There is one nasty scenario when CI13xxx driver fails: a) two or more rx requests are queued (g_ether does that) b) rx request completed, interrupt fires and ci13xxx dequeues rq c) request complete() callback gets called and in turn it calls ep_queue() c1) in ep_queue() request gets added to the TAIL of the rx queue list d) ep gets primed with rq from (b) e) interrupt fires f) request gets popped from queue head for hw dequeue G) requets from queue head wasn't enqueued g1) isr_tr_complete_low() doesn't enqueue more requests and it doesn't prime EP, rx traffic stalls Solution: a) enque queued requests ASAP, i.e. before calling complete() callback. b) don't HW enqueue and prime endpoint with recently added request and use the oldest request in the queue. Fixed issues: a) ep_queue() may return an error code despite request was successfully added to the queue (if _hardware_enqueue() fails) b) Added requests are always processed in LIFO order, even if they are added in complete() callback c) Finally more than two and more queued requests are processed consistently, even if they were added in complete() callback The fix was successfully tested on MIPS based SoC with 4KEc CPU core and CI13612 USB core. Board successfully boots with NFS root using g_ether on ci13xxx udc. Signed-off-by: Artem Leonenko <tikkeri@xxxxxxxxx> --- drivers/usb/gadget/ci13xxx_udc.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 03505cb..f20e861 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -1794,18 +1794,20 @@ __acquires(mEp->lock) dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); + if (!list_empty(&mEp->qh[mEp->dir].queue)) { + struct ci13xxx_req* mReqEnq; + + mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next, + struct ci13xxx_req, queue); + _hardware_enqueue(mEp, mReqEnq); + } + if (!mReq->req.no_interrupt && mReq->req.complete != NULL) { spin_unlock(mEp->lock); mReq->req.complete(&mEp->ep, &mReq->req); spin_lock(mEp->lock); } - if (!list_empty(&mEp->qh[mEp->dir].queue)) { - mReq = list_entry(mEp->qh[mEp->dir].queue.next, - struct ci13xxx_req, queue); - _hardware_enqueue(mEp, mReq); - } - done: return retval; } @@ -2170,8 +2172,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, mReq->req.actual = 0; list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue); - retval = _hardware_enqueue(mEp, mReq); - if (retval == -EALREADY || retval == -EBUSY) { + if (list_is_singular(&mEp->qh[mEp->dir].queue)) + retval = _hardware_enqueue(mEp, mReq); + + if (retval == -EALREADY) { dbg_event(_usb_addr(mEp), "QUEUE", retval); retval = 0; } -- 1.7.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html