaCli command line tool is
absolutely terrible in comparison to mdadm. It is downright
user-unfriendly. I haven't bothered with the LSI gui tools - they are
useless on a server, where there is no place for X. The "webbios" bios
setup is okay, but only available when rebooting the machine - it's fine
for the initial setup. So the only real tool that will work over a ssh
session while the system is running, is MegaCli. Since it is statically
linked it works with any system, which is nice. But the interface is
painfully unclear, sadistically inconsistent, and badly documented. If
an emergency situation arose, I could explain mdadm and dictate commands
over the phone to a backup admin - there's not a chance I could do that
with MegaCli.
Overall, with the server I have which came with the LSI card and no
clear way to get direct access to the disks, then using the hardware
raid is my best option. But for future purchases I would think very
hard before spending money on the same solution (for the same usage) -
I'd be inclined to spend the money on more disks than on the raid card.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
