Hi, any update? I have the same chip on my Intel DH57JG motherboard and I'm playing with w83627ehf driver (2.6.36). if I load it with force_id=0xa510, running sensors gives me some apparently working output:
w83667hg-isa-0680
Adapter: ISA adapter
Vcore:ÂÂÂÂÂÂ +0.93 VÂ (min =Â +0.00 V, max =Â +1.74 V)ÂÂ
in1:ÂÂÂÂÂÂÂÂ +0.77 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
AVCC:ÂÂÂÂÂÂÂ +3.41 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
+3.3V:ÂÂÂÂÂÂ +3.41 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
in4:ÂÂÂÂÂÂÂÂ +1.26 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
in5:ÂÂÂÂÂÂÂÂ +0.78 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
3VSB:ÂÂÂÂÂÂÂ +3.36 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
Vbat:ÂÂÂÂÂÂÂ +3.30 VÂ (min =Â +0.00 V, max =Â +0.00 V)ÂÂ ALARM
fan1:ÂÂÂÂÂÂÂÂÂ 0 RPMÂ (min =ÂÂÂ 0 RPM, div = 2)Â ALARM
fan2:ÂÂÂÂÂÂÂÂÂ 0 RPMÂ (min =ÂÂÂ 0 RPM, div = 2)Â ALARM
fan3:ÂÂÂÂÂÂÂÂÂ 0 RPMÂ (min =ÂÂÂ 0 RPM, div = 2)Â ALARM
fan5:ÂÂÂÂÂÂÂÂÂ 0 RPMÂ (min =ÂÂÂ 0 RPM, div = 2)Â ALARM
temp1:ÂÂÂÂÂÂ +29.0 CÂ (high =Â +0.0 C, hyst =Â +0.0 C)Â ALARMÂ sensor = diode
temp2:ÂÂÂÂÂÂ +30.5 CÂ (high = +80.0 C, hyst = +75.0 C)Â sensor = diode
temp3:ÂÂÂÂÂÂ +23.0 CÂ (high = +80.0 C, hyst = +75.0 C)Â sensor = thermistor
cpu0_vid:ÂÂ +2.050 V
Greets, Andrea
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
