On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.
The W83795G has a dedicated BEEP pin so the functionality is always
available there.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
w83795.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 51 insertions(+), 7 deletions(-)
--- a/drivers/hwmon/w83795.c 2010-11-06 22:40:03.000000000 +0100
+++ b/drivers/hwmon/w83795.c 2010-11-06 22:55:15.000000000 +0100
@@ -171,6 +171,9 @@ static const u8 IN_LSB_SHIFT_IDX[][2] =
#define W83795_REG_CLR_CHASSIS 0x4D
#define W83795_REG_BEEP(index) (0x50 + (index))
+#define W83795_REG_OVT_CFG 0x58
+#define OVT_CFG_SEL (1 << 7)
+
#define W83795_REG_FCMS1 0x201
#define W83795_REG_FCMS2 0x208
@@ -378,6 +381,7 @@ struct w83795_data {
u8 setup_pwm[3]; /* Register value */
u8 alarms[6]; /* Register value */
+ u8 enable_beep;
u8 beeps[6]; /* Register value */
char valid;
@@ -508,8 +512,11 @@ static void w83795_update_limits(struct
}
/* Read beep settings */
- for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
- data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+ data->beeps[i] =
+ w83795_read(client, W83795_REG_BEEP(i));
+ }
data->valid_limits = 1;
}
@@ -1588,7 +1595,7 @@ store_sf_setup(struct device *dev, struc
#define NOT_USED -1
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
* somewhere else in the code */
#define SENSOR_ATTR_IN(index) { \
SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
@@ -1603,6 +1610,8 @@ store_sf_setup(struct device *dev, struc
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + ((index > 14) ? 1 : 0)) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_FAN(index) { \
SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
NULL, FAN_INPUT, index - 1), \
@@ -1631,6 +1640,8 @@ store_sf_setup(struct device *dev, struc
SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_DTS(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
show_dts_mode, NULL, NOT_USED, index - 7), \
@@ -1649,6 +1660,8 @@ store_sf_setup(struct device *dev, struc
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
#define SENSOR_ATTR_TEMP(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
@@ -1802,10 +1815,6 @@ static const struct sensor_device_attrib
static const struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 46),
- SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 46),
- SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
- store_beep, BEEP_ENABLE, 47),
#ifdef CONFIG_SENSORS_W83795_FANCTRL
SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
store_fanin, FANIN_TOL, NOT_USED),
@@ -1818,6 +1827,13 @@ static const struct sensor_device_attrib
#endif
};
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+ SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 46),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 47),
+};
+
/*
* Driver interface
*/
@@ -1947,6 +1963,8 @@ static int w83795_handle_files(struct de
if (!(data->has_in & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+ if (j == 4 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_in[i][j].dev_attr);
if (err)
return err;
@@ -1957,6 +1975,8 @@ static int w83795_handle_files(struct de
if (!(data->has_fan & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+ if (j == 3 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_fan[i][j].dev_attr);
if (err)
return err;
@@ -1978,6 +1998,14 @@ static int w83795_handle_files(struct de
return err;
}
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+ err = fn(dev, &sda_beep_files[i].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
#ifdef CONFIG_SENSORS_W83795_FANCTRL
for (i = 0; i < data->has_pwm; i++) {
for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1996,6 +2024,8 @@ static int w83795_handle_files(struct de
#else
for (j = 0; j < 8; j++) {
#endif
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_temp[i][j].dev_attr);
if (err)
return err;
@@ -2007,6 +2037,8 @@ static int w83795_handle_files(struct de
if (!(data->has_dts & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+ if (j == 7 && !data->enable_beep)
+ continue;
err = fn(dev, &w83795_dts[i][j].dev_attr);
if (err)
return err;
@@ -2146,6 +2178,18 @@ static int w83795_probe(struct i2c_clien
else
data->has_pwm = 2;
+ /* Check if BEEP pin is available */
+ if (data->chip_type == w83795g) {
+ /* The W83795G has a dedicated BEEP pin */
+ data->enable_beep = 1;
+ } else {
+ /* The W83795ADG has a shared pin for OVT# and BEEP, so you
+ * can't have both */
+ tmp = w83795_read(client, W83795_REG_OVT_CFG);
+ if ((tmp & OVT_CFG_SEL) == 0)
+ data->enable_beep = 1;
+ }
+
err = w83795_handle_files(dev, device_create_file);
if (err)
goto exit_remove;
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
