I had to look it up for one user, so we might as well store it in the driver documentation. Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> --- Documentation/hwmon/w83627hf | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) --- linux-2.6.37-rc3.orig/Documentation/hwmon/w83627hf 2010-10-21 10:01:11.000000000 +0200 +++ linux-2.6.37-rc3/Documentation/hwmon/w83627hf 2010-11-29 16:24:34.000000000 +0100 @@ -91,3 +91,25 @@ isaset -y -f 0x2e 0xaa The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but 0x4e/0x4f is also possible. + +Voltage pin mapping +------------------- + +Here is a summary of the voltage pin mapping for the W83627THF. This +can be useful to convert data provided by board manufacturers into a +value libsensors configuration. + + W83627THF | + Pin | Name | Register | Sysfs attribute +----------------------------------------------------- + 100 | CPUVCORE | 20h | in0 + 99 | VIN0 | 21h | in1 + 98 | VIN1 | 22h | in2 + 97 | VIN2 | 24h | in4 + 114 | AVCC | 23h | in3 + 61 | 5VSB | 50h (bank 5) | in7 + 74 | VBAT | 51h (bank 5) | in8 + +For other supported devices, you'll have to take the hard path and +look up the information in the datasheet yourself (and then add it +to this document please.) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
