On Tue, Mar 29, 2016 at 09:03:37PM +0200, Alexander Koch wrote:
> The ADC128D818 offers four different chip operation modes which vary in the
> number and measurement types of the available input signals (see datasheet
> sec. 8.4.1).
>
> The current version of the driver only supports the default chip operation mode
> (mode 0), providing seven analog values and a temperature reading.
>
> This patch series adds support for operation mode 1 (eight analog inputs but no
> temperature), selectable through the device tree attribute 'mode':
>
> adc1: adc128d818@1d {
> compatible = "ti,adc128d818";
> reg = <0x1d>;
> mode = /bits/ 8 <1>;
> };
>
> The changes are transparent as 'mode' defaults to mode 0 which yields the
> previous behaviour. Code has been tested on real hardware using an evaluation
> board.
>
> Alexander Koch (2):
> hwmon: adc128d818: Implement chip mode selection
> hwmon: adc128d818: Implement operation mode 1
>
> drivers/hwmon/adc128d818.c | 113 +++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 95 insertions(+), 18 deletions(-)
>
Please send follow-up patches to linux-hwmon@xxxxxxxxxxxxxxx.
Thanks,
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
