Linux RAID Storage Date Index

Thread Index

Re: Roadmap for md/raid ???
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: Performance question
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Raid6 write performance
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Raid6 write performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Roadmap for md/raid ???
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Raid6 write performance
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Raid6 write performance
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Raid6 write performance
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Raid6 write performance
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: Raid6 write performance
- From: NiftyFedora Mitch <niftyfedora@xxxxxxxxxxxx>
Re: Raid6 write performance
- From: thomas62186218@xxxxxxx
Raid6 write performance
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Michal Soltys <soltys@xxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Neil Brown <neilb@xxxxxxx>
Re: Roadmap for md/raid ???
- From: Neil Brown <neilb@xxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: thomas62186218@xxxxxxx
Re: Roadmap for md/raid ???
- From: Neil Brown <neilb@xxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
Re: [RFC PATCH 0/2] a couple of readonly handling fixups
- From: Neil Brown <neilb@xxxxxxx>
Re: mdadm bug - inconsistent output in -D mode
- From: "Michał Przyłuski" <mikylie@xxxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Ingo Molnar <mingo@xxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Kyle McMartin <kyle@xxxxxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Kyle McMartin <kyle@xxxxxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
Faulty Seagate drives
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: "H. Peter Anvin" <hpa@xxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
Re: Performance question
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: Jan Engelhardt <jengelh@xxxxxxxxxx>
Re: [GIT PULL -tip] fix 33 make headers_check warnings
- From: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
Re: raid5 with 2 disks not working correctly. Need help!
- From: "Roy Lim" <cableroy@xxxxxxxxx>
[GIT PULL -tip] fix 33 make headers_check warnings
- From: Jaswinder Singh Rajput <jaswinder@xxxxxxxxxx>
The linux-pci mailing list has been moved
- From: Martin Mares <mj+gone@xxxxxx>
Re: RAID 5 Recovery Help Needed
- From: Mike Berger <lists@xxxxxxxxxx>
Re: Performance question
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Performance question
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: Performance question
- From: "David Lethe" <david@xxxxxxxxxxxx>
Performance question
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: RAID 6 recovery (it's not looking good) *Even More problems*
- From: "Sujit Karataparambil" <sjt.kar@xxxxxxxxx>
Re: RAID 6 recovery (it's not looking good) *Even More problems*
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: RAID 6 recovery (it's not looking good) *Even More problems*
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re[4]: [PATCH 03/11][v3] async_tx: add support for asynchronous RAID6 recovery operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[4]: [PATCH 02/11][v3] async_tx: add support for asynchronous GF multiplication
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: RAID 5 Recovery Help Needed
- From: Mike Berger <lists@xxxxxxxxxx>
Re: RAID 5 Recovery Help Needed
- From: Joe Landman <landman@xxxxxxxxxxxxxxxxxxxxxxx>
RAID 5 Recovery Help Needed
- From: Mike Berger <lists@xxxxxxxxxx>
Re: Re[2]: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Re[2]: [PATCH 03/11][v3] async_tx: add support for asynchronous RAID6 recovery operations
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Re[2]: [PATCH 02/11][v3] async_tx: add support for asynchronous GF multiplication
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: mdadm man page update proposed
- From: David Greaves <david@xxxxxxxxxxxx>
Re: mdadm man page update proposed
- From: "Attila Nagy" <nagy.attila.gabor@xxxxxxxxx>
Re: mdadm man page update proposed
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re[2]: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[2]: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[2]: [PATCH 11/11][v2] ppc440spe-adma: ADMA driver for PPC440SP(e) systems
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[2]: [PATCH 03/11][v3] async_tx: add support for asynchronous RAID6 recovery operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
RE: mdadm man page update proposed
- From: "Henry, Andrew" <andrew.henry@xxxxxxxxxx>
Re[2]: [PATCH 02/11][v3] async_tx: add support for asynchronous GF multiplication
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
mdadm man page update proposed
- From: "Attila Nagy" <nagy.attila.gabor@xxxxxxxxx>
Re[2]: [RFC PATCH 00/11][v3] md: support for asynchronous execution of RAID6 operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[2]: [PATCH 11/11][v2] ppc440spe-adma: ADMA driver for PPC440SP(e) systems
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: Interesting article
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Cheng Renquan <crquan@xxxxxxxxx>
Re: Interesting article
- From: David Greaves <david@xxxxxxxxxxxx>
Re: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Interesting article
- From: Michal Soltys <soltys@xxxxxxxx>
Re: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Re: Raid 1, new disk can't be added after replacing faulty disk
- From: rcoverby@xxxxxxxxx
raid6 recovery
- From: "Jason Weber" <baboon.imonk@xxxxxxxxx>
Re: RAID5 recoverability - Was: Interesting article
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
mdadm bug - inconsistent output in -D mode
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: RAID 6 recovery (it's not looking good) *More problems*
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: Interesting article
- From: David Greaves <david@xxxxxxxxxxxx>
Re: Interesting article
- From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
Re: [PATCH 11/11][v2] ppc440spe-adma: ADMA driver for PPC440SP(e) systems
- From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
Re: [PATCH 03/11][v3] async_tx: add support for asynchronous RAID6 recovery operations
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
RE: Interesting article
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
Re: [PATCH 02/11][v3] async_tx: add support for asynchronous GF multiplication
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: differnet UUIDs and no of spares :(
- From: Eamonn Hamilton <eamonn@xxxxxxxxxxx>
Re: Interesting article
- From: "Chris Worley" <worleys@xxxxxxxxx>
Re: differnet UUIDs and no of spares :(
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: southbridge/sata controller performance?
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Read errors and SMART tests
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Roadmap for md/raid ???
- From: Bill Davidsen <davidsen@xxxxxxx>
Interesting article
- From: Maurice Hilarius <maurice@xxxxxxxxxxxx>
Re: raid5 with 2 disks not working correctly. Need help!
- From: "Roy Lim" <cableroy@xxxxxxxxx>
Re: [RFC PATCH 00/11][v3] md: support for asynchronous execution of RAID6 operations
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
differnet UUIDs and no of spares :(
- From: Eamonn Hamilton <eamonn@xxxxxxxxxxx>
Re: trouble adding spare
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: trouble adding spare
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
trouble adding spare
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Lost raid superblocks during raid 5 reshape
- From: "Bo Sheffield" <bo.sheffield@xxxxxxxxx>
Re: Reshape speed
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Reshape speed
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: Strange array state
- From: Wolfgang Denk <wd@xxxxxxx>
First post
- From: Jon Hardcastle <jd_hardcastle@xxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: upgrade advice
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Alex Samad Re: RAID5 (mdadm) array hosed after grow operation
- From: whollygoat@xxxxxxxxxxxxxxx
Re: upgrade advice
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 11/11][v2] ppc440spe-adma: ADMA driver for PPC440SP(e) systems
- From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
[PATCH 08/11][v2] md: asynchronous handle_parity_check6
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 04/11][v3] md: run RAID-6 stripe operations outside the lock
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 03/11][v3] async_tx: add support for asynchronous RAID6 recovery operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 02/11][v3] async_tx: add support for asynchronous GF multiplication
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[RFC PATCH 00/11][v3] md: support for asynchronous execution of RAID6 operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: Strange array state
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: opensuse 11.1: after growing a raid1 by one disk, no md1 on boot
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: dmaengine: fix dependency chaining
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
dmaengine: fix dependency chaining
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Strange array state
- From: Wolfgang Denk <wd@xxxxxxx>
Re: howto and faq
- From: David Greaves <david@xxxxxxxxxxxx>
Re: howto and faq
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: Kernel doesn't find root from new style partitionable array
- From: Michal Soltys <soltys@xxxxxxxx>
md: constify VFTs
- From: Jan Engelhardt <jengelh@xxxxxxxxxx>
Re: [Benchmarks] How do I set the memory invalidate bit for a 3ware 9550SXU-12 controller?
- From: Nifty Fedora Mitch <niftyfedora@xxxxxxxxxxxx>
opensuse 11.1: after growing a raid1 by one disk, no md1 on boot
- From: Bernd Rieke <bernd@xxxxxx>
Re: Roadmap for md/raid ???
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: howto and faq
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Kernel doesn't find root from new style partitionable array
- From: Mika Tiainen <mikat@xxxxxx>
Re: Alex Samad Re: RAID5 (mdadm) array hosed after grow operation
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Alex Samad Re: RAID5 (mdadm) array hosed after grow operation
- From: whollygoat@xxxxxxxxxxxxxxx
Re: [Benchmarks] How do I set the memory invalidate bit for a 3ware 9550SXU-12 controller?
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: [Benchmarks] How do I set the memory invalidate bit for a 3ware 9550SXU-12 controller?
- From: "adam radford" <aradford@xxxxxxxxx>
[PULL request] md update for 2.6.29 (includes change to fs/block.c)
- From: Neil Brown <neilb@xxxxxxx>
RE: [Benchmarks] How do I set the memory invalidate bit for a 3ware 9550SXU-12 controller?
- From: "David Lethe" <david@xxxxxxxxxxxx>
[Benchmarks] How do I set the memory invalidate bit for a 3ware 9550SXU-12 controller?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
[PATCH 2/2] Revert "Restore force switch of md array to readonly at reboot time."
