Linux USB Users

• Thread Index

• Re: 2.6.37-rc7: no more shutdown on DELL E6400
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [RFC] usb: Realloc xHCI structures after a hub is verified.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [patch 1/5] ehci-mxc: Enable vbus later
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [PATCH] musb_gadget: restart queue on dequeuing current request
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [patch] USB: mcs7830: return negative if auto negotiate fails
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: musb: move dma mapping operations to separate functions
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: some question about usb_control_message
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: introduce api for dma code to check compatibility with usb request
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH V2 2/2] MSP onchip root hub over current quirk.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 26/27] usb: musb: pass musb pointer to is_cppi_enabled helper
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 1/3] usb: musb: introduce api for dma code to check compatibility with usb request
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• [PATCH 3/3] usb: musb: unmap buffers if forced to use pio mode
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• [PATCH 2/3] usb: musb: move dma mapping operations to separate functions
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• Re: [PATCH v2 26/27] usb: musb: pass musb pointer to is_cppi_enabled helper
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v2 27/27] usb: musb: implement runtime is_inventra_dma/is_cppi_enabled/tusb_dma_omap
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 26/27] usb: musb: pass musb pointer to is_cppi_enabled helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 25/27] usb: musb: pass musb pointer to tusb_dma_omap helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 24/27] usb: musb: pass musb pointer to is_inventra_dma helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 23/27] usb: musb: remove CONFIG_USB_*_DMA in source code of musb core driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 22/27] usb: musb: introduce is_inventra_dma helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 21/27] usb: musb: print dma type in runtime way
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 20/27] usb: musb: remove 'ifdef CONFIG_USB_INVENTRA_DMA' for comments only
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 19/27] usb: musb: remove exit symbol to avoid using of ifdef in musb_g_rx
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 18/27] usb: musb: remove duplicated define of tusb_dma_omap
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 17/27] usb: musb: support each dma controller driver built as module
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 15/27] usb: musb: same MUSB_OFFSET/musb_ep_select for all controller
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 14/27] usb: musb: pass musb pointer into musb_ep_select & MUSB_EP_OFFSET
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 11/27] usb: musb: remove musb_in_tusb
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 10/27] usb: musb: handle tusb fifo style by runtime method
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 09/27] usb: musb: introduce flags field into musb_platform_ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 08/27] usb: musb: pass fifo_mode from hw glue driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 07/27] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 06/27] usb: musb: allow all hw glue modules built into one single image
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 05/27] usb: musb: use native read_fifo/write_fifo for each hw glue driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 04/27] usb: musb: introduce read_fifo/write_fifo callback in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 03/27] usb: musb: support to compile hw glue layer driver as module
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 02/27] usb: musb: export some symbols for glue driver access
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 01/27] usb: musb: introduce get_hw_revision callback in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v2 0/27] usb: musb: musb cleanup
  • From: tom.leiming@xxxxxxxxx
• Re: some question about usb_control_message
  • From: loody <miloody@xxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Piotr Isajew <pki@xxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Filip Aben <f.aben@xxxxxxxxxx>
• Re: [PATCH V2 2/2] MSP onchip root hub over current quirk.
  • From: Anoop P A <anoop.pa@xxxxxxxxx>
• Re: [PATCH v2 11/16] USB: ehci: add workaround for Synopsys HC bug
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] MSP onchip root hub over current quirk.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/16] USB: ehci: add workaround for Synopsys HC bug
  • From: Greg KH <gregkh@xxxxxxx>
• Problems connecting to PIC 18f14k50
  • From: Erik de Castro Lopo <erik@xxxxxxxxx>
• Re: [PATCH v2] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• [PATCH v2 13/16] USB: ohci: add bus glue for the Atheros AR71XX/AR7240 SoCs
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v2 12/16] USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR913X SoCs
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v2 11/16] USB: ehci: add workaround for Synopsys HC bug
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: some question about usb_control_message
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: otg: Make USB3319 ULPI ID generic
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Piotr Isajew <pki@xxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V2 1/2] EHCI support for on-chip PMC MSP USB controller.
  • From: Anoop P A <anoop.pa@xxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V2 2/2] MSP onchip root hub over current quirk.
  • From: "Anoop P.A" <anoop.pa@xxxxxxxxx>
• [PATCH V2 1/2] EHCI support for on-chip PMC MSP USB controller.
  • From: "Anoop P.A" <anoop.pa@xxxxxxxxx>
• [PATCH V2 0/2] EHCI support for on-chip PMC MSP USB controller
  • From: "Anoop P.A" <anoop.pa@xxxxxxxxx>
• Re: [PATCH v1 21/27] usb: musb: print dma type in runtime way
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• [PATCH v2] USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• [PATCH v2] USB: usb-storage: unusual_devs update for Cypress ATACB
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• [PATCH] USB: DL100B webmail notifier: initialize return value
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• Re: [PATCH v1 01/27] usb: musb: introduce get_hw_revision callback in glue ops
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: merez@xxxxxxxxxxxxxx
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• Re: [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 21/27] usb: musb: print dma type in runtime way
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 27/27] usb: musb: implement runtime is_inventra_dma/is_cppi_enabled/tusb_dma_omap
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Greg KH <greg@xxxxxxxxx>
• some question about usb_control_message
  • From: loody <miloody@xxxxxxxxx>
• [PATCH v3] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• Re: [PATCH v2] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• Re: [PATCH v2] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v2] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] EHCI support for on-chip PMC MSP USB controller.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v1 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Device side UASP implementation?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] EHCI support for on-chip PMC MSP USB controller.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC] usb: musb: allow dma engine to check compatibility with usb request
  • From: Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: merez@xxxxxxxxxxxxxx
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1 27/27] usb: musb: implement runtime is_inventra_dma/is_cppi_enabled/tusb_dma_omap
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v1 19/27] usb: musb: remove exit symbol to avoid using of ifdef in musb_g_rx
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 21/27] usb: musb: print dma type in runtime way
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 27/27] usb: musb: implement runtime is_inventra_dma/is_cppi_enabled/tusb_dma_omap
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 6/7] USB: misc: uss720.c: add another vendor/product ID
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: Device side UASP implementation?
  • From: Praveen Kumar Amritaluru <apraveen.kumar@xxxxxxxxx>
• Re: musb (omap3) as host fails with reconnecting devices
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2] usb: otg: Make USB3319 ULPI ID generic
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v1 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] EHCI support for on-chip PMC MSP USB controller.
  • From: Anoop P <anoop.pa@xxxxxxxxx>
• [PATCH] EHCI: ASPM quirk of ISOC on AMD Hudson
  • From: Alex He <alex.he@xxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Filip Aben <f.aben@xxxxxxxxxx>
• Re: [patch 1/5] ehci-mxc: Enable vbus later
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/7] USB: misc: uss720.c: add another vendor/product ID
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 5/7] USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 4/7] USB: gadget: Remove suspended sysfs file before freeing cdev
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 7/7] Revert "USB: gadget: Allow function access to device ID data during bind()"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 3/7] USB: core: Add input prompt and help text for USB_OTG config
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 2/7] USB: ftdi_sio: Add D.O.Tec PID
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 1/7] xhci: Fix issue with port array setup and buggy hosts.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB fixes for .37-rc6
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] adding gpmc configuration functions, west bridge related
  • From: Sutharsan R <sutharsan.ram@xxxxxxxxx>
• RE: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• [PATCH v2] usb: otg: Make USB3319 ULPI ID generic
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] usbi: otg: Make USB3319 ULPI ID generic
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Add TIOCGICOUNT functionality to pl2303 driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FTDI-SIO hang on ftdi_close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Piotr Isajew <pki@xxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Device side UASP implementation?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: merez@xxxxxxxxxxxxxx
• Re: [PATCH] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Add TIOCGICOUNT functionality to pl2303 driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v1 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 06/27] usb: musb: allow all hw glue modules built into one single image
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1 09/27] usb: musb: introduce flags field into musb_platform_ops
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v1 27/27] usb: musb: implement runtime is_inventra_dma/is_cppi_enabled/tusb_dma_omap
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 26/27] usb: musb: pass musb pointer to is_cppi_enabled helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 25/27] usb: musb: pass musb pointer to tusb_dma_omap helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 24/27] usb: musb: pass musb pointer to is_inventra_dma helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 23/27] usb: musb: remove CONFIG_USB_*_DMA in source code of musb core driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 22/27] usb: musb: introduce is_inventra_dma helper
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 21/27] usb: musb: print dma type in runtime way
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 20/27] usb: musb: remove 'ifdef CONFIG_USB_INVENTRA_DMA' for comments only
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 19/27] usb: musb: remove exit symbol to avoid using of ifdef in musb_g_rx
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 18/27] usb: musb: remove duplicated define of tusb_dma_omap
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 17/27] usb: musb: support each dma controller driver built as module
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 16/27] usb: musb: define DMA controller related flags and callbacks in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 15/27] usb: musb: same MUSB_OFFSET/musb_ep_select for all controller
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 14/27] usb: musb: pass musb pointer into musb_ep_select & MUSB_EP_OFFSET
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 13/27] usb: musb: simplify musb_ep_select&MUSB_EP_OFFSET for different hardware
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 12/27] usb: musb: same musb_readb/musb_writeb in single image to support multiple machines
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 11/27] usb: musb: remove musb_in_tusb
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 10/27] usb: musb: handle tusb fifo style by runtime method
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 09/27] usb: musb: introduce flags field into musb_platform_ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 08/27] usb: musb: pass fifo_mode from hw glue driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 03/27] usb: musb: support to compile hw glue layer driver as module
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 07/27] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 06/27] usb: musb: allow all hw glue modules built into one single image
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 04/27] usb: musb: introduce read_fifo/write_fifo callback in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 05/27] usb: musb: use native read_fifo/write_fifo for each hw glue driver
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 02/27] usb: musb: export some symbols for glue driver access
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 01/27] usb: musb: introduce get_hw_revision callback in glue ops
  • From: tom.leiming@xxxxxxxxx
• [PATCH v1 0/28] usb: musb: musb cleanup
  • From: tom.leiming@xxxxxxxxx
• [patch 5/5] mx51: fix usb clock support
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [patch 0/5] iMX51 usb fixes
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [patch 3/5] arch/arm/plat-mxc/ehci.c: fix errors/typos
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [patch 4/5] MX51: Add support for usb host 2
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [patch 1/5] ehci-mxc: Enable vbus later
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [PATCH] usb: musb: fix kernel panic during s2ram(v2)
  • From: tom.leiming@xxxxxxxxx
• Device side UASP implementation?
  • From: Praveen Kumar Amritaluru <apraveen.kumar@xxxxxxxxx>
• Re: Using USB Generic Serial Converter with devices from different vendors
  • From: Piotr Isajew <pki@xxxxxxxxx>
• Re: [PATCH] usb: musb: fix kernel panic during s2ram(v1)
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/7] xHCI: fix printk_ratelimit() usage
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 6/7] xHCI: replace dev_dbg() with xhci_dbg()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 5/7] xHCI: fix cycle bit set in giveback_first_trb()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 4/7] xHCI: remove redundant parameter in giveback_first_trb()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 2/7] xHCI: AMD Hudson PLL quirk
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 3/7] xHCI: fix queue_trb in isoc transfer
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/7] xHCI: synchronize irq in xhci_suspend()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH] usb: musb: fix kernel panic during s2ram(v1)
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 02/28] usb: musb: export some symbols for glue driver access
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Prolific PL2303 Driver LIRC problem
  • From: Sami Pihlajamäki <sami.pihlajamaki@xxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
• Re: [Bug #22562] Regression in 2.6.37-rc1 - logs spammed with "unable to enumerate USB port" - bisected to commit 3df7169e
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  • From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] Align tegra-ehci DMA transfers to 32B
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH 1/2] USB: Add driver hooks for (un)?map_urb_for_dma
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH] USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• [PATCH] USB:add helper to convert USB error codes
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] USB: usb-storage: unusual_devs update for Cypress ATACB
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Sergey Vlasov <vsu@xxxxxxxxxxx>
• [PATCH] ueagle-atm: fix PHY signal initialization race
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• [PATCH] USB: usb-storage: unusual_devs update for Cypress ATACB
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Sergey Vlasov <vsu@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Sergey Vlasov <vsu@xxxxxxxxxxx>
• Re: [PATCH 10/28] usb: musb: handle tusb fifo style by runtime method
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 02/28] usb: musb: export some symbols for glue driver access
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: FTDI-SIO hang on ftdi_close()
  • From: david.schueler@xxxxxxxxxxxxxxxxxxx
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Sergey Vlasov <vsu@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB controller on Fedora 12 on dual CPU Intel based Lap Top with singl e USB port
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Add TIOCGICOUNT functionality to pl2303 driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: USB controller on Fedora 12 on dual CPU Intel based Lap Top with singl e USB port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Transmitting payload and ATA commands simultaneously messes up connection with USB SATA bridge
  • From: Richard Schütz <r.schtz@xxxxxxxxxxx>
• Re: [PATCH UPDATED 5/6] speedtch: don't abuse struct delayed_work
  • From: Nicolas Kaiser <nikai@xxxxxxxxx>
• Re: Add TIOCGICOUNT functionality to pl2303 driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v2 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v2 1/2] USB: Add driver hooks for (un)?map_urb_for_dma
  • From: Greg KH <gregkh@xxxxxxx>
• Re: USB controller on Fedora 12 on dual CPU Intel based Lap Top with singl e USB port
