Hi *,
I just want to share the configuration that works nicely for the
mentioned motherboard:
# dmidecode 2.9
SMBIOS 2.4 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-790XTA-UD4
Version:
Serial Number:
UUID: 36434630-3439-3533-3433-3734FFFFFFFF
Wake-up Type: Power Switch
SKU Number:
Family:
The sensors.conf file is attached.
Here is some sample output:
it8720-isa-0228
Adapter: ISA adapter
Vcore: +1.20 V (min = +0.78 V, max = +1.50 V)
Vdram: +1.49 V (min = +1.42 V, max = +1.57 V)
+3.3V: +3.34 V (min = +3.14 V, max = +3.47 V)
+5V: +5.11 V (min = +4.76 V, max = +5.24 V)
+12V: +11.92 V (min = +11.41 V, max = +12.62 V)
5VSB: +5.08 V (min = +4.76 V, max = +5.24 V)
Vbat: +3.26 V
CPU Fan: 690 RPM (min = 300 RPM)
SYS Fan 2: 873 RPM (min = 300 RPM)
SYS Temp: +43.0ÂC (low = +0.0ÂC, high = +50.0ÂC) sensor =
thermistor
CPU Casing Temp: +27.0ÂC (low = +0.0ÂC, high = +65.0ÂC) sensor =
thermal diode
NB Temp: +37.0ÂC (low = +0.0ÂC, high = +55.0ÂC) sensor =
thermistor
Please feel free to upload this to the available configurations.
Cheers,
Ancoron
chip "it8720-isa-*"
### Voltages
# in5 is mysterious.
label in0 "Vcore"
label in1 "Vdram" # "DDR3" in BIOS
label in2 "+3.3V"
label in3 "+5V" # Not in BIOS
label in4 "+12V"
ignore in5
ignore in6
label in7 "5VSB" # Not in BIOS
label in8 "Vbat" # Not in BIOS
ignore cpu0_vid
# Vcore, Vdram, +3.3V and Vbat are connected directly, so no compute
# line is needed for these. +5V and 5VSB are internal so we use the
# standard scaling factor. Scaling for +12V is apparently not standard,
# factor 3.963 is guessed from BIOS and EasyTune values (3.943 was
# another candidate.)
compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
compute in4 @ * 3.963, @ / 3.963
compute in7 @ * (6.8/10+1), @ / (6.8/10+1)
# The BIOS won't set any limit for voltages.
set in0_min 0.825 * 0.95
set in0_max 1.425 * 1.05
set in1_min 1.5 * 0.95
set in1_max 1.5 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5 * 0.95
set in3_max 5 * 1.05
set in4_min 12 * 0.95
set in4_max 12 * 1.05
set in7_min 5 * 0.95
set in7_max 5 * 1.05
### Temperatures
# The BIOS only shows 2 temperature values, so temp1 and temp3
# might not be actually both used, and I don't know which one
# is reported by the BIOS as the system temperature.
label temp1 "SYS Temp"
set temp1_min 0
set temp1_max 50 # Tropical ambient max plus a bit
label temp2 "CPU Casing Temp"
set temp2_min 0
set temp2_max 65 # BIOS "CPU Warning Temperature" - 5
label temp3 "NB Temp"
set temp3_min 0
set temp3_max 55 # BIOS "CPU Warning Temperature" - 15
### Fans
label fan1 "CPU Fan"
ignore fan2
label fan3 "SYS Fan 2"
# ignore fan4 # doesn't exist on GA-790XTA-UD4
ignore fan5
# Adjust for your own fans
set fan1_min 300
set fan3_min 300
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
