NCT6792 and NCT6793 are mostly register compatible to NCT6791, but
temperature sources are different and difficult to manage with a single
temperature label array. Introduce separate temperature label arrays
for those chips to reflect the differences.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/nct6775.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 82 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 724401a368f7..d7ebdf8651f5 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -565,6 +565,76 @@ static const u16 NCT6792_REG_TEMP_MON[] = {
static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
+static const char *const nct6792_temp_label[] = {
+ "",
+ "SYSTIN",
+ "CPUTIN",
+ "AUXTIN0",
+ "AUXTIN1",
+ "AUXTIN2",
+ "AUXTIN3",
+ "",
+ "SMBUSMASTER 0",
+ "SMBUSMASTER 1",
+ "SMBUSMASTER 2",
+ "SMBUSMASTER 3",
+ "SMBUSMASTER 4",
+ "SMBUSMASTER 5",
+ "SMBUSMASTER 6",
+ "SMBUSMASTER 7",
+ "PECI Agent 0",
+ "PECI Agent 1",
+ "PCH_CHIP_CPU_MAX_TEMP",
+ "PCH_CHIP_TEMP",
+ "PCH_CPU_TEMP",
+ "PCH_MCH_TEMP",
+ "PCH_DIM0_TEMP",
+ "PCH_DIM1_TEMP",
+ "PCH_DIM2_TEMP",
+ "PCH_DIM3_TEMP",
+ "BYTE_TEMP",
+ "PECI Agent 0 Calibration",
+ "PECI Agent 1 Calibration",
+ "",
+ "",
+ "Virtual_TEMP"
+};
+
+static const char *const nct6793_temp_label[] = {
+ "",
+ "SYSTIN",
+ "CPUTIN",
+ "AUXTIN0",
+ "AUXTIN1",
+ "AUXTIN2",
+ "AUXTIN3",
+ "",
+ "SMBUSMASTER 0",
+ "SMBUSMASTER 1",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PECI Agent 0",
+ "PECI Agent 1",
+ "PCH_CHIP_CPU_MAX_TEMP",
+ "PCH_CHIP_TEMP",
+ "PCH_CPU_TEMP",
+ "PCH_MCH_TEMP",
+ "Agent0 Dimm0 ",
+ "Agent0 Dimm1",
+ "Agent1 Dimm0",
+ "Agent1 Dimm1",
+ "BYTE_TEMP0",
+ "BYTE_TEMP1",
+ "PECI Agent 0 Calibration",
+ "PECI Agent 1 Calibration",
+ "",
+ "Virtual_TEMP"
+};
+
/* NCT6102D/NCT6106D specific data */
#define NCT6106_REG_VBAT 0x318
@@ -3690,7 +3760,18 @@ static int nct6775_probe(struct platform_device *pdev)
data->tolerance_mask = 0x07;
data->speed_tolerance_limit = 63;
- data->temp_label = nct6779_temp_label;
+ switch (data->kind) {
+ default:
+ case nct6791:
+ data->temp_label = nct6779_temp_label;
+ break;
+ case nct6792:
+ data->temp_label = nct6792_temp_label;
+ break;
+ case nct6793:
+ data->temp_label = nct6793_temp_label;
+ break;
+ }
data->temp_label_num = NCT6791_NUM_LABELS;
data->REG_CONFIG = NCT6775_REG_CONFIG;
--
2.1.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