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[PATCH 1/2] md: set mddev readonly flag on blkdev BLKROSET ioctl
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
[RFC PATCH 0/2] a couple of readonly handling fixups
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: RAID5 (mdadm) array hosed after grow operation
- From: whollygoat@xxxxxxxxxxxxxxx
RE: failed raid5 after ide cable malfunction.
- From: "stephan sperber" <quinte17@xxxxxx>
Re: failed raid5 after ide cable malfunction.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
failed raid5 after ide cable malfunction.
- From: "stephan sperber" <quinte17@xxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Tejun Heo <tj@xxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Neil Brown <neilb@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Neil Brown <neilb@xxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: RAID5 (mdadm) array hosed after grow operation
- From: whollygoat@xxxxxxxxxxxxxxx
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Are there some alignment settings when creating filesystem on RAID5 array which can improve performance?
- From: Michal Soltys <soltys@xxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: RAID5 (mdadm) array hosed after grow operation
- From: Neil Brown <neilb@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Neil Brown <neilb@xxxxxxx>
Re: southbridge/sata controller performance?
- From: Keld J?rn Simonsen <keld@xxxxxxxx>
Re: southbridge/sata controller performance?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: RAID5 (mdadm) array hosed after grow operation
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Are there some alignment settings when creating filesystem on RAID5 array which can improve performance?
- From: "hank peng" <pengxihan@xxxxxxxxx>
Re: raid5 with 2 disks not working correctly. Need help!
- From: Neil Brown <neilb@xxxxxxx>
Re: raid5 with 2 disks not working correctly. Need help!
- From: "Roy Lim" <cableroy@xxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: southbridge/sata controller performance?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "NeilBrown" <neilb@xxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
RE: Are there some alignment settings when creating filesystem on RAID5 array which can improve performance?
- From: "David Lethe" <david@xxxxxxxxxxxx>
Are there some alignment settings when creating filesystem on RAID5 array which can improve performance?
- From: "hank peng" <pengxihan@xxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Linux RAID partitions go missing from /dev, but fdisk can see them
- From: "Adrian Wilford" <awilford@xxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Fwd: Raid 5 --grow to fewer, larger drives
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: southbridge/sata controller performance?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
[PATCH] MD data integrity support
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Fwd: Raid 5 --grow to fewer, larger drives
- From: "Jeff Rippy" <jrippy@xxxxxxxxx>
Re: Fwd: Raid 5 --grow to fewer, larger drives
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Raid 5 --grow to fewer, larger drives
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Fwd: Raid 5 --grow to fewer, larger drives
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Fwd: Raid 5 --grow to fewer, larger drives
- From: "Jeff Rippy" <jrippy@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: "James Youngman" <jay@xxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: southbridge/sata controller performance?
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
southbridge/sata controller performance?
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Robert Hancock <hancockr@xxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
RE: Need urgent help in fixing raid5 array
- From: "Guy Watkins" <linux-raid@xxxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Twigathy <twigathy@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: Sitsofe Wheeler <sitsofe@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip (corrected email address)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Corrupt data - RAID sata_sil 3114 chip
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Disk vibration video from Sun Microsystems ( .. and the effect on performance .. )
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: 2.6.28: md0: unknown partition table
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Mark Lord <liml@xxxxxx>
fsldma fails on latest async/next
- From: "Suresh Vishnu" <Vishnu@xxxxxxxxxxxxx>
Re: mismatch_cnt, random bitflips, silent corruption(?), mdadm/sw raid[156]
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Kyle McMartin <kyle@xxxxxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Janek Kozicki <janek_listy@xxxxx>
RE: Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Janek Kozicki <janek_listy@xxxxx>
Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Robert Hancock <hancockr@xxxxxxx>
Re: 2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Michal Soltys <soltys@xxxxxxxx>
Re: mismatch_cnt, random bitflips, silent corruption(?), mdadm/sw raid[156]
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: Mark Lord <liml@xxxxxx>
2.6.27.10: ata1.00: HPA detected: current 293044655, native 293046768
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
2.6.28: md0: unknown partition table
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Raid 5 Recovery
- From: "Erik Boettcher" <tehfoo@xxxxxxxxx>
Re: Raid 5 Recovery
- From: "Erik Boettcher" <tehfoo@xxxxxxxxx>
Re: mdadm cannot open devices
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: Sitsofe Wheeler <sitsofe@xxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: Mark Lord <liml@xxxxxx>
Re: Raid 5 Recovery
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: mdadm cannot open devices
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Raid 5 Recovery
- From: "NeilBrown" <neilb@xxxxxxx>
Re: Raid 5 Recovery
- From: Shane W <shane-kernel@xxxxxx>
Re: Raid 5 Recovery
- From: "Erik Boettcher" <tehfoo@xxxxxxxxx>
Re: Raid 5 Recovery
- From: "Erik Boettcher" <tehfoo@xxxxxxxxx>
Re: Raid 5 Recovery
- From: "Dylan Distasio" <interzone@xxxxxxxxx>
Re: Raid 5 Recovery
- From: Redeeman <redeeman@xxxxxxxxxxx>
Raid 5 Recovery
- From: "Erik Boettcher" <tehfoo@xxxxxxxxx>
mdadm cannot open devices
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: "Josef 'Jeff' Sipek" <jeffpc@xxxxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: "Josef 'Jeff' Sipek" <jeffpc@xxxxxxxxxxxxxx>
RE: Re: RFC: detection of silent corruption via ATA long sector reads
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: RFC: detection of silent corruption via ATA long sector reads
- From: Robert Hancock <hancockr@xxxxxxx>
RFC: detection of silent corruption via ATA long sector reads
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
RE: mismatch_cnt, random bitflips, silent corruption(?), mdadm/sw raid[156]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: mismatch_cnt, random bitflips, silent corruption(?), mdadm/sw raid[156]
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Michal Soltys <soltys@xxxxxxxx>
Re: How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
mismatch_cnt, random bitflips, silent corruption(?), mdadm/sw raid[156]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
How do I tell if my partition is aligned for a 64k/RAID-6?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: WD GreenPower & Load_Cycle_Count
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: WD GreenPower & Load_Cycle_Count
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Re: Growing RAID1 array with bitmaps enabled
- From: Neil Brown <neilb@xxxxxxx>
Re: WD GreenPower & Load_Cycle_Count
- From: "David Rees" <drees76@xxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Eric Sandeen <sandeen@xxxxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: WD GreenPower & Load_Cycle_Count
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
WD GreenPower & Load_Cycle_Count
- From: Matt Garman <matthew.garman@xxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
2.6.27.10: cannot mount xfs filesystem partition (12TiB) after reboot
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Spread Spectrum (SSC) Enable or Disable?
- From: Matti Aarnio <matti.aarnio@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "NeilBrown" <neilb@xxxxxxx>
RE: Spread Spectrum (SSC) Enable or Disable?
- From: "David Lethe" <david@xxxxxxxxxxxx>
RE: Spread Spectrum (SSC) Enable or Disable?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: Spread Spectrum (SSC) Enable or Disable?
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Spread Spectrum (SSC) Enable or Disable?
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: "Leon Woestenberg" <leonw@xxxxxxxxxxx>
Re: md looping on recovery of raid1 array
- From: Bin Guo <bguo@xxxxxxxxxxxxxxxxxxx>
md raid not starting
- From: Richard Scobie <richard@xxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: pg_mh@xxxxxxxxxx (Peter Grandi)
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: pg_xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Read errors and SMART tests
- From: David Greaves <david@xxxxxxxxxxxx>
Re: can you help explain some --examine output to me?
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Read errors and SMART tests
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
RE: Read errors and SMART tests
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Read errors and SMART tests
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Brad Campbell <brad@xxxxxxxxxxx>
RE: Read errors and SMART tests
- From: "David Lethe" <david@xxxxxxxxxxxx>
Read errors and SMART tests
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: can you help explain some --examine output to me?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: can you help explain some --examine output to me?
- From: "NeilBrown" <neilb@xxxxxxx>
can you help explain some --examine output to me?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Wolfgang Denk <wd@xxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Wolfgang Denk <wd@xxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: Supermicro AOC-SAT2-MV8
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Supermicro AOC-SAT2-MV8
- From: Max Waterman <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: MD: Feature Request: Estimate of blocks necessary to complete sync
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: Roadmap for md/raid ???
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Roadmap for md/raid ???
- From: "Chris Worley" <worleys@xxxxxxxxx>
Re: Growing RAID1 array with bitmaps enabled
- From: Bryan Mesich <bryan.mesich@xxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: RAID 6 recovery (it's not looking good)
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: RAID 6 recovery (it's not looking good)
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Aw: Roadmap for md/raid ???
- From: piergiorgio.sartor@xxxxxxxx
Re: detection/correction of corruption with raid6
- From: piergiorgio.sartor@xxxxxxxx
Re[2]: [PATCH 02/11][v2] async_tx: add support for asynchronous GF multiplication
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PULL-REQUEST] md: avoid bogus read error on large-PAGE_SIZE machines
- From: Neil Brown <neilb@xxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: Growing RAID1 array with bitmaps enabled
- From: Neil Brown <neilb@xxxxxxx>
Re: detection/correction of corruption with raid6
- From: Neil Brown <neilb@xxxxxxx>
RE: upgrade advice / Disk drive failure rates - real world
- From: "David Lethe" <david@xxxxxxxxxxxx>
Growing RAID1 array with bitmaps enabled
- From: Bryan Mesich <bryan.mesich@xxxxxxxx>
Re: MD: Feature Request: Estimate of blocks necessary to complete sync
- From: Neil Brown <neilb@xxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Neil Brown <neilb@xxxxxxx>
Roadmap for md/raid ???
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: MDADM Software Raid Woes
- From: "NeilBrown" <neilb@xxxxxxx>
Re: MDADM Software Raid Woes
- From: "Dylan Taft" <d13f00l@xxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Bill Davidsen <davidsen@xxxxxxx>
RE: upgrade advice / Disk drive failure rates - real world
- From: "Max Waterman" <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: MDADM Software Raid Woes
- From: "NeilBrown" <neilb@xxxxxxx>
RE: upgrade advice / Disk drive failure rates - real world
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: upgrade advice
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: upgrade advice
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: upgrade advice
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Re: linux raid faq
- From: David Greaves <david@xxxxxxxxxxxx>
RE: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: [mdadm git pull] platform support v2 and other fixes
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: md looping on recovery of raid1 array
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
RE: detection/correction of corruption with raid6
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: [PATCH 02/11][v2] async_tx: add support for asynchronous GF multiplication
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
linux raid faq
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
RE: detection/correction of corruption with raid6
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: upgrade advice
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
RE: upgrade advice
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Bill Davidsen <davidsen@xxxxxxx>
RE: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: upgrade advice
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: raid10 far layout outperforms offset at writing? (was: Help with chunksize on raid10 -p o3 array)
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
RE: upgrade advice
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: upgrade advice
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: raid10 far layout outperforms offset at writing? (was: Help with chunksize on raid10 -p o3 array)
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
raid10 far layout outperforms offset at writing? (was: Help with chunksize on raid10 -p o3 array)
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..)
- From: Bruce Allen <ballen@xxxxxxxxxxxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: David Greaves <david@xxxxxxxxxxxx>
Re: upgrade advice
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: RAID 6 recovery (it's not looking good)
- From: Bernd Schubert <bs@xxxxxxxxx>
Re: upgrade advice
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: "Chris Worley" <worleys@xxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Re: raid1 recovery: reads and writes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: RAID 6 recovery (it's not looking good)
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: RAID 6 recovery (it's not looking good)
- From: Bernd Schubert <bs@xxxxxxxxx>
Resync dropping drive with read-errors
- From: John Hendrikx <hjohn@xxxxxxxxx>
Re: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: can I freeze I/O for some time to a given disk / md / dm device?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: can I freeze I/O for some time to a given disk / md / dm device?
- From: Gabor Gombas <gombasg@xxxxxxxxx>
Re: upgrade advice
- From: "Ryan Wagoner" <rswagoner@xxxxxxxxx>
Re: upgrade advice
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
RAID 6 recovery (it's not looking good)
- From: Iain Rauch <groups@xxxxxxxxxxxxxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
Re: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
raid5 with 2 disks not working correctly. Need help!
- From: "Roy Lim" <cableroy@xxxxxxxxx>
Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..)
- From: Bruce Allen <ballen@xxxxxxxxxxxxxxxxxxxx>
Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..)
- From: Bruce Allen <ballen@xxxxxxxxxxxxxxxxxxxx>
Re: upgrade advice
- From: "Max Waterman" <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: upgrade advice
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: [smartmontools-support] Velociraptor biting the dust (9th disk, continued to use it, and..)
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: upgrade advice
- From: "Max Waterman" <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: David Greaves <david@xxxxxxxxxxxx>
can I freeze I/O for some time to a given disk / md / dm device?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
Re: upgrade advice
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: upgrade advice
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: MD: Feature Request: Estimate of blocks necessary to complete sync
- From: Andre Noll <maan@xxxxxxxxxxxxxxx>
upgrade advice
- From: "Max Waterman" <davidmaxwaterman@xxxxxxxxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: MD Feature Request: non-degraded component replacement
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
MD Feature Request: non-degraded component replacement
- From: David Greaves <david@xxxxxxxxxxxx>
Re: 2.6.27.8: OOM killer: [swapper: page allocation failure]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Mattias Wadenstein <maswan@xxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Neil Brown <neilb@xxxxxxx>
Re: MD: Feature Request: Estimate of blocks necessary to complete sync
- From: Neil Brown <neilb@xxxxxxx>
Re: Awful Raid10,f2 performance
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: raid5 reshape stuck
- From: Neil Brown <neilb@xxxxxxx>
Re: raid1 recovery: reads and writes
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: RAID1 extreme low performance
- From: Neil Brown <neilb@xxxxxxx>
Re: behavior different from mdadm 2.6.4 and 3.0?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: md looping on recovery of raid1 array
- From: Neil Brown <neilb@xxxxxxx>
Re: behavior different from mdadm 2.6.4 and 3.0?
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
[ANNOUNCE] Einarc - universal RAID management/monitoring tool - v1.3
- From: "Mikhail Yakshin" <greycat.na.kor@xxxxxxxxx>
Re: raid1 recovery: reads and writes
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: 2.6.27.8: OOM killer: [swapper: page allocation failure]
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: raid1 + writemostly
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Help recovering RAID6 failure
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Neil Brown <neilb@xxxxxxx>
Re: Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: Help recovering RAID6 failure
- From: Neil Brown <neilb@xxxxxxx>
Re: Help recovering RAID6 failure
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: Help recovering RAID6 failure
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: Help recovering RAID6 failure
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: Basic RAID5/6 reshape question
- From: Neil Brown <neilb@xxxxxxx>
Re: Basic RAID5/6 reshape question
- From: Neil Brown <neilb@xxxxxxx>
Re: Help recovering RAID6 failure
- From: Neil Brown <neilb@xxxxxxx>
Re: Data loss on MD RAID5 reshape?
- From: Neil Brown <neilb@xxxxxxx>
Help recovering RAID6 failure
- From: Kevin Shanahan <kmshanah@xxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: Neil Brown <neilb@xxxxxxx>
Re: behavior different from mdadm 2.6.4 and 3.0?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: raid1 + writemostly
- From: Neil Brown <neilb@xxxxxxx>
Re: behavior different from mdadm 2.6.4 and 3.0?
- From: Neil Brown <neilb@xxxxxxx>
Re: raid1 recovery: reads and writes
- From: Neil Brown <neilb@xxxxxxx>
md looping on recovery of raid1 array
- From: Bin Guo <bguo@xxxxxxxxxxxxxxxxxxx>
raid1 + writemostly
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
behavior different from mdadm 2.6.4 and 3.0?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
raid1 recovery: reads and writes
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Awful Raid10,f2 performance
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: weird issues with raid1
- From: Neil Brown <neilb@xxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
raid1 + bitmaps, but the bitmap isn't being used?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Dave Chinner <david@xxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Michal Soltys <soltys@xxxxxxxx>
Re: Raid 5 Problem
- From: Michal Soltys <soltys@xxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: pg_xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Michal Soltys <soltys@xxxxxxxx>
Re: Raid 5 Problem
- From: "Nigel J. Terry" <nigel@xxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
Re: Raid 5 Problem
- From: Michal Soltys <soltys@xxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Raid 5 Problem
- From: nterry <nigel@xxxxxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: Help a Newbie on Linux-Raid 1
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Help a Newbie on Linux-Raid 1
- From: dturner <dan@xxxxxxxxxxxxxxxx>
Re: Data loss on MD RAID5 reshape?
- From: Michal Soltys <soltys@xxxxxxxx>
RE: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Eric Sandeen <sandeen@xxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Martin Steigerwald <Martin@xxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Intel X25-E running Linux using XFS
- From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
Re: Basic RAID5/6 reshape question
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Intel X25-E running Linux using XFS
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Basic RAID5/6 reshape question
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: Intel X25-E running Linux using XFS
- From: Pavel Machek <pavel@xxxxxxx>
Re: 2.6.27.8: OOM killer: [swapper: page allocation failure]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
RAID1 extreme low performance
- From: Federico <undicizeri@xxxxxxxxx>
2.6.27.8: OOM killer: [swapper: page allocation failure]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Basic RAID5/6 reshape question
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Basic RAID5/6 reshape question
- From: "Ryan Wagoner" <rswagoner@xxxxxxxxx>
Re: Kernel BUG
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: problem with software RAID5
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
RE: status of raid 4/5 disk reduce
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
MD: Feature Request: Estimate of blocks necessary to complete sync
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
problem with software RAID5
- From: Lars Schimmer <l.schimmer@xxxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Louis-David Mitterrand <vindex+lists-linux-raid@xxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Alex Lilley <alex@xxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
Basic RAID5/6 reshape question
- From: Brad Campbell <brad@xxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
RE: status of raid 4/5 disk reduce
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: array always resyncs on boot
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
Linux RAID autodetect partitions go missing from /dev, but fdisk can see them
- From: Tor Arne Vestbø <torarnv@xxxxxxxxx>
Re: Data loss on MD RAID5 reshape?
- From: Bob Bell <b_linuxraid@xxxxxxxxxxxxxxxxx>
Re[2]: [PATCH] ASYNC_TX: async_xor mapping fix
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: [PATCH] ASYNC_TX: async_xor mapping fix
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Alex Lilley <alex@xxxxxxxxxxxx>
Re: Re[2]: [PATCH 01/11] async_tx: don't use src_list argument of async_xor() for dma addresses
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
Re: Data integrity and RAID
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: "Ryan Wagoner" <rswagoner@xxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
RE: status of raid 4/5 disk reduce
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: status of raid 4/5 disk reduce
- From: Alex Lilley <alex@xxxxxxxxxxxx>
Re: Data integrity and RAID
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Data integrity and RAID
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
RE: Data integrity and RAID
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Data integrity and RAID
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Data integrity and RAID
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
[mdadm git pull] platform support v2 and other fixes
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
Re[2]: [PATCH 11/11] ppc440spe-adma: ADMA driver for PPC440SP(e) systems
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re[2]: [PATCH 01/11] async_tx: don't use src_list argument of async_xor() for dma addresses
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: [PATCH 01/11] async_tx: don't use src_list argument of async_xor() for dma addresses
- From: "Dan Williams" <dan.j.williams@xxxxxxxxx>
[PATCH 10/11] md: remove unused functions
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 09/11] md: change handle_stripe6 to work asynchronously
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 08/11] md: asynchronous handle_parity_check6
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 06/11] md: change handle_stripe_fill6 to work in asynchronous way
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 05/11] md: common schedule_reconstruction for raid5/6
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 04/11][v2] md: run RAID-6 stripe operations outside the lock
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 03/11][v2] async_tx: add support for asynchronous RAID6 recovery operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 02/11][v2] async_tx: add support for asynchronous GF multiplication
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[PATCH 01/11] async_tx: don't use src_list argument of async_xor() for dma addresses
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
[RFC PATCH 00/11][v2] md: support for asynchronous execution of RAID6 operations
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: [PATCH] ASYNC_TX: async_xor mapping fix
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
status of raid 4/5 disk reduce
- From: Michael Brancato <mike@xxxxxxxxxxxxxxxx>
[PATCH] ASYNC_TX: async_xor mapping fix
- From: Yuri Tikhonov <yur@xxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
XFS benchmarks on 3ware 9650SE-16ML Controller: RAID 6
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: 3ware 9650SE-16ML w/XFS & RAID6: first impressions
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>
Re: 3ware 9650SE-16ML w/XFS & RAID6: first impressions
- From: "Hans-Peter Jansen" <hpj@xxxxxxxxx>
JFS + RAID issue?
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: pg_xf2@xxxxxxxxxxxxxxxxxx (Peter Grandi)
Re: Have the velociraptors in a test system now, checkout the errors.
- From: "Kyle Moffett" <kyle@xxxxxxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: John Robinson <john.robinson@xxxxxxxxxxx>
Re: 12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Eric Sandeen <sandeen@xxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
12x performance drop on md/linux+sw raid1 due to barriers [xfs]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: weird issues with raid1
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Have the velociraptors in a test system now, checkout the errors.
- From: Michael Tokarev <mjt@xxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Michal Soltys <soltys@xxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Have the velociraptors in a test system now, checkout the errors.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Velociraptor drive related to the use of NCQ.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: David Greaves <david@xxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
weird issues with raid1
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
RE: Need urgent help in fixing raid5 array
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: time limited error recovery and md raid
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Data loss on MD RAID5 reshape?
- From: Bob Bell <b_linuxraid@xxxxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: "Michał Przyłuski" <mikylie@xxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Peter Rabbitson <rabbit+list@xxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: "Michał Przyłuski" <mikylie@xxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: detection/correction of corruption with raid6
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: time limited error recovery and md raid
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
detection/correction of corruption with raid6
- From: Redeeman <redeeman@xxxxxxxxxxx>
time limited error recovery and md raid
- From: Redeeman <redeeman@xxxxxxxxxxx>
Re: raid6's using not the best bandwidth method && raid6 algo is significantly slower in x86_64.
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
Need urgent help in fixing raid5 array
- From: Mike Myers <mikesm559@xxxxxxxxx>
raid1 and write-mostly
- From: "Jon Nelson" <jnelson-linux-raid@xxxxxxxxxxx>
Re: Velociraptor drive related to the use of NCQ.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: raid6's using not the best bandwidth method && raid6 algo is significantly slower in x86_64.
- From: "Igor Podlesny" <for.poige+linux@xxxxxxxxx>
Velociraptor drive related to the use of NCQ.
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: Crash while increasing RAID5 from 3 disks to 5, array won't build.
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
Re: Synchronous vs asynchonous mdadm operations
- From: Neil Brown <neilb@xxxxxxx>
Re: Crash while increasing RAID5 from 3 disks to 5, array won't build.
- From: "Sean Hildebrand" <silverwraithii@xxxxxxxxx>
Re: Adding a component to an array which has changed size
- From: "NeilBrown" <neilb@xxxxxxx>
Data integrity and RAID
- From: "peter.stevens" <Peter.Stevens@xxxxxxxxx>
Adding a component to an array which has changed size
- From: Chris Webb <chris@xxxxxxxxxxxx>
Re: Synchronous vs asynchonous mdadm operations
- From: Chris Webb <chris@xxxxxxxxxxxx>
RE: raid5 failed logical and physically; how to reconstruct?
- From: "David Lethe" <david@xxxxxxxxxxxx>
Re: raid5 failed logical and physically; how to reconstruct?
- From: "Greg Freemyer" <greg.freemyer@xxxxxxxxx>
Re: raid1 with possible lock inversion
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
raid1 with possible lock inversion
- From: "Ana Paula" <anapaula@xxxxxxxxxxxxxx>
RE: raid5 failed logical and physically; how to reconstruct?
- From: "David Lethe" <david@xxxxxxxxxxxx>
raid5 failed logical and physically; how to reconstruct?
- From: Paul Schriever <paul@xxxxxxxxxxxxxxxx>
Re: Crash while increasing RAID5 from 3 disks to 5, array won't build.
- From: "Sean Hildebrand" <silverwraithii@xxxxxxxxx>
Re: Crash while increasing RAID5 from 3 disks to 5, array won't build.
- From: "NeilBrown" <neilb@xxxxxxx>
Crash while increasing RAID5 from 3 disks to 5, array won't build.
- From: "Sean Hildebrand" <silverwraithii@xxxxxxxxx>
3ware 9650SE-16ML w/XFS & RAID6: first impressions
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Michal Soltys <soltys@xxxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: array always resyncs on boot
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>
Re: Kernel BUG
- From: Neil Brown <neilb@xxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Holger Mauermann <mauermann@xxxxxxxxx>
Kernel BUG
- From: "Justin Maggard" <jmaggard10@xxxxxxxxx>
Re: mdadm --incremental /dev/md?? instead of /dev/md/d??
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: [mdadm git pull] support for detecting platform raid capabilities and some fixes
- From: Neil Brown <neilb@xxxxxxx>
Re: mdadm --incremental /dev/md?? instead of /dev/md/d??
- From: Neil Brown <neilb@xxxxxxx>
raid5 system degraded and on boot can no longer log on
- From: junk@xxxxxxxxxxxxxxxx
failed raid5, how to reconstruct?
- From: junk@xxxxxxxxxxxxxxxx
Re: array always resyncs on boot
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>
Re: array always resyncs on boot
- From: Bill Davidsen <davidsen@xxxxxxx>
Re: LVM on raid10,f2 performance issues
- From: Keld Jørn Simonsen <keld@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@xxxxxxxxxxxxx>
raid1 bitmap=internal fails for specific sizes
- From: Markus Hochholdinger <Markus@xxxxxxxxxxxxxxxxx>
Re: mdadm: suppress sending emails on events
- From: "NeilBrown" <neilb@xxxxxxx>
Re: mdadm: suppress sending emails on events [solved] (dumb question - sorry)
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
mdadm: suppress sending emails on events
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: array always resyncs on boot
- From: Luca Berra <bluca@xxxxxxxxxx>
Re: mdadm --incremental and different config file
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm --incremental /dev/md?? instead of /dev/md/d??
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: "NeilBrown" <neilb@xxxxxxx>
Re: mdadm --incremental /dev/md?? instead of /dev/md/d??
- From: "NeilBrown" <neilb@xxxxxxx>
Re: mdadm --incremental and different config file
- From: "NeilBrown" <neilb@xxxxxxx>
LVM on raid10,f2 performance issues
- From: Holger Mauermann <mauermann@xxxxxxxxx>
Re: array always resyncs on boot
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>
mdadm --incremental and different config file
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
mdadm --incremental /dev/md?? instead of /dev/md/d??
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: mdadm and automatic re-add / incremental mode with usb-disk
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
mdadm and automatic re-add / incremental mode with usb-disk
- From: Wilhelm Meier <wilhelm.meier@xxxxxxxx>
Re: array always resyncs on boot
- From: Tom Walsh <tom@xxxxxxxxxxxxxxxx>

[Index of Archives] [Linux RAID Wiki] [ATA RAID] [Linux SCSI Target Infrastructure] [Linux Block] [Linux IDE] [Linux SCSI] [Linux Hams] [Device Mapper] [Kernel] [Linux Admin] [Linux Net] [GFS] [RPM] [git] [Yosemite Forum] [Linux Networking]