* Huang Rui <ray.huang@xxxxxxx> wrote:
> This patch adds a member in fam15h_power_data which specifies the
> compute unit accumulated power.
>
> Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
> ---
> drivers/hwmon/fam15h_power.c | 31 +++++++++++++++++++++++++++----
> 1 file changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
> index fdfa18e..f5ff48f 100644
> --- a/drivers/hwmon/fam15h_power.c
> +++ b/drivers/hwmon/fam15h_power.c
> @@ -43,7 +43,9 @@ MODULE_LICENSE("GPL");
> #define REG_TDP_LIMIT3 0xe8
>
> #define FAM15H_MIN_POWER_GROUPS 2
> +#define MAX_CUS 8
>
> +#define MSR_F15H_CU_PWR_ACCUMULATOR 0xc001007a
> #define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
>
> struct fam15h_power_data {
> @@ -54,6 +56,8 @@ struct fam15h_power_data {
> unsigned int cpu_pwr_sample_ratio;
> /* maximum accumulated power of a compute unit */
> u64 max_cu_acc_power;
> + /* accumulated power of the compute units */
> + u64 cu_acc_power[MAX_CUS];
> };
>
> static ssize_t show_power(struct device *dev,
> @@ -207,6 +211,7 @@ static int fam15h_power_resume(struct pci_dev *pdev)
> static int fam15h_power_init_data(struct pci_dev *f4,
> struct fam15h_power_data *data)
> {
> + int cu_num, cores_per_cu, cpu, cu;
> u32 val, eax, ebx, ecx, edx;
> u64 tmp;
>
> @@ -249,6 +254,21 @@ static int fam15h_power_init_data(struct pci_dev *f4,
>
> data->max_cu_acc_power = tmp;
>
> + cores_per_cu = amd_get_cores_per_cu();
> + cu_num = boot_cpu_data.x86_max_cores / cores_per_cu;
> +
> + WARN_ON_ONCE(cu_num > MAX_CUS);
> +
> + for (cpu = 0; cpu < cu_num * cores_per_cu; cpu += cores_per_cu) {
so 'cu_num * cores_per_cu' is really a roundabout way to say
boot_cpu_data.x86_max_cores?
> + cu = cpu / cores_per_cu;
> + if (rdmsrl_safe_on_cpu(cpu, MSR_F15H_CU_PWR_ACCUMULATOR,
> + &data->cu_acc_power[cu])) {
> + pr_err("Failed to read compute unit power accumulator MSR on core%d\n",
> + cpu);
Please don't break printk lines mid-line - ignore checkpatch in this case.
Also, the message talks about 'core', while a CPU ID is printed.
Thanks,
Ingo
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
