Added #define pr_fmt KBUILD_MODNAME ": " fmt Converted printks to pr_<level> Coalesced any long formats Removed prefixes from formats Signed-off-by: Joe Perches <joe@xxxxxxxxxxx> --- drivers/hwmon/w83627ehf.c | 23 ++++++++++------------- 1 files changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 072c580..073eabe 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -42,6 +42,8 @@ w83667hg-b 9 5 3 3 0xb350 0xc1 0x5ca3 */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -1668,8 +1670,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, break; default: if (val != 0xffff) - pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n", - val); + pr_debug("unsupported chip ID: 0x%04x\n", val); superio_exit(sioaddr); return -ENODEV; } @@ -1680,8 +1681,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, | superio_inb(sioaddr, SIO_REG_ADDR + 1); *addr = val & IOREGION_ALIGNMENT; if (*addr == 0) { - printk(KERN_ERR DRVNAME ": Refusing to enable a Super-I/O " - "device with a base I/O port 0.\n"); + pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); superio_exit(sioaddr); return -ENODEV; } @@ -1689,13 +1689,12 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr, /* Activate logical device if needed */ val = superio_inb(sioaddr, SIO_REG_ENABLE); if (!(val & 0x01)) { - printk(KERN_WARNING DRVNAME ": Forcibly enabling Super-I/O. " - "Sensor is probably unusable.\n"); + pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); } superio_exit(sioaddr); - pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr); + pr_info("Found %s chip at %#x\n", sio_name, *addr); sio_data->sioreg = sioaddr; return 0; @@ -1729,14 +1728,14 @@ static int __init sensors_w83627ehf_init(void) if (!(pdev = platform_device_alloc(DRVNAME, address))) { err = -ENOMEM; - printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + pr_err("Device allocation failed\n"); goto exit_unregister; } err = platform_device_add_data(pdev, &sio_data, sizeof(struct w83627ehf_sio_data)); if (err) { - printk(KERN_ERR DRVNAME ": Platform data allocation failed\n"); + pr_err("Platform data allocation failed\n"); goto exit_device_put; } @@ -1752,16 +1751,14 @@ static int __init sensors_w83627ehf_init(void) err = platform_device_add_resources(pdev, &res, 1); if (err) { - printk(KERN_ERR DRVNAME ": Device resource addition failed " - "(%d)\n", err); + pr_err("Device resource addition failed (%d)\n", err); goto exit_device_put; } /* platform_device_add calls probe() */ err = platform_device_add(pdev); if (err) { - printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", - err); + pr_err("Device addition failed (%d)\n", err); goto exit_device_put; } -- 1.7.3.1.g432b3.dirty _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors