We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.
Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
Documentation/hwmon/w83793 | 2 +-
drivers/hwmon/w83793.c | 32 +++++++++++++++++++++++++++++---
2 files changed, 30 insertions(+), 4 deletions(-)
--- linux-2.6.37-rc1.orig/Documentation/hwmon/w83793 2010-11-02 16:55:58.000000000 +0100
+++ linux-2.6.37-rc1/Documentation/hwmon/w83793 2010-11-02 17:15:32.000000000 +0100
@@ -92,7 +92,7 @@ This driver implements support for Winbo
* Chassis
If the case open alarm triggers, it will stay in this state unless cleared
- by any write to the sysfs file "chassis".
+ by writing 0 to the sysfs file "intrusion0_alarm".
* VID and VRM
The VRM version is detected automatically, don't modify the it unless you
--- linux-2.6.37-rc1.orig/drivers/hwmon/w83793.c 2010-11-02 16:55:58.000000000 +0100
+++ linux-2.6.37-rc1/drivers/hwmon/w83793.c 2010-11-02 17:16:45.000000000 +0100
@@ -421,14 +421,16 @@ store_beep_enable(struct device *dev, st
/* Write any value to clear chassis alarm */
static ssize_t
-store_chassis_clear(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
+store_chassis_clear_legacy(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83793_data *data = i2c_get_clientdata(client);
u8 val;
+ dev_warn(&client->dev, "Attribute chassis is deprecated, "
+ "use intrusion0_alarm instead\n");
mutex_lock(&data->update_lock);
val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
val |= 0x80;
@@ -437,6 +439,28 @@ store_chassis_clear(struct device *dev,
return count;
}
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 reg;
+
+ if (strict_strtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+ w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
+ data->alarms[3] &= ~(1 << 6);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
#define FAN_INPUT 0
#define FAN_MIN 1
static ssize_t
@@ -1102,6 +1126,8 @@ static DEVICE_ATTR(vrm, S_IWUSR | S_IRUG
static struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear_legacy, ALARM_STATUS, 30),
+ SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 30),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
store_beep_enable, NOT_USED, NOT_USED),
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
