LM Sensors

• Thread Index

• Re: Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• [PATCH] hwmon: (w83627hf) Document W83627THF voltage pin mapping
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: hwmon: (w83793) Drop useless mutex
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (fschmd) Drop useless mutex
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• hwmon: (w83793) Drop useless mutex
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: (it87) Fix manual fan speed control on IT8721F
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: (fschmd) Drop useless mutex
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Coretemp on Intel D510MO motherboard (Atom D510 CPU) not reliable
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• [PATCH] drivers/hwmon NTC Thermistor Initial Support
  • From: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
• Testing LM-Sensor Support of SCH5127 in Acer easyStore H340
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: Nuvoton W83677HG-I
  • From: Tapani Tarvainen <lmsensors@xxxxxxxxxxxxxxxxxx>
• Re: Intel Atom N550 coretemp
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Intel Atom N550 coretemp
  • From: Owl <owl@xxxxxxxx>
• Re: how to rename sensor variables
  • From: Andrey Repin <hell-for-yahoo@xxxxxxxx>
• Re: how to rename sensor variables
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: how to rename sensor variables
  • From: Jean-Philippe Orsini <jeanfi@xxxxxxxxx>
• Re: how to rename sensor variables
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: how to rename sensor variables
  • From: Andrey Repin <hell-for-yahoo@xxxxxxxx>
• how to rename sensor variables
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: Nuvoton W83677HG-I
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Nuvoton W83677HG-I
  • From: Andrea Rizzolo <andrea.rizzolo@xxxxxxxxx>
• Nuvoton W83677HG-I
  • From: Tapani Tarvainen <lmsensors@xxxxxxxxxxxxxxxxxx>
• Re: sensors.conf for GigaByte GA-790XTA-UD4
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH V2] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Re: Winbond Super I/O chip - Sensor values
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: ASRock board W83677HG-I
  • From: Andrea Rizzolo <andrea.rizzolo@xxxxxxxxx>
• [GIT PULL] hwmon fixes for 2.6.37-rc4
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Winbond Super I/O chip - Sensor values
  • From: Susmith P <susmith.p@xxxxxxxxx>
• Re: Further documentation for w83627hf module
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Further documentation for w83627hf module
  • From: Julian Brunner <julianbrunner@xxxxxxxxxxxxxx>
• Supermicro H8DC8 gotcha
  • From: "David Mathog" <mathog@xxxxxxxxxxx>
• Re: lm-sensors config file for Asus K8N-DL motherboard
  • From: no tellin <no.tellin@xxxxxxxxx>
• Re: Further documentation for w83627hf module
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• W83627DHG - Writing to gpio pins?
  • From: Brian Dunlavey <bdunlavey@xxxxxxxxxxx>
• Re: lm-sensors config file for Asus K8N-DL motherboard
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: lm-sensors config file for Asus K8N-DL motherboard
  • From: no tellin <no.tellin@xxxxxxxxx>
• Re: lm-sensors config file for Asus K8N-DL motherboard
  • From: no tellin <no.tellin@xxxxxxxxx>
• Antw: Re: Need help to fix some issues with the linux driver "i2c-gpio"
  • From: "Matthias Zacharias" <Matthias.Zacharias@xxxxxxxxxxxxxxxx>
• Re: Need help to fix some issues with the linux driver "i2c-gpio"
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Need help to fix some issues with the linux driver "i2c-gpio"
  • From: "Matthias Zacharias" <Matthias.Zacharias@xxxxxxxxxxxxxxxx>
• Re: lm-sensors config file for Asus K8N-DL motherboard
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• lm-sensors config file for Asus K8N-DL motherboard
  • From: no tellin <no.tellin@xxxxxxxxx>
• Re: it8726 chip?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: it8726 chip?
  • From: David Mathog <dmathog@xxxxxxxxx>
• Re: IT8721F fan control?
  • From: Alexandros Diamantidis <adia@xxxxxxxxx>
• Re: it8726 chip?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Foxconn 600A01-6LRS & VT1211, could use a second opinion on config
  • From: Jasmine <jasmine.aura@xxxxxxxxx>
• it8726 chip?
  • From: David Mathog <dmathog@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (lis3lv02d_i2c) Fix compile warnings
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (i5k_amb) Fix compile warning
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: (i5k_amb) Fix compile warning
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (lis3lv02d_i2c) Fix compile warnings
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Build warning in i5k_amb.c
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Build warning in i5k_amb.c
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lis3lv02d_i2c) Fix compile warnings if CONFIG_PM or CONFIG_PM_RUNTIME is undefined
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: MAX7501 support
  • From: "Steve Iribarne" <siribarne@xxxxxxxxxxxx>
• Re: MAX7501 support
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• MAX7501 support
  • From: Steve Iribarne <siribarne@xxxxxxxxxxxx>
• sensors.conf for GigaByte GA-790XTA-UD4
  • From: Ancoron Luciferis <ancoron@xxxxxxxxxxxxx>
• sensors.conf for GigaByte GA-770TA-UD3 (IT8720F rev. 8)
  • From: CHaoSlayeR <chaoslayer@xxxxxxxxxxxxx>
• sensors.conf for GigaByte GA-790XTA-UD4
  • From: Ancoron Luciferis <ancoron.luciferis@xxxxxxxxxxxxxx>
• sensors.conf for GigaByte GA-770TA-UD3 (IT8720F rev. 8)
  • From: Ancoron Luciferis <ancoron.luciferis@xxxxxxxxxxxxxx>
• Re: [RFC] [PATCH v2] ltc4215: Save the fault register at boot, make it accessible via sysfs
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [RFC] [PATCH v2] ltc4215: Save the fault register at boot, make it accessible via sysfs
  • From: Richard Retanubun <RichardRetanubun@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: "Ira W. Snyder" <iws@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: "Ira W. Snyder" <iws@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Richard Retanubun <RichardRetanubun@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/3] Print the status of fault register at boot before clearing it.
  • From: Richard Retanubun <RichardRetanubun@xxxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Atom D525 (on GA-D525TUD)
  • From: Thanasis <thanasis@xxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Re: [PATCH] Move ams driver to macintosh
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] Move ams driver to macintosh
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Move ams driver to macintosh
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] hwmon fixes for 2.6.37
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Fintek F71869
  • From: Owl <owl@xxxxxxxx>
• Re: [PATCH] intel medfield: thermal_driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] intel medfield: thermal_driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Const buffers for SMBus/I2C block write functions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Const buffers for SMBus/I2C block write functions
  • From: Roman Fietze <roman.fietze@xxxxxxxxxxxxx>
• [PATCH] intel medfield: thermal_driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Further documentation for w83627hf module
  • From: Julian Brunner <julianbrunner@xxxxxxxxxxxxxx>
• Re: Fintek F71869
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Fintek F71869
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Fintek F71869
  • From: Owl <owl@xxxxxxxx>
• Re: Location for thermal drivers
  • From: Phil Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Location for thermal drivers
  • From: Phil Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] intel medfield: thermal_driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Location for thermal drivers
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Alexandros Diamantidis <adia@xxxxxxxxx>
• Re: IT8721F fan control?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/2] intel medfield: thermal_driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/2] intel medfield: thermal_driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: [PATCH 1/2] intel medfield: thermal_driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Alexandros Diamantidis <adia@xxxxxxxxx>
• Re: [PATCH 1/2] intel medfield: thermal_driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/2] intel_mid_thermal: clean up
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2] intel_mid_thermal: clean up
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Re: [PATCH 2/2] intel_mid_thermal: clean up
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] hwmon fixes for 2.6.37
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/2] intel_mid_thermal: clean up
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• [PATCH 2/2] intel_mid_thermal: clean up
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] intel medfield: thermal_driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: [PATCH V2] hwmon: twl4030: Driver for twl4030 madc module
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v4] hwmon: (applesmc) Introduce a register lookup table
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (applesmc) Fix checkpatch errors and value range checks
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• [PATCH v4] hwmon: (applesmc) Introduce a register lookup table
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (applesmc) Fix checkpatch errors and value range checks
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (applesmc) Fix checkpatch errors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (applesmc) Fix checkpatch errors
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH] hwmon: (applesmc) Fix checkpatch errors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (applesmc) Fix checkpatch errors
