Temperature sources are not correlated directly with temperature channels. A look-up table is required to find out which temperature sources can be used depending on which temperature channels (both analog and digital) are enabled. Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> --- w83795.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 3 deletions(-) --- a/drivers/hwmon/w83795.c 2010-11-05 21:44:32.000000000 +0100 +++ b/drivers/hwmon/w83795.c 2010-11-05 22:01:58.000000000 +0100 @@ -178,6 +178,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = #define W83795_REG_TSS(index) (0x209 + (index)) +#define TSS_MAP_RESERVED 0xff +static const u8 tss_map[4][6] = { + { 0, 1, 2, 3, 4, 5}, + { 6, 7, 8, 9, 0, 1}, + {10, 11, 12, 13, 2, 3}, + { 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED}, +}; + #define PWM_OUTPUT 0 #define PWM_FREQ 1 #define PWM_START 2 @@ -930,6 +938,27 @@ show_pwm_mode(struct device *dev, struct return sprintf(buf, "%u\n", mode); } +/* + * Check whether a given temperature source can ever be useful. + * Returns the number of selectable temperature channels which are + * enabled. + */ +static int w83795_tss_useful(const struct w83795_data *data, int tsrc) +{ + int useful = 0, i; + + for (i = 0; i < 4; i++) { + if (tss_map[i][tsrc] == TSS_MAP_RESERVED) + continue; + if (tss_map[i][tsrc] < 6) /* Analog */ + useful += (data->has_temp >> tss_map[i][tsrc]) & 1; + else /* Digital */ + useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1; + } + + return useful; +} + static ssize_t show_temp_src(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1608,8 +1637,6 @@ store_sf_setup(struct device *dev, struc SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \ show_alarm_beep, store_beep, BEEP_ENABLE, \ index + (index > 4 ? 11 : 17)), \ - SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO, \ - show_temp_src, store_temp_src, NOT_USED, index - 1), \ SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \ show_temp_pwm_enable, store_temp_pwm_enable, \ TEMP_PWM_ENABLE, index - 1), \ @@ -1695,7 +1722,7 @@ static const struct sensor_device_attrib SENSOR_ATTR_FAN(14), }; -static const struct sensor_device_attribute_2 w83795_temp[][29] = { +static const struct sensor_device_attribute_2 w83795_temp[][28] = { SENSOR_ATTR_TEMP(1), SENSOR_ATTR_TEMP(2), SENSOR_ATTR_TEMP(3), @@ -1726,6 +1753,21 @@ static const struct sensor_device_attrib SENSOR_ATTR_PWM(8), }; +static const struct sensor_device_attribute_2 w83795_tss[6] = { + SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 0), + SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 1), + SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 2), + SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 3), + SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 4), + SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO, + show_temp_src, store_temp_src, NOT_USED, 5), +}; + static const struct sensor_device_attribute_2 sda_single_files[] = { SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep, store_chassis_clear, ALARM_STATUS, 46), @@ -1890,6 +1932,15 @@ static int w83795_handle_files(struct de } } + for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) { + j = w83795_tss_useful(data, i); + if (!j) + continue; + err = fn(dev, &w83795_tss[i].dev_attr); + if (err) + return err; + } + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) { err = fn(dev, &sda_single_files[i].dev_attr); if (err) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors