LM Sensors

• Thread Index

• Inquiry about lm_sensors compatibility with ThinkPad P16 Gen 2
  • From: Rafał Hyćko <rafal.hycko@xxxxxxxxx>
• My computer randomly powers down
  • From: Victor Porton <porton.victor@xxxxxxxxx>
• Trying to find a way to support lm-sensors on my AlmaLinux 9.3 PC
  • From: Mark Hansen <mark@xxxxxxxxxxxxxxxxx>
• Processor temperature.
  • From: Bill Swisher <bill@xxxxxxxxxxxx>
• numbered labels make JSON parsing difficult
  • From: sukolyn <sukolyn@xxxxxxxxxxxxxx>
• PSA: this list has moved to new vger infra (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• Fan speed rpm not appearing in sensor
  • From: Rabindra Paikaray <rabipaikaray@xxxxxxxxx>
• bnxt_en kernel module is reporting a 92 degrees C
  • From: "Rundblom, Glen" <rundblom@xxxxxxxxxxxx>
• label when space in sensor name
  • From: Antonio Marcheselli <antonio.marcheselli@xxxxxxxxx>
• [PATCH] Fix support for pwmfan driver since kernel v6.1
  • From: Michael Heimpold <michael.heimpold@xxxxxxxxxxxxxx>
• Re: kernel modules
  • From: Jonas Malaco <jonas@xxxxxxxxxxxx>
• kernel modules
  • From: mike mccool <mc@xxxxxxx>
• Updated config file for ASUS TUF GAMING X570 PLUS
  • From: glen <glenjo@xxxxxxxxx>
• Re: dht11 vs iio-hwmon
  • From: Dag B <dag@xxxxxxxxx>
• Re: dht11 vs iio-hwmon
  • From: Dag B <dag@xxxxxxxxx>
• dht11 vs iio-hwmon
  • From: Dag B <dag@xxxxxxxxx>
• RFE: Support for Noise detection sensor on Gigabyte X570 Boards
  • From: Nikola Marjanovic <nikmarjanovic@xxxxxxxxx>
• Trying to understand `sensors` output (Debian 11 LXDE)
  • From: riveravaldez <riveravaldezmail@xxxxxxxxx>
• Reading temps on ASRock x570d4i-2t
  • From: Andreas Schaufler <andreas.schaufler@xxxxxx>
• Gigabyte GA-Z68AP-D3.conf pull request
  • From: Stephen <clipo1979@xxxxxxxxxxxxxx>
• Was `sensors` causing a lag in input devices?
  • From: riveravaldez <riveravaldezmail@xxxxxxxxx>
• [PATCH] pwmconfig: Further raise the fan threshold
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] pwmconfig: Deal gracefully with unreadable fan inputs
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] hwmon: (nct6683) Support NCT6687D.
  • From: David Bartley <andareed@xxxxxxxxx>
• GIGABYTE B250M-DS3H motherboard
  • From: Sam Przyswa <przyswa.sam@xxxxxxx>
• stuck thermal sensor on Thinkpad X201t
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• Configuring PWM sysfs entries
  • From: Domenico Andreoli <domenico.andreoli@xxxxxxxxx>
• how to ensure that sensors-detect didn't cause any damage
  • From: Maheshwarran Karthikeyan <klmahesh96@xxxxxxxxx>
• Re: [PATCH v3] Add ISA ACPI sensor driver name support
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• [PATCH v3] Add ISA ACPI sensor driver name support
  • From: Hoan Tran <Hoan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Add ISA ACPI sensor driver name support
  • From: Hoan Tran <hoan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] Add ISA ACPI sensor driver name support
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• [PATCH v2] Add ISA ACPI sensor driver name support
  • From: Hoan Tran <Hoan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] Add ISA ACPI sensor driver name support
  • From: Hoan Tran <Hoan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Help with Intel 945GCL MB and Intel 950 CPU hwmon temp
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: Help with Intel 945GCL MB and Intel 950 CPU hwmon temp
  • From: Brian <bvamundsen@xxxxxxxxx>
• Displaying fan speeds
  • From: Richard Kimber <richardkimber@xxxxxxxxxxxxxx>
• Displaying fan speeds
  • From: Richard Kimber <richardkimber@xxxxxxxxxxxxxx>
• Re: [PATCH] sensors-detect: Move Winbond WPCD377I to the non-hwmon table
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: [PATCH v2] sensors-detect: Fix the driver for Nuvoton W83677HG-I
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• [PATCH] sensors-detect: Move Winbond WPCD377I to the non-hwmon table
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] sensors-detect: Fix the driver for Nuvoton W83677HG-I
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Fix the driver for Nuvoton W83677HG-I
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Fix the driver for Nuvoton W83677HG-I
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] sensors-detect: Fix the driver for Nuvoton W83677HG-I
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Patch submission
  • From: Sandeep <sandy.8925@xxxxxxxxx>
• Re: Patch submission
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Patch submission
  • From: Sandeep <sandy.8925@xxxxxxxxx>
• Re: ignore setting in sensors.conf only works with lowercase arguments
  • From: Sandeep <sandy.8925@xxxxxxxxx>
• Re: ignore setting in sensors.conf only works with lowercase arguments
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• ignore setting in sensors.conf only works with lowercase arguments
  • From: Sandeep <sandy.8925@xxxxxxxxx>
• Re: [RFC] why do sensors break CPU scaling
  • From: Tom Psyborg <pozega.tomislav@xxxxxxxxx>
• Re: Is a temperature missing in sensors ?
  • From: David VANTYGHEM <david.vantyghem@xxxxxxxxxx>
• Re: Is a temperature missing in sensors ?
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Is a temperature missing in sensors ?
  • From: David VANTYGHEM <david.vantyghem@xxxxxxxxxx>
• Fujitsu-Siemens w380
  • From: Herr Oswald <herr_oswald@xxxxxx>
• Announcing lm_sensors 3.6.0
  • From: olysonek@xxxxxxxxxx (Ondřej Lysoněk)
• Re: [PATCH] libsensors: Prevent warning with glibc >= 2.20
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• [PATCH] libsensors: Prevent warning with glibc >= 2.20
  • From: Jean Delvare <jdelvare@xxxxxxx>
• HP Compaq 8200 Elite SFF
  • From: Paul C Diem <PCDiem@xxxxxxxxxxxxx>
• Fwd: Lm-sensor don't detect my laptop fan
  • From: kannan r <kannanr2k7@xxxxxxxx>
• Re: i7-8550U core temps
  • From: Pekka Sarnila <sarnila@xxxxxxx>
• Re: i7-8550U core temps
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• i7-8550U core temps
  • From: Pekka Sarnila <sarnila@xxxxxxx>
• Re: Intel X550-T2
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: Intel X550-T2
  • From: Mikko Laaksonen <mikko.praha@xxxxxxxxx>
• Re: Intel X550-T2
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Intel X550-T2
  • From: Mikko Laaksonen <mikko.praha@xxxxxxxxx>
• huge fluctuations of fan speed reported for MSI X370
  • From: Michael Brunsteiner <michael.brunsteiner@xxxxxxx>
• Re: libsensors soname bump
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: libsensors soname bump
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: libsensors soname bump
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Announcing lm_sensors 3.5.0
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Re: github , lm-sensors tag release
  • From: Jean-Marc Pigeon <jmp@xxxxxxx>
• Re: github , lm-sensors tag release
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• github , lm-sensors tag release
  • From: Jean-Marc Pigeon <jmp@xxxxxxx>
• Re: [PATCH v3] hwmon/max6650.c: Add devicetree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] hwmon/max6650.c: Add devicetree support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] hwmon/max6650.c: Add devicetree support
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v2] hwmon/max6650.c: Add devicetree support
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [RFC][PATCH] hwmon/max6650.c: Optionally retrieve voltage and prescaler from devicetree
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [RFC][PATCH] hwmon/max6650.c: Optionally retrieve voltage and prescaler from devicetree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC][PATCH] hwmon/max6650.c: Optionally retrieve voltage and prescaler from devicetree
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [RFC][PATCH] hwmon/max6650.c: Optionally retrieve voltage and prescaler from devicetree
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] hwmon: Update guildelines for submitting patches
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (lm90) use proper type for update_interval
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (lm90) use proper type for update_interval
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Problems with lm-sensors web site / Wiki
  • From: Simon van der Veldt <simon.vanderveldt+lm_sensors@xxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• Re: SB800 support
  • From: Marcin Nowak <galandilias@xxxxxxxxx>
• Re: [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v5] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5] hwmon: (max31722) Add threshold alarm support
  • From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH v5] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5] hwmon: (max31722) Add threshold alarm support
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH v4] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] hwmon: (max31722) Add threshold alarm support
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH v3] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] hwmon: (max31722) Add threshold alarm support
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (max31722) Add threshold alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (max31722) Add threshold alarm support
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH v4] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: ncpXXxh103 compensation values?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: ncpXXxh103 compensation values?
  • From: Maxime Jayat <jayatmaxime@xxxxxxxxx>
• Re: ncpXXxh103 compensation values?
  • From: Joseph McNally <jmcna06@xxxxxxxxx>
• [PATCH v3] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• ncpXXxh103 compensation values?
  • From: Maxime Jayat <jayatmaxime@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH 0/2] hwmon: adc128d818: Support operation mode 1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: adc128d818: Implement operation mode 1
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: adc128d818: Implement chip mode selection
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: adc128d818: Implement operation mode 1
  • From: Alexander Koch <mail@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] hwmon: adc128d818: Support operation mode 1
  • From: Alexander Koch <mail@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] hwmon: adc128d818: Implement chip mode selection
  • From: Alexander Koch <mail@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (max31722) Add alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (max31722) Add alarm support
  • From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
• [GIT PULL] hwmon fixes for v4.6-rc2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• [PATCH] hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] hwmon updates for v4.6 (take two)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update mailing list and web page for hwmon subsystem
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Update mailing list and web page for hwmon subsystem
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (max31722) Add alarm support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• [PATCH 2/2] hwmon: (max31722) Add alarm support
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• Re: [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Add support for MAX31722/MAX31723 temperature sensors
  • From: "Breana, Tiberiu A" <tiberiu.a.breana@xxxxxxxxx>
• Re: [PATCH 13/13] thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_register
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register
  • From: Wei Ni <wni@xxxxxxxxxx>
• Re: [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 04/13] hwmon: convert scpi-hwmon to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 11/13] thermal: convert exynos to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 1/1] hwmon: add support for Sensirion SHT3x sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] hwmon: add support for Sensirion SHT3x sensors
  • From: Pascal Sachs <Pascal.Sachs@xxxxxxxxxxxxx>
• [GIT PULL] hwmon updates for v4.6
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 0/6] hwmon: (fam15h_power) Introduce an accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 4/6] hwmon: (fam15h_power) Introduce a cpu accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 5/6] hwmon: (fam15h_power) Add documentation for TDP and accumulated power algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 6/6] hwmon: (fam15h_power) Add platform check function
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 3/6] hwmon: (fam15h_power) Add ptsc counter value for accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v4 1/6] hwmon: (fam15h_power) Add CPU_SUP_AMD as the dependence
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 1/1] hwmon: add support for Sensirion SHT3x sensors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] hwmon: add support for Sensirion SHT3x sensors
  • From: Pascal Sachs <Pascal.Sachs@xxxxxxxxxxxxx>
• Re: [PATCH 11/13] thermal: convert exynos to use devm_thermal_zone_of_sensor_register
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register
  • From: Wei Ni <wni@xxxxxxxxxx>
• Re: [PATCH 03/13] hwmon: convert tmp102 to use devm_thermal_zone_of_sensor_register
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 03/13] hwmon: convert tmp102 to use devm_thermal_zone_of_sensor_register
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 01/13] hwmon: convert lm75 to use devm_thermal_zone_of_sensor_register
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 02/13] hwmon: convert ntc_thermistor to use devm_thermal_zone_of_sensor_register
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 10/13] thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_register
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• Re: [PATCH 04/13] hwmon: convert scpi-hwmon to use devm_thermal_zone_of_sensor_register
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 02/13] hwmon: convert ntc_thermistor to use devm_thermal_zone_of_sensor_register
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 11/13] thermal: convert exynos to use devm_thermal_zone_of_sensor_register
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 02/13] hwmon: convert ntc_thermistor to use devm_thermal_zone_of_sensor_register
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 01/13] hwmon: convert lm75 to use devm_thermal_zone_of_sensor_register
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 10/13] thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_register
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 13/13] thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_register
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 10/13] thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 13/13] hwmon: convert ti-thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 13/13] thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 08/13] thermal: convert qcom-spmi to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 09/13] thermal: convert rcar_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 06/13] thermal: convert hisi_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 07/13] thermal: convert mtk_thermal to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 04/13] hwmon: convert scpi-hwmon to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 00/13] thermal: convert users of thermal_zone_of_sensor_register to devm_
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 02/13] hwmon: convert ntc_thermistor to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 01/13] hwmon: convert lm75 to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 03/13] hwmon: convert tmp102 to use devm_thermal_zone_of_sensor_register
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• New mailing list 'linux-hwmon' at vger.kernel.org
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Fulcrum <fulcrummike@xxxxxxxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Fulcrum <fulcrummike@xxxxxxxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Missing Code v4.5-rc1 [Patch v3 25/25] IT8628E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Missing Code v4.5-rc1 [Patch v3 25/25] IT8628E
  • From: Sardaukai <sardaukai@xxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] [linux-next] Doc: hwmon: Fix typo "montoring" in hwmon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] [linux-next] Doc: hwmon: Fix typo "montoring" in hwmon
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• Re: Missing Code v4.5-rc1 [Patch v3 25/25] IT8628E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Missing Code v4.5-rc1 [Patch v3 25/25] IT8628E
  • From: Sardaukai <sardaukai@xxxxxx>
• Re: Support for Acer Revo One RL85
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Datasheet for Fintek F71868a
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Datasheet for Fintek F71868a
  • From: Foxtrot Mike <fulcrummike@xxxxxxxxxxx>
• Re: [GIT PULL] hwmon fixes for v4.5-rc6
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL] hwmon fixes for v4.5-rc6
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] ARM: dts: Change iio_hwmon nodes to use hypen in node names
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] hwmon fixes for v4.5-rc6
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: (ads1015) Handle negative conversion values correctly
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• Re: Support for Acer Revo One RL85
  • From: Jamie Kitson <jamie@xxxxxxxxxxxx>
• Re: Support for Acer Revo One RL85
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Support for Acer Revo One RL85
  • From: Jamie Kitson <jamie@xxxxxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (ads1015) Handle negative conversion values correctly
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ads1015) Handle negative conversion values correctly
