Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
w83795.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/drivers/hwmon/w83795.c 2010-10-29 14:00:07.000000000 +0200
+++ b/drivers/hwmon/w83795.c 2010-10-29 14:00:44.000000000 +0200
@@ -916,6 +916,21 @@ store_pwm_enable(struct device *dev, str
}
static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = to_sensor_dev_attr_2(attr)->index;
+ unsigned int mode;
+
+ if (data->pwm_fomc & (1 << index))
+ mode = 0; /* DC */
+ else
+ mode = 1; /* PWM */
+
+ return sprintf(buf, "%u\n", mode);
+}
+
+static ssize_t
show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
@@ -1551,6 +1566,8 @@ store_sf_setup(struct device *dev, struc
show_pwm, store_pwm, PWM_FREQ, index - 1), \
SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \
+ show_pwm_mode, NULL, NOT_USED, index - 1), \
SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
show_fanin, store_fanin, FANIN_TARGET, index - 1) }
@@ -1698,7 +1715,7 @@ static const struct sensor_device_attrib
SENSOR_ATTR_DTS(14),
};
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
SENSOR_ATTR_PWM(3),
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
