I have a GA-D525TUD mainboard, here are its specs: http://gigabyte.com/products/product-page.aspx?pid=3549#sp I have installed linux (gentoo) with lm_sensors-3.1.2 and kernel 2.6.35-gentoo-r12 Here is the log of sensors-detect: ~ # sensors-detect # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100) # System: Gigabyte Technology Co., Ltd. D525TUD This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel Atom thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... Yes Found `ITE IT8720F Super IO Sensors' Success! (address 0x290, driver `it87') Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): yes Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 FATAL: Module i2c_i801 not found. Failed to load module i2c-i801. Module i2c-dev loaded successfully. Next adapter: intel drm CRTDDC_A (i2c-0) Do you want to scan it? (YES/no/selectively): Next adapter: SMBus I801 adapter at 0500 (i2c-1) Do you want to scan it? (yes/NO/selectively): yes Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `it87': * ISA bus, address 0x290 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel Atom thermal sensor' (confidence: 9) Do you want to overwrite /etc/conf.d/lm_sensors? Enter s to specify other file name? (yes/NO/s): yes Done. You should now start the lm_sensors service to load the required kernel modules. Unloading i2c-dev... OK ~ # ...here is the file written: ~ # cat /etc/conf.d/lm_sensors # Generated by sensors-detect on Thu Nov 18 07:51:30 2010 # This file is sourced by /etc/init.d/lm_sensors and defines the modules to # be loaded/unloaded. # # The format of this file is a shell script that simply defines variables: # HWMON_MODULES for hardware monitoring driver modules, and optionally # BUS_MODULES for any required bus driver module (for example for I2C or SPI). # Load modules at startup LOADMODULES=yes # Initialize sensors at startup INITSENSORS=yes HWMON_MODULES="coretemp it87" # For compatibility reasons, modules are also listed individually as variables # MODULE_0, MODULE_1, MODULE_2, etc. # Please note that the numbers in MODULE_X must start at 0 and increase in # steps of 1. Any number that is missing will make the init script skip the # rest of the modules. Use MODULE_X_ARGS for arguments. # # You should use BUS_MODULES and HWMON_MODULES instead if possible. MODULE_0=coretemp MODULE_1=it87 ~ # Then I start lm_sensors: ~ # /etc/init.d/lm_sensors start * Loading lm_sensors modules... * Loading coretemp ... [ ok ] * Loading it87 ... [ ok ] * Initializing sensors ... [ ok ] ~ # ...and finally I run sensors: ~ # sensors coretemp-isa-0000 Adapter: ISA adapter ERROR: Can't get value of subfeature temp1_input: Can't read Core 0: +0.0°C (crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter ERROR: Can't get value of subfeature temp1_input: Can't read Core 1: +0.0°C (crit = +100.0°C) it8720-isa-0290 Adapter: ISA adapter in0: +1.10 V (min = +0.00 V, max = +4.08 V) in1: +1.52 V (min = +0.00 V, max = +4.08 V) in2: +3.33 V (min = +0.00 V, max = +4.08 V) in3: +2.98 V (min = +0.00 V, max = +4.08 V) in4: +3.12 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM in7: +2.98 V (min = +0.00 V, max = +4.08 V) Vbat: +3.22 V fan1: 3947 RPM (min = 0 RPM) fan2: 1776 RPM (min = 0 RPM) temp1: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +63.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp3: +33.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode cpu0_vid: +1.850 V ~ # Is the above ERROR normal? Is there something I can/should do/configure about it? _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
