Hi Marc, [auto build test WARNING on hwmon/hwmon-next -- if it's inappropriate base, please suggest rules for selecting the more suitable base] url: https://github.com/0day-ci/linux/commits/Marc-Titinger/hwmon-ina2xx-port-to-using-remap-improve-bandwidth/20151024-001809 config: openrisc-allyesconfig (attached as .config) reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=openrisc All warnings (new ones prefixed by >>): drivers/hwmon/ina2xx.c: In function 'ina2xx_probe': >> drivers/hwmon/ina2xx.c:456:3: warning: format '%li' expects type 'long int', but argument 3 has type 'u32' vim +456 drivers/hwmon/ina2xx.c 440 /* Set config according to device type. */ 441 data->config = &ina2xx_config[id->driver_data]; 442 data->client = client; 443 444 /* Check for shunt resistor value. 445 * Give precedence to device tree over must-recompile. 446 */ 447 if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) { 448 pdata = dev_get_platdata(dev); 449 if (pdata) 450 val = pdata->shunt_uohms; 451 else 452 val = INA2XX_RSHUNT_DEFAULT; 453 } 454 455 if (val <= 0 || val > data->config->calibration_factor) { > 456 dev_err(dev, "Invalid shunt resistor value %li", val); 457 return -ENODEV; 458 } 459 data->rshunt = val; 460 461 /* Write config to chip, and calibrate */ 462 ret = ina2xx_init(data); 463 if (ret) { 464 dev_err(dev, "error configuring the device.\n"); --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
Attachment:
.config.gz
Description: Binary data
_______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
