On Fri, Nov 12, 2010 at 05:38:21AM -0500, Alan Cox wrote: > On Thu, 11 Nov 2010 12:56:54 -0800 > Guenter Roeck <guenter.roeck@xxxxxxxxxxxx> wrote: > > > On Thu, 2010-11-11 at 10:49 -0500, Alan Cox wrote: > > > From: Durgadoss <durgadoss.r@xxxxxxxxx> > > > > > > This is the basic thermal sensor driver for Intel MID platform using the > > > Medfield chipset. It plugs in via the thermal drivers and provides sensor > > > readings for the device sensors. > > > > > > Signed-off-by: Durgadoss R <durgadoss.r@xxxxxxxxx> > > > Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx> > > > --- > > > > > As a thermal driver, shouldn't this driver be in drivers/thermal ? > > drivers/thermal doesn't contain any drivers at all but I have no problem > with being there or hwmon - whichever is best. So far, all thermal drivers, including the Intel Medfield driver, are in platform directories. Not sure if that is a good location either. drivers/thermal seems to be the natural place. That there are no drivers in drivers/thermal should not be a reason to move it elsewhere. One driver has to be the first, after all. hwmon just doesn't seem right, since hwmon support for thermal devices is optional. Jean, any opinion ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
