From: Guenter Roeck <linux@xxxxxxxxxxxx> IT8620E supports three additional voltage sensors. Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/hwmon/it87.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index aa3ec50527a3..96876755376c 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -219,7 +219,12 @@ static bool fix_pwm_polarity; #define IT87_REG_FAN_DIV 0x0b #define IT87_REG_FAN_16BIT 0x0c -/* Monitors: 9 voltage (0 to 7, battery), 6 temp (1 to 6), 3 fan (1 to 3) */ +/* + * Monitors: + * - up to 13 voltage (0 to 7, battery, avcc, 10 to 12) + * - up to 6 temp (1 to 6) + * - up to 6 fan (1 to 6) + */ static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c }; static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e }; @@ -233,7 +238,7 @@ static const u8 IT87_REG_PWM[] = { 0x15, 0x16, 0x17, 0x7f, 0xa7, 0xaf }; static const u8 IT87_REG_PWM_DUTY[] = { 0x63, 0x6b, 0x73, 0x7b, 0xa3, 0xab }; static const u8 IT87_REG_VIN[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, - 0x27, 0x28, 0x2f }; + 0x27, 0x28, 0x2f, 0x2c, 0x2d, 0x2e }; #define IT87_REG_TEMP(nr) (0x29 + (nr)) @@ -478,7 +483,7 @@ struct it87_data { u16 in_scaled; /* Internal voltage sensors are scaled */ u16 in_internal; /* Bitfield, internal sensors (for labels) */ u16 has_in; /* Bitfield, voltage sensors enabled */ - u8 in[10][3]; /* [nr][0]=in, [1]=min, [2]=max */ + u8 in[13][3]; /* [nr][0]=in, [1]=min, [2]=max */ u8 has_fan; /* Bitfield, fans enabled */ u16 fan[6][2]; /* Register values, [nr][0]=fan, [1]=min */ u8 has_temp; /* Bitfield, temp sensors enabled */ @@ -861,6 +866,9 @@ static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in, static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0); static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0); +static SENSOR_DEVICE_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 10, 0); +static SENSOR_DEVICE_ATTR_2(in11_input, S_IRUGO, show_in, NULL, 11, 0); +static SENSOR_DEVICE_ATTR_2(in12_input, S_IRUGO, show_in, NULL, 12, 0); /* Up to 6 temperatures */ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, @@ -1764,7 +1772,7 @@ static umode_t it87_in_is_visible(struct kobject *kobj, int i = index / 5; /* voltage index */ int a = index % 5; /* attribute index */ - if (index >= 40) { /* in8, in9 only have input attributes */ + if (index >= 40) { /* in8 and higher only have input attributes */ i = index - 40 + 8; a = 0; } @@ -1828,8 +1836,10 @@ static struct attribute *it87_attributes_in[] = { &sensor_dev_attr_in7_beep.dev_attr.attr, /* 39 */ &sensor_dev_attr_in8_input.dev_attr.attr, /* 40 */ - &sensor_dev_attr_in9_input.dev_attr.attr, /* 41 */ + &sensor_dev_attr_in10_input.dev_attr.attr, /* 41 */ + &sensor_dev_attr_in11_input.dev_attr.attr, /* 41 */ + &sensor_dev_attr_in12_input.dev_attr.attr, /* 41 */ }; static const struct attribute_group it87_group_in = { @@ -2738,12 +2748,21 @@ static int it87_probe(struct platform_device *pdev) if (has_six_temp(data)) { u8 reg = it87_read_value(data, IT87_REG_TEMP456_ENABLE); + /* Check for additional temperature sensors */ if ((reg & 0x03) >= 0x02) data->has_temp |= (1 << 3); if (((reg >> 2) & 0x03) >= 0x02) data->has_temp |= (1 << 4); if (((reg >> 4) & 0x03) >= 0x02) data->has_temp |= (1 << 5); + + /* Check for additional voltage sensors */ + if ((reg & 0x03) == 0x01) + data->has_in |= (1 << 10); + if (((reg >> 2) & 0x03) == 0x01) + data->has_in |= (1 << 11); + if (((reg >> 4) & 0x03) == 0x01) + data->has_in |= (1 << 12); } data->has_beep = !!sio_data->beep_pin; -- 2.1.4 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors