Hello, I'm trying to write an lm-sensors configuration for the mainboard "Kontron 986LCD-M/mITX", which uses the "Winbond W83627THF" sensor chip. I contacted the manufacturer to request information about how the sensors/fans/voltages are connected to the chip and how to convert the raw values to sensible information. They sent me a table listing which sensor/fan/voltage is connected to which pin on the chip, together with the used resistors and conversion formulas. They table also has a column saying on which lm-sensors output the sensor/fan/voltage should appear (inX, fanX, tempX). Unfortunately, the values that are reported don't match up (for example, +5V is supposed to appear on in2, although values near 3.26V are reported). Now, I guess it's possible that they used a different module or a different version of the same module (to drive the sensor chip) when they created the table. So I started looking for information on the "w83627hf" module that I'm running, to find out which input pins of the sensor chip are mapped to which lm-sensors outputs. Unfortunately, the documentation I found for this module (for example, the one at http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/chips/w83627hf?rev=3222 (I also checked the one of "w83781d" mentioned there)) doesn't seem to contain any information on how the sensor chip inputs translate to lm-sensor outputs. So, I'd be very thankful for any advice on where to look for information regarding this mapping from sensor chip inputs to lm-sensor outputs. Thanks in advance, Julian Brunner _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
