Hello,
Sensors gives just the basics:
coretemp-isa-0001
Adapter: ISA adapter
Package id 1: +18.0°C (high = +80.0°C, crit = +90.0°C)
Core 0: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 1: +12.0°C (high = +80.0°C, crit = +90.0°C)
Core 2: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 3: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 4: +12.0°C (high = +80.0°C, crit = +90.0°C)
Core 5: +11.0°C (high = +80.0°C, crit = +90.0°C)
nouveau-pci-0200
Adapter: PCI adapter
GPU core: +0.90 V (min = +0.85 V, max = +1.05 V)
temp1: +47.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
nct7904-i2c-12-2d
Adapter: SMBus I801 adapter at 0580
in1: +0.95 V
in2: +1.04 V
in3: +1.49 V
in4: +1.23 V
in5: +1.26 V
in6: +0.30 V
in7: +1.81 V
in8: +0.47 V
in9: +1.79 V
in10: +1.79 V
in11: +1.20 V
in12: +1.20 V
in13: +1.20 V
in14: +1.20 V
in15: +3.22 V
in16: +3.20 V
in20: +3.38 V
fan1: 2343 RPM
fan2: 2368 RPM
fan3: 2481 RPM
fan4: 1288 RPM
fan5: 0 RPM
fan6: 2389 RPM
fan7: 1280 RPM
fan8: 0 RPM
temp1: +30.8°C
temp2: +17.6°C
temp3: +17.8°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +17.0°C (high = +80.0°C, crit = +90.0°C)
Core 0: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 1: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 2: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 3: +12.0°C (high = +80.0°C, crit = +90.0°C)
Core 4: +11.0°C (high = +80.0°C, crit = +90.0°C)
Core 5: +12.0°C (high = +80.0°C, crit = +90.0°C)
and cat /sys/class/hwmon/*/name gives
nouveau
coretemp
coretemp
nct7904
lspci | grep -i eth gives
03:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10G X550T (rev 01)
03:00.1 Ethernet controller: Intel Corporation Ethernet Controller 10G X550T (rev 01)
05:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
06:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
from which I get with
find /sys | grep drivers.*03:00.1
/sys/bus/pci/drivers/ixgbe/0000:03:00.1
--
Mikko
On 1/23/2019 2:54 PM, Ondřej Lysoněk wrote:
Hi,
On 23. 01. 19 13:15, Mikko Laaksonen wrote:
Hello,
I would like to know how I can go about adding support for an Intel
X550-T2 PCI-E network card in lm_sensors. The card comes with a number
of sensors, including temperature, and a 1,200-page reference manual.
sensors-detect does not recognize the card off the shelf.
Detection support in sensors-detect doesn't mean much, so I'd first
focus on whether data from the sensors is exported by the driver.
Looking at the ixgbe driver (am I looking at the correct driver?), it
does register a hwmon device, so the data could be available. Let's
verify that - what's the output of the 'sensors' program and the output
of 'cat /sys/class/hwmon/*/name'?
Ondra