  • From: Peter Rosin <peda@xxxxxxxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• Re: Fwd: The sad state of lm-sensors.org
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Fwd: The sad state of lm-sensors.org
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• [PATCH] hwmon: (ads1015) Handle negative conversion values correctly
  • From: Peter Rosin <peda@xxxxxxxxxxxxxx>
• Re: IT8620E/IT8623E vs. IT8603E
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: IT8620E/IT8623E vs. IT8603E
  • From: Sebastian Hahn <lm_sensors@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Allow iio_hwmon to accept hypen in node names
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  • From: Stefan Agner <stefan@xxxxxxxx>
• [PATCH v3 3/3] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 2/3] ARM: dts: Change iio_hwmon nodes to use hypen in node names
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 0/3] Allow iio_hwmon to accept hypen in node names
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• [PATCH v3 1/3] hwmon: iio_hwmon: Allow the driver to accept hypen in device tree node names
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (scpi) add energy meter support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] firmware: arm_scpi: add support for 64-bit sensor values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (scpi) add energy meter support
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH 1/2] firmware: arm_scpi: add support for 64-bit sensor values
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH v2] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  • From: maitysanchayan@xxxxxxxxx
• [PATCH 1/2] firmware: arm_scpi: add support for 64-bit sensor values
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH 2/2] hwmon: (scpi) add energy meter support
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: adt7473 for NVIDIA
  • From: PhiLLip Pi <ant@xxxxxxxxxx>
• Re: [PATCH] hwmon: (vexpress) rename vexpress hwmon implementation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (vexpress) rename vexpress hwmon implementation
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [GIT PULL] hwmon fixes for v4.5-rc2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Gi-Oh Kim <gi-oh.kim@xxxxxxxxxxxxxxxx>
• Re: Problems with lm-sensors web site / Wiki
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: Problems with lm-sensors web site / Wiki
  • From: phil@xxxxxxxxxxxxxxxxx
• Re: Problems with lm-sensors web site / Wiki
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Problems with lm-sensors web site / Wiki
  • From: Philip Edelbrock <phil@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Gioh Kim <gi-oh.kim@xxxxxxxxxxxxxxxx>
• Re: [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Gi-Oh Kim <gi-oh.kim@xxxxxxxxxxxxxxxx>
• Re: [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH v3 09/25] hwmon: (it87) Use is_visible for voltage sensors
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 21/25] hwmon: (it87) Support disabling fan control for all pwm control and chips
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 23/25] hwmon: (it87) Support automatic pwm control on newer chips
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 22/25] hwmon: (it87) Enhance validation for fan4 and fan5
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 08/25] hwmon: (it87) Rearrange code to avoid forward declarations
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 24/25] hwmon: (it87) Fix pwm_temp_map for system with 6 pwm channels
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 06/25] hwmon: (it87) Pass SIO base address as parameter to superio functions
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 05/25] hwmon: (it87) Don't use pdev as static driver variable
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 07/25] hwmon: (it87) Add support for second Super-IO chip
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 25/25] hwmon: (it87) Add support for IT8628E
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 03/25] hwmon: (it87) Add support for second pwm frequency register
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 02/25] hwmon: (it87) Add support for all pwm channels on IT8620E
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 01/25] hwmon: (it87) Add feature flag for AVCC3 support
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 00/25] hwmon: (it87) Various enhancements and fixes
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 04/25] hwmon: (it87) Simplify error return in it87_device_add
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 10/25] hwmon: (it87) Use is_visible for temperature sensors
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 11/25] hwmon: (it87) Use is_visible for fan attributes
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 12/25] hwmon: (it87) Use is_visible for pwm attributes
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 13/25] hwmon: (it87) Use single group and is_visible for miscellaneous attributes
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 15/25] hwmon: (it87) Support up to 6 temperature sensors on IT8620E
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 16/25] hwmon: (it87) Simplify reading voltage registers
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 14/25] hwmon: (it87) Convert to use new hwmon API
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 17/25] hwmon: (it87) Add support for VIN7 to VIN10 on IT8620E
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 19/25] hwmon: (it87) Use defines for array sizes and sensor counts
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 18/25] hwmon: (it87) Use BIT macro
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 20/25] hwmon: (it87) Formatting cleanup
  • From: Guenter Roeck <patchwork@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Problems with lm-sensors web site / Wiki
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Problems with lm-sensors web site / Wiki
  • From: Paul Crawford <psc@xxxxxxxxxxxxxxxx>
• Re: [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Gi-Oh Kim <gi-oh.kim@xxxxxxxxxxxxxxxx>
• Re: [rtc-linux] [PATCH v4] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Huang Rui <ray.huang@xxxxxxx>
• [RFC] hwmon: (fam15h_power) Add bit masking for tdp_limit
  • From: Gioh Kim <gi-oh.kim@xxxxxxxxxxxxxxxx>
• Re: [NCT6775] Additional temperature sensors on nct6791d
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [NCT6775] Additional temperature sensors on nct6791d
  • From: Ville Aakko <ville.aakko@xxxxxxxxx>
• [PATCH v4] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [NCT6775] Additional temperature sensors on nct6791d
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [NCT6775] Additional temperature sensors on nct6791d
  • From: Ville Aakko <ville.aakko@xxxxxxxxx>
• Re: [PATCH v3] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v2] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v2] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v2] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] lm90: register with thermal zones
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] lm90: register with thermal zones
  • From: Stéphan Kochen <stephan@xxxxxxxxx>
• Re: [PATCH 3/3] lm90: register with thermal zones
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] lm90: initialize parameters from devicetree
  • From: Stéphan Kochen <stephan@xxxxxxxxx>
• Re: [PATCH 1/3] lm90: separate register accessors from sysfs
  • From: Stéphan Kochen <stephan@xxxxxxxxx>
• Re: [PATCH v2] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] rtc: rtc-ds1307: add temperature sensor support for ds3231
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH 2/3] lm90: initialize parameters from devicetree
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] lm90: separate register accessors from sysfs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: SB800 support
  • From: Marcin Nowak <galandilias@xxxxxxxxx>
• Re: SB800 support
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: SB800 support
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: it87 IT8620F support?
  • From: Joerg Walter <joerg.walter@xxxxxxxxx>
• Re: [PATCH] dell-smm: Blacklist Dell Studio XPS 8000
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] dell-smm: Blacklist Dell Studio XPS 8000
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] dell-smm: Blacklist Dell Studio XPS 8000
  • From: Thorsten Leemhuis <linux@xxxxxxxxxxxxx>
• Re: [PATCH v4] hwmon: Add LTC2990 sensor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v3] hwmon: Add LTC2990 sensor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2] hwmon: Add LTC2990 sensor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH v2] hwmon: Add LTC2990 sensor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH v2] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [GIT PULL] hwmon updates for v4.5
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Add LTC2990 sensor driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] hwmon: Add LTC2990 sensor driver
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] hwmon: ibmaem: constify aem_rw_sensor_template and aem_ro_sensor_template structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: Website down
  • From: Jean Delvare <jdelvare@xxxxxxx>
• linux-4.4-rc8/drivers/hwmon/lm93.c:398: possible int/long mixup ?
  • From: David Binderman <dcb314@xxxxxxxxxxx>
• Website down
  • From: Lew Pitcher <lew.pitcher@xxxxxxxxxxxxxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• [GIT PULL] hwmon fixes for v4.4-rc6
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: sht15 needs CONFIG_BITREVERSE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: it87 IT8620F support?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: it87 IT8620F support?
  • From: Sverd Johnsen <sverd.johnsen@xxxxxxxxxxxxxx>
• [PATCH] hwmon: sht15 needs CONFIG_BITREVERSE
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: [PATCH v3 1/2] iio: ina2xx: add support for TI INA2xx Power Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] hwmon: constify sensor_template_group structures
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH v3 2/2] iio: ina2xx: provide a sysfs parameter to allow async readout of the ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andy@xxxxxxxxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: LM90 driver and ti tmp461 detection
  • From: Andreas Werner <andreas.werner@xxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 1/2] hwmon: (fam15h_power) Add support for AMD new 15h processors
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 0/2] hwmon: (fam15h_power) Add new AMD family 15h processors
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 2/2] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: Asus Gene VI and Gene VII...same chip.....different outcomes.....BIOS settings?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Asus Gene VI and Gene VII...same chip.....different outcomes.....BIOS settings?
  • From: Another Sillyname <anothersname@xxxxxxxxxxxxxx>
• Website status?
  • From: Another Sillyname <anothersname@xxxxxxxxxxxxxx>
• Re: [PATCH V2] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V2] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: ina2xx: add support for TI INA2xx Power Monitors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] iio: ina2xx: add support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (tmp102) Force wait for conversion time for the first valid data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] iio: ina2xx: add support for TI INA2xx Power Monitors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: ina2xx: provide a sysfs parameter to allow async readout of the ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: ina2xx: add support for TI INA2xx Power Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: lm-sensors.org down - Development process changed?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: lm-sensors.org down - Development process changed?
  • From: Björn Gerhart <gerhart@xxxxxxxxx>
• Re: lm-sensors.org down - Development process changed?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: lm-sensors.org down - Development process changed?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: AMD A8 7600 - wrong values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: AMD A8 7600 - wrong values
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: AMD A8 7600 - wrong values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: AMD A8 7600 - wrong values
  • From: Peter Tuharsky <tuharsky@xxxxxxxx>
• Re: AMD A8 7600 - wrong values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• AMD A8 7600 - wrong values
  • From: Peter Tuharsky <tuharsky@xxxxxxxx>
• [GIT PULL] hwmon fixes for v4.4-rc2
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [v2] hwmon: (scpi) skip unsupported sensors properly
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH v2] hwmon: (scpi) skip unsupported sensors properly
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [v2] hwmon: (scpi) skip unsupported sensors properly
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: scpi: add thermal-of dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: scpi: add thermal-of dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: lm-sensors.org down?
  • From: George Joseph <george.joseph@xxxxxxxxxxxxx>
• Re: lm-sensors.org down?
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• lm-sensors.org down?
  • From: George Joseph <george.joseph@xxxxxxxxxxxxx>
• [PATCH v2] hwmon: (pmbus) Add client driver for LTC3815
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (htu21) Remove driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (htu21) Remove driver
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [GIT PULL] hwmon update for Linux 4.4
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] hwmon: (pmbus) Add client driver for LTC3815
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (htu21) Remove driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] hwmon: fix ina2xx build issue by selecting REGMAP_I2C
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon/applesmc: Fix uninitialized variables warnings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon/applesmc: Fix uninitialized variables warnings
  • From: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
• [PATCH] hwmon: fix ina2xx build issue by selecting REGMAP_I2C
  • From: Li Yang <leoli@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 14/16] hwmon: add TI LMU hardware fault monitoring driver
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: [PATCH RESEND 14/16] hwmon: add TI LMU hardware fault monitoring driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH RESEND 14/16] hwmon: add TI LMU hardware fault monitoring driver
  • From: Milo Kim <milo.kim@xxxxxx>
• [PATCH RESEND 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information
  • From: Milo Kim <milo.kim@xxxxxx>
• [PATCH 14/16] hwmon: add TI LMU hardware fault monitoring driver
  • From: Milo Kim <milo.kim@xxxxxx>
• [PATCH 03/16] Documentation: dt-bindings: hwmon: add TI LMU HWMON binding information
  • From: Milo Kim <milo.kim@xxxxxx>
• Re: [PATCH v3 02/10] hwmon: (fam15h_power) Enable power1_input on AMD Carrizo
  • From: Huang Rui <ray.huang@xxxxxxx>
• [GIT PULL] hwmon updates for v4.4
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 02/10] hwmon: (fam15h_power) Enable power1_input on AMD Carrizo
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (nct6775) Introduce separate temperature labels for NCT6792 and NCT6793
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: (nct6775) NCT6791D and NCT6792D have an additional temperature source
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: ina2xx: remove no longer used variable 'kind'
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (scpi) skip unsupported sensors properly
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: (scpi) skip unsupported sensors properly
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH] hwmon: (scpi) skip unsupported sensors properly
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH] hwmon: (scpi) skip unsupported sensors properly
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• [PATCH] hwmon: (scpi) skip unsupported sensors properly
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: Duplicate htu21 drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Duplicate htu21 drivers
  • From: Michal Marek <mmarek@xxxxxxx>
• [PATCH v3 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Duplicate htu21 drivers
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH v2 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [PATCH v2 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] hwmon: (nct7802) Add device tree support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v3] hwmon: (nct7802) Add device tree support
  • From: Constantine Shulyupin <const@xxxxxxxxxxxxx>
• [PATCH 1/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [PATCH 0/2] hwmon: ina2xx: convert driver to using regmap
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: ina2xx: give precedence to DT over checking for platform data.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC] hwmon: ina2xx: port to using remap, improve bandwidth.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Michael Turquette <mturquette@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC] hwmon: ina2xx: allow for actual measurement bandwidth above 160 Hz
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Support for it8587
  • From: Nicola Astudillo-Defru <astrodillo@xxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: "Odzioba, Lukasz" <lukasz.odzioba@xxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: "Odzioba, Lukasz" <lukasz.odzioba@xxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: "Odzioba, Lukasz" <lukasz.odzioba@xxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: "Odzioba, Lukasz" <lukasz.odzioba@xxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Phil Pokorny <ppokorny@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/1] Bumps limit of maximum core ID from 32 to 128.
  • From: Lukasz Odzioba <lukasz.odzioba@xxxxxxxxx>
• Re: [PATCH] lm75: Add support for the TMP75C
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] lm75: Add support for the TMP75C
  • From: Ben Gardner <gardner.ben@xxxxxxxxx>
• Re: nct5573D missing fans
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• nct5573D missing fans
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: [PATCH v2 05/10] Documentation: add DT bindings for ARM SCPI sensors
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (nct6775) Add support for NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (nct6775) Add support for NCT6793D
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [15/15] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Andreas Herrmann <herrmann.der.user@xxxxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] hwmon: (nct6775) Add support for NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6793D
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6793D
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: compilation under musl
  • From: Brendan Heading <brendanheading@xxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] sensors-detect: Add detection of Novoton NCT6793D
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: compilation under musl
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] sensors-detect: Add detection of Novoton NCT6793D
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [15/15] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH] sensors-detect: Add detection of Novoton NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL] hwmon updates for v4.3
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• compilation under musl
  • From: Brendan Heading <brendanheading@xxxxxxxxx>
• [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [15/15] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: The code crashes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] hwmon: The code crashes
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 10/15] hwmon, fam15h_power: add compute unit accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 03/15] hwmon, fam15h_power: refactor attributes for dynamically added
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH 10/15] hwmon, fam15h_power: add compute unit accumulated power
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [PATCH 4/4] i2c-piix4: Add adapter port name support for SB800 chipset
  • From: Christian Fetzer <fetzer.ch@xxxxxxxxx>
• [PATCH 3/4] i2c-piix4: Add support for multiplexed main adapter in SB800
  • From: Christian Fetzer <fetzer.ch@xxxxxxxxx>
• [PATCH 0/4] Support multiplexed main SMBus interface on SB800
  • From: Christian Fetzer <fetzer.ch@xxxxxxxxx>
• [PATCH 1/4] i2c-piix4: Optionally release smba in piix4_adap_remove
  • From: Christian Fetzer <fetzer.ch@xxxxxxxxx>
• [PATCH 2/4] i2c-piix4: Convert piix4_main_adapter to array
  • From: Christian Fetzer <fetzer.ch@xxxxxxxxx>
• Re: [hwmon:watchdog-next 25/25] drivers/watchdog/txx9wdt.c:134:20: error: 'pdev' undeclared
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: sensord
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Borislav Petkov <bp@xxxxxxxxx>
• sensord
  • From: Paul Hilt <paul@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] hwmon, fam15h_power: add ratio of Tsample to the PTSC period
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 04/15] hwmon, fam15h_power: update running_avg_capture bit field to 28
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 03/15] hwmon, fam15h_power: refactor attributes for dynamically added
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 06/15] hwmon, fam15h_power: add documentation for new processors support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 02/15] hwmon, fam15h_power: rename fam15h_power_is_internal_node0 function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 08/15] hwmon, fam15h_power: add max compute unit accumulated power
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 01/15] hwmon, fam15h_power: add support for AMD Carrizo
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 05/15] hwmon, fam15h_power: enable power1_input on AMD Carrizo
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [hwmon:watchdog-next 25/25] drivers/watchdog/txx9wdt.c:134:20: error: 'pdev' undeclared
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 13/15] hwmon, fam15h_power: add documentation for previous TDP reporting
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 14/15] hwmon, fam15h_power: add documentation for accumulated power algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 11/15] hwmon, fam15h_power: add ptsc counter value for accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 12/15] hwmon, fam15h_power: introduce a cpu accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 06/15] hwmon, fam15h_power: add documentation for new processors support
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 15/15] MAINTAINERS: change the maintainer of fam15h_power driver
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 10/15] hwmon, fam15h_power: add compute unit accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 09/15] x86, amd: add accessor for number of cores per compute unit
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 04/15] hwmon, fam15h_power: update running_avg_capture bit field to 28
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 01/15] hwmon, fam15h_power: add support for AMD Carrizo
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 08/15] hwmon, fam15h_power: add max compute unit accumulated power
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 07/15] hwmon, fam15h_power: add ratio of Tsample to the PTSC period
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 05/15] hwmon, fam15h_power: enable power1_input on AMD Carrizo
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 03/15] hwmon, fam15h_power: refactor attributes for dynamically added
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 02/15] hwmon, fam15h_power: rename fam15h_power_is_internal_node0 function
  • From: Huang Rui <ray.huang@xxxxxxx>
• [PATCH 00/15] hwmon, fam15h_power: introduce an accumulated power reporting algorithm
  • From: Huang Rui <ray.huang@xxxxxxx>
• Re: [hwmon:watchdog-next 25/25] drivers/watchdog/txx9wdt.c:134:20: error: 'pdev' undeclared
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [hwmon:watchdog-next 25/25] drivers/watchdog/txx9wdt.c:134:20: error: 'pdev' undeclared
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: ASRock AM1H-ITX
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Devices wiki page links are all wrong
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Dustin Byford <dustin@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [hwmon:hwmon-staging 46/47] drivers/hwmon/pmbus/lm25066.c:22:27: fatal error: linux/bitmask.h: No such file or directory
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: Create SoC thermal zone for Juno
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: Create SoC thermal zone for Juno
