On Tue, 2010-10-26 at 15:06 -0400, Jean Delvare wrote: > Hi Karsten, > > On Tue, 26 Oct 2010 20:46:48 +0200, Karsten de Freese wrote: > > hi Jean, > > > > Am 25.10.2010 09:30, schrieb Jean Delvare: > > > Now there is: > > > http://khali.linux-fr.org/devel/misc/jc42/ > > > > > great - this did again work immediately :-) > > > > 'sensors' now gives: > > / > > karsten:~$ sensors > > jc42-i2c-0-18 > > Adapter: SMBus PIIX4 adapter at 0b00 > > temp1: +21.5ÂC (low = +0.0ÂC, high = +0.0ÂC) ALARM > > (crit = +0.0ÂC, hyst = +0.0ÂC) ALARM > > > > jc42-i2c-0-19 > > Adapter: SMBus PIIX4 adapter at 0b00 > > temp1: +21.5ÂC (low = +0.0ÂC, high = +0.0ÂC) ALARM > > (crit = +0.0ÂC, hyst = +0.0ÂC) ALARM > > The 0 limits are a little odd. I would expect these sensor chips to get > up with sane defaults... But apparently they don't. I can't find any > mention of default values for these registers in the datasheet. > The ones I have tested all have their default limits set to 0 degrees and, as result, report alarms until the defaults are changed. Odd but true. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
