Re: Writing a .conf for Supermicro X8DTH-6F board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Certainly!

Looking at the config for the C7X58 board, the overall setup seems to be different.

2010/10/18 Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
On Mon, 18 Oct 2010, Kristleifur DaÄason wrote:
> Here's an excerpt from the specifications file:

Please send us the entire file, so that I can compare it with the one for
the C7X58 (which uses the same sensor chip).

--
Â"One disk to rule them all, One disk to find them. One disk to bring
Âthem all and in the darkness grind them. In the Land of Redmond
Âwhere the shadows lie." -- The Silicon Valley Tarot
ÂHenrique Holschuh

Bus Type = ISAIO/SMBus
One W83795AG

Windbond W83795AG, Slave Address=0x2f (0x5E in 8-Bit format)
=============================================================
Fan1 Fan Speed, Offset 0x2e		RPM = 84375/Data
Fan2 Fan Speed, Offset 0x2f		RPM = 84375/Data
Fan3 Fan Speed, Offset 0x30		RPM = 84375/Data
Fan4 Fan Speed, Offset 0x31		RPM = 84375/Data
Fan5 Fan Speed, Offset 0x32		RPM = 84375/Data
Fan6 Fan Speed, Offset 0x33		RPM = 84375/Data
Fan7 Fan Speed, Offset 0x34		RPM = 84375/Data
Fan8 Fan Speed, Offset 0x35		RPM = 84375/Data
CPU1 Voltage, Offset 0x10		Voltage = Data* 0.008
CPU2 Voltage, Offset 0x11		Voltage = Data* 0.008
CPU1 DIMM Voltage, Offset 0x13		Voltage = Data* 0.008
CPU2 DIMM Voltage, Offset 0x14		Voltage = Data* 0.008
CPU1 VTT Voltage, Offset 0x1b		Voltage = Data* 0.008
CPU2 VTT Voltage, Offset 0x12		Voltage = Data* 0.008
+1.5V Voltage, Offset 0x16		Voltage = Data* 0.008
+1.8V Voltage, Offset 0x17		Voltage = Data* 0.008
+5V Voltage, Offset 0x1f		Voltage = Data* 0.008 * (40/10)
+12V Voltage, Offset 0x20		Voltage = Data* 0.008/ (10./66.2)
+1.1V Voltage, Offset 0x15		Voltage = Data* 0.008
+3.3V Voltage, Offset 0x1c		Voltage = Data* 0.024
+3.3VSB Voltage, Offset 0x1d		Voltage = Data* 0.024
Battery Voltage, Offset 0x1e		Voltage = Data* 0.024
CPU1 Temperature, Offset 0x27		Temperature = Data
CPU2 Temperature, Offset 0x26		Temperature = Data
System Temperature, Offset 0x21		Temperature = Data
Chassis Intrusion, Bank 0, Offset 0x46, BitMask 0x40	1 = Bad, 0 = Good
			(Clear Bit: Bank 0, Offset 0x4d, BitMask 0x80)


Power Supply Failure, GP21(From W83527HG)		1 = Good, 0 = Bad
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux