Re: [RFC] Align tegra-ehci DMA transfers to 32B

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 17, 2010 at 02:32:27PM -0800, Greg KH wrote:
> On Fri, Dec 17, 2010 at 01:58:47PM -0800, Robert Morell wrote:
> > This small set of patches fixes an issue where DMA from the tegra EHCI
> > controller could be corrupted.  It was most commonly seen with USB network
> > adapters, though in theory it could happen with any USB traffic.
> > 
> > (Note: An attempt was made to fix this with commit 367c3aab, which set
> > NET_IP_ALIGN to 0 and NET_SKB_PAD to 32.  Unfortunately, not all network
> > drivers honor them (presumably since these are intended as optimizations rather
> > than hard rules).  This does mean that properly-written network drivers should
> > fall through this code with very little overhead, however.)
> 
> We don't have many USB network drivers, why not just fix them up to
> handle this properly, then you will not need to change any core USB
> code, right?

The USB core code is used by devices other than USB adapters.  We've
only seen this problem so far with usbnet devices, but I can't test
every USB device ever to make sure that they always align their DMA to
32 bytes.

Thanks,
Robert

> thanks,
> 
> greg k-h
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux