On Fri, 2 Jan 2009, Mike Myers wrote:
Well, I can read from sdg1 just fine. It seems to work ok, at least for a few GB of data. I'll try this on some of the other disks, but it is possible for to pull the disks out of the backplane and run the SFF-8087 fanout cables direct to each drive and bypass the backplane completely. It certainly would be easy to do this for the at least the sdo1 drive and see if I can get better results going direct to the disk. I have moved the disks around the backplane a bit to deal with the issues of the controller failure, so I am pretty sure it's not just one bad slot or the like. So you've seen a backplane fail in away that the disks come up fine at boot but have corrupted data transfers across them? I wonder about the sata cables in that case as well. I could hook up a pair of PMP's to my SI3132's and bypass the 8077 cables as well.
1. Try by-passing the backplane. 2. Bad cables will usually cause smart identifier UDMA_CRC_Error_Count to increase quite high, if it is 0 or close to it, the cable is unlikely the issue. 3. I have seem all kinds of weirdness with bad backplanes, drives dropping out of the array, drives producing I/O errors, etc. Justin. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