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• [PATCH] hwmon: (applesmc) Fix checkpatch errors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 11/11] hwmon: applesmc: Update copyright information
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 11/11] hwmon: applesmc: Update copyright information
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 10/11] hwmon: applesmc: Silence driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 09/11] hwmon: applesmc: Simplify feature sysfs handling (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 08/11] hwmon: applesmc: Dynamic creation of fan files (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 07/11] hwmon: applesmc: Extract all features generically (rev3)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 06/11] hwmon: applesmc: Handle new temperature format (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 05/11] hwmon: applesmc: Dynamic creation of temperature files (rev3)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev3)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• lmsensors config file for BioStar F-Force 550
  • From: no tellin <no.tellin@xxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 07/11] hwmon: applesmc: Extract all features generically (rev3)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev3)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 05/11] hwmon: applesmc: Dynamic creation of temperature files (rev3)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: i915 i2c driver problems (was: Re: hwmon/adt7470 crash on module load (2.6.37-rc1))
  • From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
• i915 i2c driver problems (was: Re: hwmon/adt7470 crash on module load (2.6.37-rc1))
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level>
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 02/11] hwmon: applesmc: Relax the severity of device init failure (rev2)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 01/11] hwmon: applesmc: Add MacBookAir3, 1(3, 2) support
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 03/11] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [29/32] drivers/hwmon/vt8231.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [28/32] drivers/hwmon/vt1211.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [27/32] drivers/hwmon/via686a.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [23/32] drivers/hwmon/sis5595.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [17/32] drivers/hwmon/lm70.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [13/32] drivers/hwmon/hwmon.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [09/32] drivers/hwmon/f71805f.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [08/32] drivers/hwmon/dme1737.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [07/32] drivers/hwmon/coretemp.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [05/32] drivers/hwmon/asb100.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [03/32] drivers/hwmon/adt7470.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [02/32] drivers/hwmon/abituguru3.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [01/32] drivers/hwmon/abituguru.c: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 11/11] hwmon: applesmc: Update copyright information
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 10/11] hwmon: applesmc: Silence driver
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 00/11] hwmon: applesmc: Dynamic configuration rewrite (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 09/11] hwmon: applesmc: Simplify feature sysfs handling (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 08/11] hwmon: applesmc: Dynamic creation of fan files (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 07/11] hwmon: applesmc: Extract all features generically (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 05/11] hwmon: applesmc: Dynamic creation of temperature files (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 01/11] hwmon: applesmc: Add MacBookAir3, 1(3, 2) support
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 06/11] hwmon: applesmc: Handle new temperature format (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 02/11] hwmon: applesmc: Relax the severity of device init failure (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 04/11] hwmon: applesmc: Introduce a register lookup table (rev2)
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 03/11] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level>
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH V2] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH V2] hwmon: twl4030: Driver for twl4030 madc module
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• [PATCH V2] hwmon: twl4030: Driver for twl4030 madc module
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• Re: [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm95241) Rewritten without using macros
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Re: [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Supermcro X7SPA-H LM_Sensors Configuration
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• [PATCH] hwmon: (gpio-fan) Fix fan_ctrl_init error path
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] hwmon: (ad7414) Return proper error code for ad7414_probe()
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (adt7470) Return proper error code for adt7470_probe()
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ad7414) Return proper error code for ad7414_probe()
  • From: Sean MacLennan <smaclennan@xxxxxxxxxxxx>
• [PATCH] hwmon: (ad7414) Return proper error code for ad7414_probe()
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Re: IT8721F fan control?
  • From: Alexandros Diamantidis <adia@xxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: IT8721F fan control?
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• [PATCH] hwmon: (adt7470) Return proper error code for adt7470_probe()
  • From: Axel Lin <axel.lin@xxxxxxxxx>
• Re: [PATCH 6/7] hwmon: (w83795) Clear intrusion alarm immediately
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 5/7] hwmon: (w83795) Read the intrusion state properly
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: (w83795) Fix fan control mode attributes
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 7/7] hwmon: (w83795) Check for BEEP pin availability
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 6/7] hwmon: (w83795) Clear intrusion alarm immediately
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 5/7] hwmon: (w83795) Read the intrusion state properly
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 4/7] hwmon: (w83795) Print the actual temperature channels as sources
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/7] hwmon: (w83795) List all usable temperature sources
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/7] hwmon: (w83795) Expose fan control method
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/7] hwmon: (w83795) Fix fan control mode attributes
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 7/7] hwmon: (w83795) Check for BEEP pin availability
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 6/7] hwmon: (w83795) Clear intrusion alarm immediately
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 5/7] hwmon: (w83795) Read the intrusion state properly
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 4/7] hwmon: (w83795) Print the actual temperature channels as sources
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 3/7] hwmon: (w83795) List all usable temperature sources
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/7] hwmon: (w83795) Expose fan control method
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/7] hwmon: (w83795) Fix fan control mode attributes
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 0/7] More w83795 driver fixes
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Davide Rizzo <elpa.rizzo@xxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• lm_sensors configuration file for the Gigabyte GA-880GM-UD2H motherboard
  • From: dmitriy <dkaliberda@xxxxxxx>
• IT8721F fan control?
  • From: Alexandros Diamantidis <adia@xxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [GIT PULL] hwmon fixes for 2.6.37
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm95241) Check validity of input values
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [PATCH] hwmon: (ltc4261) Fix error message format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 8/8] hwmon: applesmc: Update copyright information
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: pwmconfig problems/Gigabyte hiccups + fix
  • From: "M.Kiesel" <mayne@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] hwmon: applesmc: Extract all features generically
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 6/8] hwmon: applesmc: Dynamic creation of fan files
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 8/8] hwmon: applesmc: Update copyright information
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: applesmc: Handle new temperature format
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 8/8] hwmon: applesmc: Update copyright information
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 7/8] hwmon: applesmc: Simplify feature sysfs handling
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 6/8] hwmon: applesmc: Dynamic creation of fan files
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 5/8] hwmon: applesmc: Extract all features generically
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: applesmc: Handle new temperature format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 4/8] hwmon: applesmc: Handle new temperature format
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/8] hwmon: applesmc: Dynamic creation of temperature files
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• hwmon/adt7470 crash on module load (2.6.37-rc1)
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [PATCH 2/8] hwmon: applesmc: Introduce a register lookup table
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 2/8] hwmon: applesmc: Introduce a register lookup table
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: "Fred ." <eldmannen@xxxxxxxxx>
• Re: [PATCH 1/8] hwmon: applesmc: Relax the severity of device init failure
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 1/4] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/4 v2] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/4 v2] hwmon: (w83793) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/4 v2] hwmon: (w83792d) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/4 v2] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 2/4 v2] hwmon: (w83792d) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 3/4 v2] hwmon: (w83793) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Coretemp misreading?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/4] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 1/4 v2] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/4] hwmon: (w83792d) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/4] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Display 3 decimal places in raw sensors output
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Motherboard Specific Configuration - Zotac IONITX-A-U
  • From: member graysky <graysky@xxxxxxxxxxxx>
• Re: [PATCH 4/4] hwmon: Schedule the removal of the old intrusion detection interfaces
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/4] hwmon: (w83792d) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 3/4] hwmon: (w83793) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] Display 3 decimal places in raw sensors output
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: [PATCH 1/4] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 4/4] hwmon: Schedule the removal of the old intrusion detection interfaces
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 3/4] hwmon: (w83793) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/4] hwmon: (adm9240) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/4] hwmon: (w83792d) Implement the standard intrusion detection interface
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/8] hwmon: applesmc: Relax the severity of device init failure
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Compiling 3.2.0
  • From: Andrey Repin <hell-for-yahoo@xxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] Display 3 decimal places in raw sensors output
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [RFC v2] Support of chassis intrusion detection
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] Display 3 decimal places in raw sensors output
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: fix a minor error for sensors-detect
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• fix a minor error for sensors-detect
  • From: Chen Gong <gong.chen@xxxxxxxxxxxxxxx>
• pwmconfig problems/Gigabyte hiccups + fix
  • From: "M.Kiesel" <mayne@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 6/8] hwmon: applesmc: Dynamic creation of fan files
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 8/8] hwmon: applesmc: Update copyright information
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 2/8] hwmon: applesmc: Introduce a register lookup table
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 7/8] hwmon: applesmc: Simplify feature sysfs handling
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 4/8] hwmon: applesmc: Handle new temperature format
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 5/8] hwmon: applesmc: Extract all features generically
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 3/8] hwmon: applesmc: Dynamic creation of temperature files
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 1/8] hwmon: applesmc: Relax the severity of device init failure
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• [PATCH 0/8] hwmon: applesmc: Dynamic configuration rewrite
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
• Re: [PATCH 4/6] hwmon: Change mail address of Hans J. Koch
  • From: "Hans J. Koch" <hjk@xxxxxxxxxxxx>
• Re: [PATCH 4/6] hwmon: Change mail address of Hans J. Koch
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 4/6] hwmon: Change mail address of Hans J. Koch
  • From: "Hans J. Koch" <hjk@xxxxxxxxxxxx>
• [GIT PULL] hwmon updates for 2.6.37
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (w83795) Use standard attributes for chassis intrusion
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: (w83795) Use standard attributes for chassis intrusion
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: hwmon: (w83795) Exclude fan control feature by default
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: hwmon: (w83795) Exclude fan control feature by default
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: hwmon: (w83795) Exclude fan control feature by default
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Coretemp misreading?
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• hwmon: (w83795) Exclude fan control feature by default
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [patch 32/36 v2] hwmon: (w83795) Move register reads to dedicated functions
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: New/undocumented ABI attributes in w83795 driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: New/undocumented ABI attributes in w83795 driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [patch 30/36 v2] hwmon: (w83795) Make W83795_REG_PWM more efficient
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [patch 32/36 v2] hwmon: (w83795) Move register reads to dedicated functions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [patch 30/36 v2] hwmon: (w83795) Make W83795_REG_PWM more efficient
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (w83795) Add myself as co-author and maintainer
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: (w83795) More style cleanups
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (w83795) Add myself as co-author and maintainer
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (w83795) More style cleanups
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ltc4261) Add missing newline in debug message
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: (ltc4261) Add missing newline in debug message
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Karsten de Freese <karsten@xxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Karsten de Freese <karsten@xxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Karsten de Freese <karsten@xxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Philip Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: via-cputemp: can't compile it
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Re: via-cputemp: can't compile it
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Coretemp misreading?
  • From: Ed W <lists@xxxxxxxxxxxxxx>
• [GIT PULL] hwmon changes for 2.6.37
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: VIA EPIA PX10000G sensors
  • From: Harald Welte <HaraldWelte@xxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• k10temp is detected but not shown
  • From: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: <samu.p.onkalo@xxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Re: New in this mailing list
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: New in this mailing list
  • From: Andrey Repin <hell-for-yahoo@xxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: New in this mailing list
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 02/12] hwmon: lis3: regulator control
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 12/12] hwmon: lis3: Release resources is case of failure
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCHv2] hwmon: lis3: Short explanations of platform data fields
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest with IRQ line test
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 09/12] hwmon: lis3: use block read to access data registers
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit device
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 07/12] hwmon: lis3: New parameters to platform data
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 06/12] hwmon: lis3: restore axis enabled bits
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 05/12] hwmon: lis3: Power on corrections
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/12] hwmon: lis3: pm_runtime support