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• Re: [RFC] i2c: Revert back to old device naming for ACPI enumerated I2C slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• fancontrol doesn't restart on resume from suspend or hibernation (with solution)
  • From: tarqui <tarqui@xxxxxxxx>
• Re: NCT6793D
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• NCT6793D
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: The Code Crashes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: The Code Crashes
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: The Code Crashes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/2] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• [PATCH 2/2] hwmon: The Code Crashes
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [PATCH] add Enermax DigiFanless HID/hwmon driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [RFC 0/1] i2c: acpi: revert setting a "stable" device name
  • From: Dustin Byford <dustin@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• [patch] thermal: underflow bug in imx_set_trip_temp()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Devices wiki page links are all wrong
  • From: Антон Кочков <anton.kochkov@xxxxxxxxx>
• [PATCH 1/4] hwmon: (pmbus) Use BIT macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/4] hwmon: (ltc2978) Add polling for chips requiring it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] hwmon: (ltc2978) Add support for LTM4675
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/4] hwmon: (pmbus) Enable PEC if the controller supports it
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [hwmon:watchdog-next 25/25] drivers/watchdog/txx9wdt.c:134:20: error: 'pdev' undeclared
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH] add Enermax DigiFanless HID/hwmon driver
  • From: Frank Schaefer <kelledin@xxxxxxxxx>
• Re: [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• ASRock AM1H-ITX
  • From: descart avel <descartavel.1@xxxxxxxxx>
• [PATCH 8/8] hwmon: (ltc2978) Add support for LTC3886
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 7/8] hwmon: (ltc2978) Add support for LTC2980 and LTM2987
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 5/8] hwmon: (ltc2978) Use correct ID mask to detect all chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/8] hwmon: (ltc2978) Introduce feature flags
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/8] hwmon: (ltc2978) Introduce helper functions for min and max values
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 1/8] hwmon: (ltc2978) Add support for LTC2975
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/8] hwmon: (pmbus) Convert command register definitions to enum
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 6/8] hwmon: (ltc2978) Add missing chip IDs for LTC2978 and LTC3882
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• Re: [RFC 0/1] i2c: acpi: revert setting a "stable" device name
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] Support for Enermax DigiFanless 550W PSU
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Support for Enermax DigiFanless 550W PSU
  • From: Frank Schaefer <kelledin@xxxxxxxxx>
• Re: [PATCH] Support for Enermax DigiFanless 550W PSU
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] Support for Enermax DigiFanless 550W PSU
  • From: Frank Schaefer <kelledin@xxxxxxxxx>
• Re: [RFC 0/1] i2c: acpi: revert setting a "stable" device name
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC 0/1] i2c: acpi: revert setting a "stable" device name
  • From: Dustin Byford <dustin@xxxxxxxxxxxxxxxxxxx>
• [RFC 1/1] i2c: acpi: revert setting a "stable" device name
  • From: Dustin Byford <dustin@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: Create SoC thermal zone for Juno
  • From: Punit Agrawal <punit.agrawal@xxxxxxx>
• [PATCH v2 2/4] hwmon: (ltc2978) Add support for LTC3882
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 4/4] hwmon: (ltc2978) Add support for LTC3887
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/4] hwmon: (ltc2978) Move code to read chip ID into separate function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 3/4] hwmon: (ltc2978) Add additional chip IDs for LTM4676 and LTM4676A
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 10/10] arm64: dts: Create SoC thermal zone for Juno
  • From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
• [PATCH] pwmconfig checks for stable readings instead of waiting 5 secs
  • From: Nicolas Roy-Renaud <victoiredupeuple@xxxxxxxxxxx>
• [PATCH] pwmconfig checks for stable readings instead of waiting 5 secs
  • From: Nicolas Roy-Renaud <victoiredupeuple@xxxxxxxxxxx>
• Re: [PATCH] hwmon:change sht15_reverse()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] hwmon: Driver for Maxim MAX31790
  • From: Il Han <corone.il.han@xxxxxxxxx>
• [PATCH] hwmon:change sht15_reverse()
  • From: yalin wang <yalin.wang2010@xxxxxxxxx>
• Re: [PATCH] sensors-detect: restrict Super I/O probing to x86
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] mention sensors-detect(8) in sensors(1)
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] hwmon: (pmbus) Add device IDs for TPS544{B, C}2{0, 5}
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] mention sensors-detect(8) in sensors(1)
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH] sensors-detect: restrict Super I/O probing to x86
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: move client binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] rtc: bq32k: move binding docs to proper place
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/4] hwmon: max6697: move binding docs to proper place
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] hwmon: ina209: move binding docs to proper place
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] hwmon: ina2xx: move binding docs to proper place
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] hwmon: ina209: move binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/4] hwmon: max6697: move binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/4] rtc: bq32k: move binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/4] i2c: move client binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/4] hwmon: ina2xx: move binding docs to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: "Minimi, Phillip A" <phillip.a.minimi@xxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: Phil Perry <phil@xxxxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: "Minimi, Phillip A" <phillip.a.minimi@xxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: "Minimi, Phillip A" <phillip.a.minimi@xxxxxxxx>
• [PATCH] hwmon: (pmbus) Add device IDs for TPS544{B, C}2{0, 5}
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH hwmon] watchdog: lpc18xx_wdt_get_timeleft() can be static
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [hwmon:watchdog-next 11/19] drivers/watchdog/lpc18xx_wdt.c:126:14: sparse: symbol 'lpc18xx_wdt_get_timeleft' was not declared. Should it be static?
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH hwmon] watchdog: lpc18xx_wdt_get_timeleft() can be static
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: EXTERNAL: Re: coretemp driver
  • From: "Minimi, Phillip A" <phillip.a.minimi@xxxxxxxx>