hi Jean, to close the topic on jc42, using temp1_crit_hyst did the trick! thanks again - Karsten Am 26.10.2010 22:30, schrieb Jean Delvare:
There's a trick: temp1_max_hyst exists but is read-only. temp1_crit_hyst is writable, set it and the same delta will be applied to temp1_max_hyst (relative to temp1_max, obviously.) The reason is that there's only one register in the chip to store the delta, and it applied to both limits.
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