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/12] hwmon: lis3: Cleanup interrupt handling
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 04/12] hwmon: lis3: Update coordinates at polled device open
  • From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
• Re: New in this mailing list
  • From: Andrey Repin <hell-for-yahoo@xxxxxxxx>
• via-cputemp: can't compile it
  • From: singumal <qdmd-pu1o@xxxxxxxxxxxxxxx>
• Re: New in this mailing list
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Configuration MSI 975X Platinum (MS-7246)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: VIA EPIA PX10000G sensors
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Tyan S2466 and lm_sensors 3
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCHv2] hwmon: lis3: Short explanations of platform data fields
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: Discrepancy between reported readings from different interfaces
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Éric Piel <Eric.Piel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Discrepancy between reported readings from different interfaces
  • From: Arun Raghavan <arraghav@xxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Karsten de Freese <karsten@xxxxxxxxxxx>
• Re: [PATCH 00/12] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• New in this mailing list
  • From: "janc@xxxxxxxxxxxxxx" <janc@xxxxxxxxxxxxxx>
• Re: [PATCH 11/12] hwmon: lis3: Short explanations of platform data fields
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 09/12] hwmon: lis3: use block read to access data registers
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 07/12] hwmon: lis3: New parameters to platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 01/12] hwmon: lis3: pm_runtime support
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 02/12] hwmon: lis3: regulator control
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH/RFC] sensors-detect: Add detection of PMBus devices
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: karsten@xxxxxxxxxxx
• Re: [PATCH/RFC] sensors-detect: Add detection of PMBus devices
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 07/12] hwmon: lis3: New parameters to platform data
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 01/12] hwmon: lis3: pm_runtime support
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 00/12] lis3 accelerator feature update
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 03/12] hwmon: lis3: Cleanup interrupt handling
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: looking for help with W83795ADG
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 11/12] hwmon: lis3: Short explanations of platform data fields
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 08/12] hwmon: lis3: Adjust fuzziness for 8 bit device
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 09/12] hwmon: lis3: use block read to access data registers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 10/12] hwmon: lis3: Enhance lis3 selftest with IRQ line test
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 06/12] hwmon: lis3: restore axis enabled bits
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH v3] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• [PATCH 12/12] hwmon: lis3: Release resources is case of failure
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 04/12] hwmon: lis3: Update coordinates at polled device open
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 02/12] hwmon: lis3: regulator control
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 05/12] hwmon: lis3: Power on corrections
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• looking for help with W83795ADG
  • From: karsten@xxxxxxxxxxx
• Re: [PATCH/RFC] sensors-detect: Add detection of PMBus devices
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH/RFC] sensors-detect: Add detection of PMBus devices
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v3] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v3] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: Tyan S2466 and lm_sensors 3
  • From: "David Mathog" <mathog@xxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Move hdaps driver to platform/x86
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH] adt7411: set reserved bit
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Move hdaps driver to platform/x86
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• [PATCH] adt7411: set reserved bit
  • From: Rini <rini@xxxxxxxx>
• Re: help with module k10temp
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: help with module k10temp
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• Re: Tyan S2466 and lm_sensors 3
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• help with module k10temp
  • From: Noel David Torres Taño <envite@xxxxxxxxxxxxx>
• Re: Tyan S2466 and lm_sensors 3
  • From: "David Mathog" <mathog@xxxxxxxxxxx>
• Re: Tyan S2466 and lm_sensors 3
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jim Cromie <jim.cromie@xxxxxxxxx>
• Tyan S2466 and lm_sensors 3
  • From: "David Mathog" <mathog@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Davidlohr Bueso <dave@xxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <sguinot@xxxxxxxxx>
• [PATCH v2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <sguinot@xxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level>
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Rainer Koenig <Rainer.Koenig@xxxxxxxxxxxxxx>
• [PATCH 03/32] drivers/hwmon/adt7470.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 21/32] drivers/hwmon/pcf8591.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 25/32] drivers/hwmon/smsc47m1.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 26/32] drivers/hwmon/via-cputemp.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 13/32] drivers/hwmon/hwmon.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 17/32] drivers/hwmon/lm70.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 08/32] drivers/hwmon/dme1737.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 11/32] drivers/hwmon/hp_accel.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 12/32] drivers/hwmon/hwmon-vid.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Henrik Rydberg <rydberg@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH 32/32] drivers/hwmon/w83781d.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 10/32] drivers/hwmon/f71882fg.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 30/32] drivers/hwmon/w83627ehf.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 19/32] drivers/hwmon/pc87360.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 18/32] drivers/hwmon/lm78.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 29/32] drivers/hwmon/vt8231.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 07/32] drivers/hwmon/coretemp.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 05/32] drivers/hwmon/asb100.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 22/32] drivers/hwmon/pkgtemp.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 28/32] drivers/hwmon/vt1211.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 16/32] drivers/hwmon/lis3lv02d.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 01/32] drivers/hwmon/abituguru.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 24/32] drivers/hwmon/smsc47b397.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 27/32] drivers/hwmon/via686a.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 04/32] drivers/hwmon/applesmc.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 23/32] drivers/hwmon/sis5595.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 09/32] drivers/hwmon/f71805f.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 20/32] drivers/hwmon/pc87427.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 14/32] drivers/hwmon/ibmaem.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 02/32] drivers/hwmon/abituguru3.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 31/32] drivers/hwmon/w83627hf.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 15/32] drivers/hwmon/it87.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 06/32] drivers/hwmon/asus_atk0110.c: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 00/32] drivers/hwmon: Use pr_fmt and pr_<level>
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] lm-sensors: Fix error seen with non-sequential bus numbering
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] lm-sensors: Fix error seen with non-sequential bus numbering
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH v2] lm-sensors: Fix error seen with non-sequential bus numbering
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2] lm-sensors: Fix error seen with non-sequential bus numbering
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] lm-sensors: Fix error seen with non-sequential i2c bus numbering
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] lm-sensors: Fix error seen with non-sequential i2c bus numbering
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] lm-sensors: Fix error seen with non-sequential i2c bus numbering
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Driver for SMSC SCH5627 needed
  • From: Juerg Haefliger <juergh@xxxxxxxxx>
• Driver for SMSC SCH5627 needed
  • From: Rainer Koenig <Rainer.Koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Writing a .conf for Supermicro X8DTH-6F board
  • From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: Writing a .conf for Supermicro X8DTH-6F board
  • From: Kristleifur Daðason <kristleifur@xxxxxxxxx>
• Re: Writing a .conf for Supermicro X8DTH-6F board
  • From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
• Re: Writing a .conf for Supermicro X8DTH-6F board
  • From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Chris Moore <moore@xxxxxxx>
• Re: [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Writing a .conf for Supermicro X8DTH-6F board
  • From: Philip Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Writing a .conf for Supermicro X8DTH-6F board
  • From: Kristleifur Daðason <kristleifur@xxxxxxxxx>
• [PATCH 1/2] hwmon: add generic GPIO fan driver
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: [PATCH 4/5] hwmon: DNS323 rev C1 fan support
  • From: Simon Guinot <simon@xxxxxxxxxxxx>
• Re: f71882fg on Jetway NC92-330-LF
  • From: "Jeff Rickman" <jrickman@xxxxxxxxxxx>
• VIA EPIA PX10000G sensors
  • From: Beelzebubbie <Beelzebubbie@xxxxxxx>
• Re: [PATCH] Check for flex and bison
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] Check for flex and bison
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: f71882fg on Jetway NC92-330-LF
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• Re: f71882fg on Jetway NC92-330-LF
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: f71882fg on Jetway NC92-330-LF
  • From: Luca Tettamanti <kronos.it@xxxxxxxxx>
• [PATCH/RFC] sensors-detect: Add detection of PMBus devices
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Remove many EXPERIMENTAL flags
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Remove many EXPERIMENTAL flags
  • From: Owl <owl@xxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: Remove many EXPERIMENTAL flags
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 1/3] hwmon: (lm85) Fix ADT7468 frequency table
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (lm85) Document the ADT7468 as supported
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Remove many EXPERIMENTAL flags
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Detection of W83L771W/G in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: Remove many EXPERIMENTAL flags
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 3/3] hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/3] hwmon: (lm85) Document the ADT7468 as supported
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/3] hwmon: (lm85) Fix ADT7468 frequency table
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Detection of W83L771AWG/ASG in lm90
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: fancontrol on adt7468
  • From: Peio Popov <peio@xxxxxxxx>
• Re: fancontrol on adt7468
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Compiling 3.2.0
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 4/5] hwmon: DNS323 rev C1 fan support
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Detection of W83L771AWG/ASG in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Detection of W83L771AWG/ASG in lm90
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Detection of W83L771AWG/ASG in lm90
  • From: Jean Delvare <khali@xxxxxxxxxxxx>