Hi *,
right away an additional config for another motherboard:
# dmidecode 2.9
SMBIOS 2.4 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-770TA-UD3
Version:
Serial Number:
UUID: 36434630-3439-3743-4342-4245FFFFFFFF
Wake-up Type: Power Switch
SKU Number:
Family:
The config is attached.
Here is some example output:
it8720-isa-0228
Adapter: ISA adapter
Vcore: +1.22 V (min = +0.78 V, max = +1.50 V)
Vdram: +1.52 V (min = +1.42 V, max = +1.57 V)
+3.3V: +3.33 V (min = +3.14 V, max = +3.47 V)
+5V: +5.08 V (min = +4.76 V, max = +5.24 V)
+12V: +12.05 V (min = +11.41 V, max = +12.62 V)
5VSB: +5.03 V (min = +4.76 V, max = +5.24 V)
Vbat: +3.25 V
CPU Fan: 1691 RPM (min = 1000 RPM)
SYS Temp: +50.0ÂC (low = +127.0ÂC, high = +127.0ÂC) sensor =
thermistor
CPU Casing Temp: +40.0ÂC (low = +127.0ÂC, high = +70.0ÂC) sensor =
thermal diode
Please feel free to include this config at the list of available
motherboard configurations.
Cheers,
Ancoron
chip "it8720-isa-*"
### Voltages
# in5 is mysterious.
label in0 "Vcore"
label in1 "Vdram" # "DDR3" in BIOS
label in2 "+3.3V"
label in3 "+5V" # Not in BIOS
label in4 "+12V"
ignore in5
ignore in6
label in7 "5VSB" # Not in BIOS
label in8 "Vbat" # Not in BIOS
ignore cpu0_vid
# Vcore, Vdram, +3.3V and Vbat are connected directly, so no compute
# line is needed for these. +5V and 5VSB are internal so we use the
# standard scaling factor. Scaling for +12V is apparently not standard,
# factor 3.963 is guessed from BIOS and EasyTune values (3.943 was
# another candidate.)
compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
compute in4 @ * 3.963, @ / 3.963
compute in7 @ * (6.8/10+1), @ / (6.8/10+1)
# The BIOS won't set any limit for voltages.
set in0_min 0.825 * 0.95
set in0_max 1.425 * 1.05
set in1_min 1.5 * 0.95
set in1_max 1.5 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5 * 0.95
set in3_max 5 * 1.05
set in4_min 12 * 0.95
set in4_max 12 * 1.05
set in7_min 5 * 0.95
set in7_max 5 * 1.05
### Temperatures
# The BIOS only shows 2 temperature values:
# - temp1: the system temprature
# - temp2: the CPU temperature
label temp1 "SYS Temp"
label temp2 "CPU Casing Temp"
ignore temp3
### Fans
label fan1 "CPU Fan"
ignore fan2
ignore fan3
# ignore fan4 # doesn't exist on GA-770TA-UD3
ignore fan5
# Adjust for your own fans
set fan1_min 1000
# set fan3_min 3000
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