  • From: Greg KH <greg@xxxxxxxxx>
• Re: speedtch: don't abuse struct delayed_work
  • From: Nicolas Kaiser <nikai@xxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• USB controller on Fedora 12 on dual CPU Intel based Lap Top with singl e USB port
  • From: "pevnev@xxxxxxxx" <pevnev@xxxxxxxx>
• [PATCH v2] Align tegra-ehci DMA transfers to 32B
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH v2 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH v2 1/2] USB: Add driver hooks for (un)?map_urb_for_dma
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: rmorell@xxxxxxxxxx
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: rmorell@xxxxxxxxxx
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: rmorell@xxxxxxxxxx
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [RFC] Align tegra-ehci DMA transfers to 32B
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [RFC] Align tegra-ehci DMA transfers to 32B
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RFC] Align tegra-ehci DMA transfers to 32B
  • From: rmorell@xxxxxxxxxx
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: rmorell@xxxxxxxxxx
• Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [RFC] Align tegra-ehci DMA transfers to 32B
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 1/2] USB: Add driver hooks for (un)?map_urb_for_dma
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• [RFC] Align tegra-ehci DMA transfers to 32B
  • From: Robert Morell <rmorell@xxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to assign a device to the companion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: How to assign a device to the companion
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: USB core PCI irq question
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH] xhci: Do not run xhci_cleanup_msix with irq disabled
  • From: "Nguyen, Dong" <Dong.Nguyen@xxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB core PCI irq question
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• USB core PCI irq question
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Do not run xhci_cleanup_msix with irq disabled
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB 3.0 Drivers
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB autosuspend and Qualcomm qsc6085
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: How to assign a device to the companion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH 2.6.36-rc3] USB: serial: handle Data Carrier Detect changes
  • From: Libor Pechacek <lpechacek@xxxxxxx>
• Re: Prolific PL2303 Driver LIRC problem
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• [patch] USB: mcs7830: return negative if auto negotiate fails
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: Scary warnings from xhci_hcd on rmmod and during shutdown/suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH next] usb: musb: fix kernel panic during s2ram
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH 5/6] speedtch: don't abuse struct delayed_work
  • From: Tejun Heo <tj@xxxxxxxxxx>
• RE: USB 3.0 Drivers
  • From: "Jean-Antoine Hours" <ja.hours@xxxxxxxxxxxx>
• USB autosuspend and Qualcomm qsc6085
  • From: Oleg Kutkov <elenbert@xxxxxxxxx>
• How to assign a device to the companion
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• RE: Scary warnings from xhci_hcd on rmmod and during shutdown/suspend/resume
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Prolific PL2303 Driver LIRC problem
  • From: Sami Pihlajamäki <sami.pihlajamaki@xxxxxxxxx>
• Doubt regarding platform_get_resource
  • From: Meena Jain <meetubansal@xxxxxxxxx>
• [PATCH] xhci: Do not run xhci_cleanup_msix with irq disabled
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] adding gpmc configuration functions, west bridge related
  • From: Sutharsan <srmt@xxxxxxxxxxx>
• Re: [PATCH] USB: g_serial: Allow to override the default VID/PID
  • From: Greg KH <greg@xxxxxxxxx>
• Scary warnings from xhci_hcd on rmmod and during shutdown/suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] speedtch: don't abuse struct delayed_work
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3 0/4] USB: gadget: updating CI13xxx driver to work with g_ether
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Sergej Pupykin <ml@xxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 1/4] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC v2 1/4] USB: core: OTG Supplement Revision 2.0 updates
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC v2 4/4] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC v2 4/4] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC v2 4/4] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC v2 4/4] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 08/28] usb: musb: pass fifo_mode from hw glue driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Andreas Mohr <andi@xxxxxxxx>
• Re: [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC v2 4/4] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC v2 3/4] USB: EHCI: Notify HCD about HNP enabled port suspend
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC v2 2/4] USB: gadget: OTG supplement revision 2.0 updates
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC v2 1/4] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC v2 0/4] USB core changes for supporting OTG on MSM SoC
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH 08/28] usb: musb: pass fifo_mode from hw glue driver
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: [ANNOUNCE] UAS uasp.c driver available on github
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] USB: gadget: Remove suspended sysfs file before freeing cdev
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH] USB: core: Add input prompt and help text for USB_OTG config
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 0/5] USB core changes for supporting OTG on MSM SoC
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 4/5] USB: EHCI: Notify HCD about HNP enabled port suspend
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 3/5] USB: gadget: OTG supplement revision 2.0 updates
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [RFC 1/5] USB: core: Add input prompt and help text for USB_OTG config
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH 08/28] usb: musb: pass fifo_mode from hw glue driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
• [RFC/PATCH v2] usb: Add streams support to epautoconf.
  • From: Maya Erez <merez@xxxxxxxxxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Andreas Mohr <andi@xxxxxxxx>
• Re: [PATCH 08/28] usb: musb: pass fifo_mode from hw glue driver
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• RE: Re: [RFC] usb,serial: Make ZTE modem work again
  • From: zhao.ming9@xxxxxxxxxx
• RE: Re: [RFC] usb,serial: Make ZTE modem work again
  • From: zhao.ming9@xxxxxxxxxx
• [PATCH v4] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] west bridge device driver changes to use gpmc configuration functions
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Iomega Ego USB3.0 2TB drive - error on "remove safely"
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• [PATCH] west bridge device driver changes to use gpmc configuration functions
  • From: Sutharsan <srmt@xxxxxxxxxxx>
• Re: [PATCH V6 00/10] Add-Synopsys-DesignWare-HS-USB-OTG-driver
  • From: Tirumala Marri <tmarri@xxxxxxx>
• Re: Iomega Ego USB3.0 2TB drive - error on "remove safely"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 1/5] USB: core: Add input prompt and help text for USB_OTG config
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 0/5] USB core changes for supporting OTG on MSM SoC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] uas: Fix up the Sense IU
  • From: matthew@xxxxxx
• [PATCH 2/5] uas: Use kzalloc instead of kmalloc
  • From: matthew@xxxxxx
• [PATCH 5/5] uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  • From: matthew@xxxxxx
• [PATCH 4/5] uas: Ensure we only bind to a UAS interface
  • From: matthew@xxxxxx
• [PATCH 3/5] uas: Rename sense pipe and sense urb to status pipe and status urb
  • From: matthew@xxxxxx
• [PATCH 0/5] UAS updates
  • From: Matthew Wilcox <matthew@xxxxxx>
• Re: [PATCH 3/3] usb: gadget: g_ncm added
  • From: Greg KH <gregkh@xxxxxxx>
• Iomega Ego USB3.0 2TB drive - error on "remove safely"
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Auto-Remounting of USB3.0 drive with multiple filesystems on it [was "The dmesg files requested"]
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: The dmesg files requested
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Herton Ronaldo Krzesinski <herton@xxxxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Sergej Pupykin <ml@xxxxxxxxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: The dmesg files requested
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC] xHCI: synchronize interrupts in xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: pkondeti@xxxxxxxxxxxxxx
• Re: [PATCH 1/2] MSM: Add USB suport for QSD8x50
  • From: Daniel Walker <dwalker@xxxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Herton Ronaldo Krzesinski <herton@xxxxxxxxxxxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Herton Ronaldo Krzesinski <herton@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/28] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Percy Zahl <pzahl@xxxxxxx>
• Re: [PATCH v3] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] usb: gadget: f_ncm.c added
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 1/5] USB: core: Add input prompt and help text for USB_OTG config
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 07/28] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC 4/5] USB: EHCI: Notify HCD about HNP enabled port suspend
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 3/5] USB: gadget: OTG supplement revision 2.0 updates
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v3] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 07/28] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [RFC 4/5] USB: EHCI: Notify HCD about HNP enabled port suspend
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC 5/5] USB: Eliminate delays involved in root hub initialization during HNP
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC 3/5] USB: gadget: OTG supplement revision 2.0 updates
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC 1/5] USB: core: Add input prompt and help text for USB_OTG config
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC 0/5] USB core changes for supporting OTG on MSM SoC
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [RFC 2/5] USB: core: OTG Supplement Revision 2.0 updates
  • From: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
• RE: [PATCH 3/3] usb: gadget: g_ncm added
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• Re: [PATCH V6 00/10] Add-Synopsys-DesignWare-HS-USB-OTG-driver
  • From: Neil Jones <neiljay@xxxxxxxxx>
• RE: [RFC] xHCI: synchronize interrupts in xhci_suspend()
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 3/4] USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH] USB: g_serial: Allow to override the default VID/PID
  • From: Jef Driesen <jefdriesen@xxxxxxxxxx>
• [PATCH v3 0/4] USB: gadget: updating CI13xxx driver to work with g_ether
  • From: Artem Leonenko <tikkeri@xxxxxxxxx>
• [PATCH v3 4/4] USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096
  • From: Artem Leonenko <tikkeri@xxxxxxxxx>
• [PATCH v3 3/4] USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
  • From: Artem Leonenko <tikkeri@xxxxxxxxx>
• [PATCH v3 1/4] USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers
  • From: Artem Leonenko <tikkeri@xxxxxxxxx>
• [PATCH v3 2/4] USB: gadget: update ci13xxx to work with g_ether
  • From: Artem Leonenko <tikkeri@xxxxxxxxx>
• RE: The dmesg files requested
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Percy Zahl <pzahl@xxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v2 04/25] ehci: Support for Intel Moorestown MPH and OTG host
  • From: "Wu, Hao" <hao.wu@xxxxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Percy Zahl <pzahl@xxxxxxx>
• Re: [RFC] xhci: Resume bus on any port status change.
  • From: "Jon 'maddog' Hall" <maddog@xxxxxx>
• [PATCH v2] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2] USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [RFC] usb,serial: Make ZTE modem work again
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: [RFC] usb,serial: Make ZTE modem work again
  • From: zhao.ming9@xxxxxxxxxx
• usbutils 001 release
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/2] usbutils: Make lsusb -t show USB 3.0 devices.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2 v2] usbutils: Fix compile error on Ubuntu 9.04.
  • From: Greg KH <greg@xxxxxxxxx>
• [RFC] xhci: Resume bus on any port status change.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC] xHCI: synchronize interrupts in xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: The dmesg files requested
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: The dmesg files requested
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [RFC] usb,serial: Make ZTE modem work again
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [GIT PULL] MUSB patches
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Ben Gamari <bgamari@xxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Philippe Rétornaz <philippe.retornaz@xxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Sergej Pupykin <ml@xxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Sergej Pupykin <ml@xxxxxxxxxxxx>
• [PATCH v2] USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Sergej Pupykin <ml@xxxxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH] AT91: usb gadget: fix freeing irq in _udc_remove()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2 04/25] ehci: Support for Intel Moorestown MPH and OTG host
  • From: Greg KH <greg@xxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: How can I limit full speed transfer to 64 bytes per ms?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB-2.0 unplug of "SignalRanger MK2/SoftdB" crashes AMD based Linux systems
  • From: Percy Zahl <pzahl@xxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: (With line breaks hopefully) Reading/Writing to our USB Devices connected through 7-Port USB Hub causes System crash
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: The dmesg files requested
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] AT91: usb gadget: fix freeing irq in _udc_remove()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: ulpi_check_integrity returning error
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] musb_core: fix IRQ check
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] MUSB: fix compilation of AM35x/DA8xx glue layers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] MUSB: fix compilation of AM35x/DA8xx glue layers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 07/28] usb: musb: use platform_driver_register to register musb_hdrc driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb_core: fix IRQ check
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/25] usb: otg: add unified otg_notify function for usb_otg_event notification
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/25] usb: otg: add unified otg_notify function for usb_otg_event notification
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 01/25] usb: otg: add unified otg_notify function for usb_otg_event notification
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxx>
• Re: [PATCH] [USB] UASP: USB Attached SCSI (UAS) protocol driver
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: [PATCH] [USB] UAS: Achitecture; TMF; more
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Reading/Writing to our USB Devices connected through 7-Port USB Hub causes System crash
  • From: Jeremy Roberson <jeremy.roberson@xxxxxxxxxxxxxxxx>
• (With line breaks hopefully) Reading/Writing to our USB Devices connected through 7-Port USB Hub causes System crash
  • From: Jeremy Roberson <jeremy.roberson@xxxxxxxxxxxxxxxx>
• Re: Query regarding pci_register_driver vs platform_driver_register
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH v2 04/25] ehci: Support for Intel Moorestown MPH and OTG host
  • From: "Wu, Hao" <hao.wu@xxxxxxxxx>