On Sun, Oct 31, 2010 at 03:50:31AM -0400, Henrik Rydberg wrote:
> With temperature keys being determined automatically, the dmi match
> data is only used to assign features that can easily be detected from
> the smc. This patch removes the dmi match data altogether, and reduces
> the match table to the main machine models.
>
> Signed-off-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>
Hi Henrik,
again, nice cleanup. Couple of comments below.
> ---
> drivers/hwmon/applesmc.c | 236 ++++++++++++----------------------------------
> 1 files changed, 60 insertions(+), 176 deletions(-)
>
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index ec92aff..abbff0b 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -106,16 +106,6 @@ static const char* fan_speed_keys[] = {
>
> #define to_index(attr) (to_sensor_dev_attr(attr)->index)
>
> -/* Structure to be passed to DMI_MATCH function */
> -struct dmi_match_data {
> -/* Indicates whether this computer has an accelerometer. */
> - int accelerometer;
> -/* Indicates whether this computer has light sensors and keyboard backlight. */
> - int light;
> -/* Indicates which temperature sensors set to use. */
> - int temperature_set;
> -};
> -
> /* Dynamic device node attributes */
> struct applesmc_dev_attr {
> struct sensor_device_attribute sda; /* hwmon attributes */
> @@ -145,6 +135,10 @@ static struct applesmc_registers {
> unsigned int temp_count; /* number of temperature registers */
> unsigned int temp_begin; /* temperature lower index bound */
> unsigned int temp_end; /* temperature upper index bound */
> + bool has_accelerometer; /* has motion sensor */
> + bool has_left_light; /* has left light sensor */
> + bool has_right_light; /* has right light sensor */
> + bool has_key_light; /* has keyboard backlight */
Maybe has_key_backlight ? Might be a bit less confusing.
> bool init_complete; /* true when fully initialized */
> struct applesmc_entry *entry; /* key entries */
> } smcreg;
> @@ -158,12 +152,6 @@ static u8 backlight_state[2];
> static struct device *hwmon_dev;
> static struct input_polled_dev *applesmc_idev;
>
> -/* Indicates whether this computer has an accelerometer. */
> -static unsigned int applesmc_accelerometer;
> -
> -/* Indicates whether this computer has light sensors and keyboard backlight. */
> -static unsigned int applesmc_light;
> -
> /* The number of fans handled by the driver */
> static unsigned int fans_handled;
>
> @@ -431,6 +419,19 @@ static int applesmc_write_key(const char *key, const u8 *buffer, u8 len)
> return applesmc_write_entry(&entry, buffer, len);
> }
>
> +static int applesmc_has_key(const char *key, bool *value)
> +{
> + struct applesmc_entry entry;
> + int ret;
> +
> + ret = applesmc_get_entry_by_key(key, &entry);
> + if (ret && ret != -EINVAL)
> + return ret;
> +
> + *value = ret == 0 && entry.len;
> + return 0;
> +}
> +
> /*
> * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z).
> */
> @@ -467,7 +468,7 @@ static int applesmc_device_init(void)
> int total, ret = -ENXIO;
> u8 buffer[2];
>
> - if (!applesmc_accelerometer)
> + if (!smcreg.has_accelerometer)
> return 0;
>
> for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
> @@ -534,9 +535,26 @@ static int applesmc_init_smcreg_try(void)
> return ret;
> s->temp_count = s->temp_end - s->temp_begin;
>
> + ret = applesmc_has_key(LIGHT_SENSOR_LEFT_KEY, &s->has_left_light);
> + if (ret)
> + return ret;
> + ret = applesmc_has_key(LIGHT_SENSOR_RIGHT_KEY, &s->has_right_light);
> + if (ret)
> + return ret;
> + ret = applesmc_has_key(MOTION_SENSOR_KEY, &s->has_accelerometer);
> + if (ret)
> + return ret;
> + ret = applesmc_has_key(BACKLIGHT_KEY, &s->has_key_light);
> + if (ret)
> + return ret;
> +
> s->init_complete = true;
>
> - pr_info("key=%d temp=%d\n", s->key_count, s->temp_count);
> + pr_info("key=%d temp=%d acc=%d, light=%d, keyb=%d\n",
light= and keyb= are a bit confusing. Maybe at least use backlight= ?
> + s->key_count, s->temp_count,
> + s->has_accelerometer,
> + s->has_left_light + s->has_right_light,
Resulting output is 0, 1, or 3. And "1" can mean left or right.
Is this useful ?
> + s->has_key_light);
>
> return 0;
> }
> @@ -585,7 +603,7 @@ static int applesmc_probe(struct platform_device *dev)
> /* Synchronize device with memorized backlight state */
> static int applesmc_pm_resume(struct device *dev)
> {
> - if (applesmc_light)
> + if (smcreg.has_key_light)
> applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
> return 0;
> }
> @@ -1115,24 +1133,6 @@ static struct applesmc_node_group temp_group[] = {
> /* Module stuff */
>
> /*
> - * applesmc_dmi_match - found a match. return one, short-circuiting the hunt.
> - */
> -static int applesmc_dmi_match(const struct dmi_system_id *id)
> -{
> - struct dmi_match_data* dmi_data = id->driver_data;
> - pr_info("%s detected:\n", id->ident);
> - applesmc_accelerometer = dmi_data->accelerometer;
> - pr_info(" - Model %s accelerometer\n",
> - applesmc_accelerometer ? "with" : "without");
> - applesmc_light = dmi_data->light;
> - pr_info(" - Model %s light sensors and backlight\n",
> - applesmc_light ? "with" : "without");
> -
> -
> - return 1;
> -}
> -
> -/*
> * applesmc_destroy_nodes - remove files and free associated memory
> */
> static void applesmc_destroy_nodes(struct applesmc_node_group *groups)
> @@ -1247,158 +1247,39 @@ static void applesmc_release_accelerometer(void)
> sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group);
> }
>
> -static __initdata struct dmi_match_data applesmc_dmi_data[] = {
> -/* MacBook Pro: accelerometer, backlight and temperature set 0 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 0 },
> -/* MacBook2: accelerometer and temperature set 1 */
> - { .accelerometer = 1, .light = 0, .temperature_set = 1 },
> -/* MacBook: accelerometer and temperature set 2 */
> - { .accelerometer = 1, .light = 0, .temperature_set = 2 },
> -/* MacMini: temperature set 3 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 3 },
> -/* MacPro: temperature set 4 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 4 },
> -/* iMac: temperature set 5 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 5 },
> -/* MacBook3, MacBook4: accelerometer and temperature set 6 */
> - { .accelerometer = 1, .light = 0, .temperature_set = 6 },
> -/* MacBook Air: accelerometer, backlight and temperature set 7 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 7 },
> -/* MacBook Pro 4: accelerometer, backlight and temperature set 8 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 8 },
> -/* MacBook Pro 3: accelerometer, backlight and temperature set 9 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 9 },
> -/* iMac 5: light sensor only, temperature set 10 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 10 },
> -/* MacBook 5: accelerometer, backlight and temperature set 11 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 11 },
> -/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 12 },
> -/* iMac 8: light sensor only, temperature set 13 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 13 },
> -/* iMac 6: light sensor only, temperature set 14 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 14 },
> -/* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 15 },
> -/* MacPro3,1: temperature set 16 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 16 },
> -/* iMac 9,1: light sensor only, temperature set 17 */
> - { .accelerometer = 0, .light = 0, .temperature_set = 17 },
> -/* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 18 },
> -/* MacBook Pro 5,3: accelerometer, backlight and temperature set 19 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 19 },
> -/* MacBook Pro 5,4: accelerometer, backlight and temperature set 20 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 20 },
> -/* MacBook Pro 6,2: accelerometer, backlight and temperature set 21 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 21 },
> -/* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
> - { .accelerometer = 1, .light = 1, .temperature_set = 22 },
> -};
> +static int applesmc_dmi_match(const struct dmi_system_id *id)
> +{
> + pr_info("%s detected\n", id->ident);
Is this useful enough to be pr_info or just noisy ?
> + return 1;
> +}
>
> /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
> * So we need to put "Apple MacBook Pro" before "Apple MacBook". */
> static __initdata struct dmi_system_id applesmc_whitelist[] = {
> - { applesmc_dmi_match, "Apple MacBook Air 2", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir2") },
> - &applesmc_dmi_data[15]},
> { applesmc_dmi_match, "Apple MacBook Air", {
> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
> - &applesmc_dmi_data[7]},
> - { applesmc_dmi_match, "Apple MacBook Pro 7", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro7") },
> - &applesmc_dmi_data[22]},
> - { applesmc_dmi_match, "Apple MacBook Pro 5,4", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4") },
> - &applesmc_dmi_data[20]},
> - { applesmc_dmi_match, "Apple MacBook Pro 5,3", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3") },
> - &applesmc_dmi_data[19]},
> - { applesmc_dmi_match, "Apple MacBook Pro 6", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6") },
> - &applesmc_dmi_data[21]},
> - { applesmc_dmi_match, "Apple MacBook Pro 5", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
> - &applesmc_dmi_data[12]},
> - { applesmc_dmi_match, "Apple MacBook Pro 4", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") },
> - &applesmc_dmi_data[8]},
> - { applesmc_dmi_match, "Apple MacBook Pro 3", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
> - &applesmc_dmi_data[9]},
> - { applesmc_dmi_match, "Apple MacBook Pro 2,2", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
> - &applesmc_dmi_data[18]},
> + },
> { applesmc_dmi_match, "Apple MacBook Pro", {
> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
> - &applesmc_dmi_data[0]},
> - { applesmc_dmi_match, "Apple MacBook (v2)", {
> - DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
> - &applesmc_dmi_data[1]},
> - { applesmc_dmi_match, "Apple MacBook (v3)", {
> - DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
> - &applesmc_dmi_data[6]},
> - { applesmc_dmi_match, "Apple MacBook 4", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") },
> - &applesmc_dmi_data[6]},
> - { applesmc_dmi_match, "Apple MacBook 5", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") },
> - &applesmc_dmi_data[11]},
> + },
> { applesmc_dmi_match, "Apple MacBook", {
> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
> - &applesmc_dmi_data[2]},
> + },
> { applesmc_dmi_match, "Apple Macmini", {
> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") },
> - &applesmc_dmi_data[3]},
> - { applesmc_dmi_match, "Apple MacPro2", {
> - DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
> - &applesmc_dmi_data[4]},
> - { applesmc_dmi_match, "Apple MacPro3", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
> - &applesmc_dmi_data[16]},
> + },
> { applesmc_dmi_match, "Apple MacPro", {
> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
> - &applesmc_dmi_data[4]},
> - { applesmc_dmi_match, "Apple iMac 9,1", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
> - DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
> - &applesmc_dmi_data[17]},
> - { applesmc_dmi_match, "Apple iMac 8", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
> - &applesmc_dmi_data[13]},
> - { applesmc_dmi_match, "Apple iMac 6", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") },
> - &applesmc_dmi_data[14]},
> - { applesmc_dmi_match, "Apple iMac 5", {
> - DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> - DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
> - &applesmc_dmi_data[10]},
> + },
> { applesmc_dmi_match, "Apple iMac", {
> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
> - &applesmc_dmi_data[5]},
> + },
> { .ident = NULL }
> };
>
> @@ -1468,18 +1349,20 @@ static int __init applesmc_init(void)
> if (ret)
> goto out_fans;
>
> - if (applesmc_accelerometer) {
> + if (smcreg.has_accelerometer) {
> ret = applesmc_create_accelerometer();
> if (ret)
> goto out_temperature;
> }
>
> - if (applesmc_light) {
> + if (smcreg.has_left_light) {
> /* Add light sensor file */
> ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_light.attr);
> if (ret)
> goto out_accelerometer;
> + }
>
So "light" == left light sensor. How about the right light sensor ?
If (theoretically) a device as only a right light sensor, you would display
that a light sensor exists and then not create a sysfs file for it.
Maybe add a right_light sysfs attribute ? Or drop the knowledge about it entirely
since you don't use it anyway. Or merge the two into a single attribute file
(if that makes sense).
> + if (smcreg.has_key_light) {
> /* Create the workqueue */
> applesmc_led_wq = create_singlethread_workqueue("applesmc-led");
> if (!applesmc_led_wq) {
> @@ -1504,16 +1387,16 @@ static int __init applesmc_init(void)
> return 0;
>
> out_light_ledclass:
> - if (applesmc_light)
> + if (smcreg.has_key_light)
> led_classdev_unregister(&applesmc_backlight);
> out_light_wq:
> - if (applesmc_light)
> + if (smcreg.has_key_light)
> destroy_workqueue(applesmc_led_wq);
> out_light_sysfs:
> - if (applesmc_light)
> + if (smcreg.has_left_light)
> sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
> out_accelerometer:
> - if (applesmc_accelerometer)
> + if (smcreg.has_accelerometer)
> applesmc_release_accelerometer();
> out_temperature:
> applesmc_destroy_nodes(temp_group);
> @@ -1540,12 +1423,13 @@ out:
> static void __exit applesmc_exit(void)
> {
> hwmon_device_unregister(hwmon_dev);
> - if (applesmc_light) {
> + if (smcreg.has_key_light) {
> led_classdev_unregister(&applesmc_backlight);
> destroy_workqueue(applesmc_led_wq);
> - sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
> }
> - if (applesmc_accelerometer)
> + if (smcreg.has_left_light)
> + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
> + if (smcreg.has_accelerometer)
> applesmc_release_accelerometer();
> applesmc_destroy_nodes(temp_group);
> while (fans_handled)
> --
> 1.7.1
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@xxxxxxxxxxxxxx
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
