Re: k10temp is detected but not shown

[Mahmood Naderan <nt_mahmood@xxxxxxxxx>]

> Do you have several, different CPU models in your system?
Two AMD cpu (each has 8 cores) on one motherboard

 
>Why should you?
Because the lm-sensor for core-i7 (that has 8 cores) shows 8 cpu temperatures

Regards,

// Naderan *Mahmood;

---

From: Jean Delvare <khali@xxxxxxxxxxxx>
To: Mahmood Naderan <nt_mahmood@xxxxxxxxx>
Cc: lm-sensors <lm-sensors@xxxxxxxxxxxxxx>
Sent: Tue, October 26, 2010 2:29:45 PM
Subject: Re: k10temp is detected but not shown

On Tue, 26 Oct 2010 03:38:21 -0700 (PDT), Mahmood Naderan wrote:
> I compiled the k10temp driver with these commands:
> mahmood@localhost:k10temp$ sudo make all
> make[1]: Entering directory `/usr/src/linux-headers-2.6.32-25-generic'
> /usr/src/linux-headers-2.6.32-25-generic/arch/x86/Makefile:81: stack protector
> enabled but no compiler support
>  Building modules, stage 2.
>  MODPOST 1 modules
> make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-25-generic'
> mahmood@localhost:k10temp$ sudo make install
> test -d /lib/modules/2.6.32-25-generic/kernel/drivers/hwmon || mkdir
> /lib/modules/2.6.32-25-generic/kernel/drivers/hwmon
> cp k10temp.ko /lib/modules/2.6.32-25-generic/kernel/drivers/hwmon
> depmod -a -F /lib/modules/2.6.32-25-generic/build/System.map 2.6.32-25-generic
>
> I then restart the system and check the lsmod:
> mahmood@localhost:k10temp$ sudo lsmod | grep "k10temp"
> k10temp                3543  0
>
> the output of "sensors" command is:
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1:      +28.0°C  (high = +70.0°C, crit = +70.0°C) 
>
> k10temp-pci-00cb
> Adapter: PCI adapter
> temp1:      +27.0°C  (high = +70.0°C)                 
>
> k10temp-pci-00d3
> Adapter: PCI adapter
> temp1:      +26.0°C  (high = +70.0°C)                 
>
> k10temp-pci-00db
> Adapter: PCI adapter
> temp1:      +26.0°C  (high = +70.0°C, crit = +70.0°C) 

Surprising that some CPUs have the critical limit and some don't... Do
you have several, different CPU models in your system?

> Is this correct? I should see 16 temperatures.

Why should you?

--
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors