From: Guenter Roeck <linux@xxxxxxxxxxxx>
Cleanup only, no functional change.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/it87.c | 761 +++++++++++++++++++++++++--------------------------
1 file changed, 376 insertions(+), 385 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f877cc98b2fd..4b38ecb91959 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -603,23 +603,160 @@ static const unsigned int pwm_freq[8] = {
750000,
};
-static int it87_probe(struct platform_device *pdev);
-static int it87_remove(struct platform_device *pdev);
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static int it87_read_value(struct it87_data *data, u8 reg)
+{
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ return inb_p(data->addr + IT87_DATA_REG_OFFSET);
+}
+
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
+{
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
+}
+
+static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
+{
+ data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]);
+ if (has_newer_autopwm(data)) {
+ data->pwm_temp_map[nr] = (data->pwm_ctrl[nr] & 0x03) +
+ nr < 3 ? 0 : 3;
+ data->pwm_duty[nr] = it87_read_value(data,
+ IT87_REG_PWM_DUTY[nr]);
+ } else {
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ else /* Manual mode */
+ data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ }
-static int it87_read_value(struct it87_data *data, u8 reg);
-static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
-static struct it87_data *it87_update_device(struct device *dev);
-static int it87_check_pwm(struct device *dev);
-static void it87_init_device(struct platform_device *pdev);
+ if (has_old_autopwm(data)) {
+ int i;
+ for (i = 0; i < 5 ; i++)
+ data->auto_temp[nr][i] = it87_read_value(data,
+ IT87_REG_AUTO_TEMP(nr, i));
+ for (i = 0; i < 3 ; i++)
+ data->auto_pwm[nr][i] = it87_read_value(data,
+ IT87_REG_AUTO_PWM(nr, i));
+ }
+}
-static struct platform_driver it87_driver = {
- .driver = {
- .name = DRVNAME,
- },
- .probe = it87_probe,
- .remove = it87_remove,
-};
+static struct it87_data *it87_update_device(struct device *dev)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ if (update_vbat) {
+ /*
+ * Cleared after each update, so reenable. Value
+ * returned by this read will be previous value
+ */
+ it87_write_value(data, IT87_REG_CONFIG,
+ it87_read_value(data, IT87_REG_CONFIG) | 0x40);
+ }
+ for (i = 0; i <= 7; i++) {
+ data->in[i][0] =
+ it87_read_value(data, IT87_REG_VIN(i));
+ data->in[i][1] =
+ it87_read_value(data, IT87_REG_VIN_MIN(i));
+ data->in[i][2] =
+ it87_read_value(data, IT87_REG_VIN_MAX(i));
+ }
+ /* in8 (battery) has no limit registers */
+ data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8));
+ if (has_avcc3(data))
+ data->in[9][0] = it87_read_value(data, IT87_REG_AVCC3);
+
+ for (i = 0; i < 6; i++) {
+ /* Skip disabled fans */
+ if (!(data->has_fan & (1 << i)))
+ continue;
+
+ data->fan[i][1] =
+ it87_read_value(data, IT87_REG_FAN_MIN[i]);
+ data->fan[i][0] = it87_read_value(data,
+ IT87_REG_FAN[i]);
+ /* Add high byte if in 16-bit mode */
+ if (has_16bit_fans(data)) {
+ data->fan[i][0] |= it87_read_value(data,
+ IT87_REG_FANX[i]) << 8;
+ data->fan[i][1] |= it87_read_value(data,
+ IT87_REG_FANX_MIN[i]) << 8;
+ }
+ }
+ for (i = 0; i < 3; i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ data->temp[i][0] =
+ it87_read_value(data, IT87_REG_TEMP(i));
+ data->temp[i][1] =
+ it87_read_value(data, IT87_REG_TEMP_LOW(i));
+ data->temp[i][2] =
+ it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+ if (has_temp_offset(data))
+ data->temp[i][3] =
+ it87_read_value(data,
+ IT87_REG_TEMP_OFFSET[i]);
+ }
+
+ /* Newer chips don't have clock dividers */
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
+ i = it87_read_value(data, IT87_REG_FAN_DIV);
+ data->fan_div[0] = i & 0x07;
+ data->fan_div[1] = (i >> 3) & 0x07;
+ data->fan_div[2] = (i & 0x40) ? 3 : 1;
+ }
+
+ data->alarms =
+ it87_read_value(data, IT87_REG_ALARM1) |
+ (it87_read_value(data, IT87_REG_ALARM2) << 8) |
+ (it87_read_value(data, IT87_REG_ALARM3) << 16);
+ data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+
+ data->fan_main_ctrl = it87_read_value(data,
+ IT87_REG_FAN_MAIN_CTRL);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+ for (i = 0; i < 6; i++)
+ it87_update_pwm_ctrl(data, i);
+
+ data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+ data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
+ /*
+ * The IT8705F does not have VID capability.
+ * The IT8718F and later don't use IT87_REG_VID for the
+ * same purpose.
+ */
+ if (data->type == it8712 || data->type == it8716) {
+ data->vid = it87_read_value(data, IT87_REG_VID);
+ /*
+ * The older IT8712F revisions had only 5 VID pins,
+ * but we assume it is always safe to read 6 bits.
+ */
+ data->vid &= 0x3f;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -2341,64 +2478,233 @@ static void it87_remove_files(struct device *dev)
sysfs_remove_group(&dev->kobj, &it87_group_label);
}
-static int it87_probe(struct platform_device *pdev)
+/* Called when we have found a new IT87. */
+static void it87_init_device(struct platform_device *pdev)
{
- struct it87_data *data;
- struct resource *res;
- struct device *dev = &pdev->dev;
- struct it87_sio_data *sio_data = dev_get_platdata(dev);
- int err = 0, i;
- int enable_pwm_interface;
- int fan_beep_need_rw;
+ struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
+ struct it87_data *data = platform_get_drvdata(pdev);
+ int tmp, i;
+ u8 mask;
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
- DRVNAME)) {
- dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
- (unsigned long)res->start,
- (unsigned long)(res->start + IT87_EC_EXTENT - 1));
- return -EBUSY;
+ /*
+ * For each PWM channel:
+ * - If it is in automatic mode, setting to manual mode should set
+ * the fan to full speed by default.
+ * - If it is in manual mode, we need a mapping to temperature
+ * channels to use when later setting to automatic mode later.
+ * Use a 1:1 mapping by default (we are clueless.)
+ * In both cases, the value can (and should) be changed by the user
+ * prior to switching to a different mode.
+ * Note that this is no longer needed for the IT8721F and later, as
+ * these have separate registers for the temperature mapping and the
+ * manual duty cycle.
+ */
+ for (i = 0; i < 3; i++) {
+ data->pwm_temp_map[i] = i;
+ data->pwm_duty[i] = 0x7f; /* Full speed */
+ data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
}
- data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->addr = res->start;
- data->type = sio_data->type;
- data->features = it87_devices[sio_data->type].features;
- data->peci_mask = it87_devices[sio_data->type].peci_mask;
- data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
- data->name = it87_devices[sio_data->type].name;
/*
- * IT8705F Datasheet 0.4.1, 3h == Version G.
- * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
- * These are the first revisions with 16-bit tachometer support.
+ * Some chips seem to have default value 0xff for all limit
+ * registers. For low voltage limits it makes no sense and triggers
+ * alarms, so change to 0 instead. For high temperature limits, it
+ * means -1 degree C, which surprisingly doesn't trigger an alarm,
+ * but is still confusing, so change to 127 degrees C.
*/
- switch (data->type) {
- case it87:
- if (sio_data->revision >= 0x03) {
- data->features &= ~FEAT_OLD_AUTOPWM;
- data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
- }
- break;
- case it8712:
- if (sio_data->revision >= 0x08) {
- data->features &= ~FEAT_OLD_AUTOPWM;
- data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
- FEAT_FIVE_FANS;
- }
- break;
- default:
- break;
+ for (i = 0; i < 8; i++) {
+ tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
+ if (tmp == 0xff)
+ it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
+ }
+ for (i = 0; i < 3; i++) {
+ tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+ if (tmp == 0xff)
+ it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
- /* Now, we do the remaining detection. */
- if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
- || it87_read_value(data, IT87_REG_CHIPID) != 0x90)
- return -ENODEV;
+ /*
+ * Temperature channels are not forcibly enabled, as they can be
+ * set to two different sensor types and we can't guess which one
+ * is correct for a given system. These channels can be enabled at
+ * run-time through the temp{1-3}_type sysfs accessors if needed.
+ */
- platform_set_drvdata(pdev, data);
+ /* Check if voltage monitors are reset manually or by some reason */
+ tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
+ if ((tmp & 0xff) == 0) {
+ /* Enable all voltage monitors */
+ it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
+ }
+
+ /* Check if tachometers are reset manually or by some reason */
+ mask = 0x70 & ~(sio_data->skip_fan << 4);
+ data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
+ if ((data->fan_main_ctrl & mask) == 0) {
+ /* Enable all fan tachometers */
+ data->fan_main_ctrl |= mask;
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+ data->fan_main_ctrl);
+ }
+ data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
+
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+
+ /* Set tachometers to 16-bit mode if needed */
+ if (has_fan16_config(data)) {
+ if (~tmp & 0x07 & data->has_fan) {
+ dev_dbg(&pdev->dev,
+ "Setting fan1-3 to 16-bit mode\n");
+ it87_write_value(data, IT87_REG_FAN_16BIT,
+ tmp | 0x07);
+ }
+ }
+
+ /* Check for additional fans */
+ if (has_five_fans(data)) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ if (has_six_fans(data) && (tmp & (1 << 2)))
+ data->has_fan |= (1 << 5); /* fan6 enabled */
+ }
+
+ /* Fan input pins may be used for alternative functions */
+ data->has_fan &= ~sio_data->skip_fan;
+
+ /* Check if pwm5, pwm6 are enabled */
+ if (has_six_pwm(data)) {
+ /* The following code may be IT8620E specific */
+ tmp = it87_read_value(data, IT87_REG_FAN_DIV);
+ if ((tmp & 0xc0) == 0xc0)
+ sio_data->skip_pwm |= (1 << 4);
+ if (!(tmp & (1 << 3)))
+ sio_data->skip_pwm |= (1 << 5);
+ }
+
+ /* Start monitoring */
+ it87_write_value(data, IT87_REG_CONFIG,
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
+ | (update_vbat ? 0x41 : 0x01));
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct device *dev)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ /*
+ * Some BIOSes fail to correctly configure the IT87 fans. All fans off
+ * and polarity set to active low is sign that this is the case so we
+ * disable pwm control to protect the user.
+ */
+ int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+
+ if ((tmp & 0x87) == 0) {
+ if (fix_pwm_polarity) {
+ /*
+ * The user asks us to attempt a chip reconfiguration.
+ * This means switching to active high polarity and
+ * inverting all fan speed values.
+ */
+ int i;
+ u8 pwm[3];
+
+ for (i = 0; i < 3; i++)
+ pwm[i] = it87_read_value(data,
+ IT87_REG_PWM[i]);
+
+ /*
+ * If any fan is in automatic pwm mode, the polarity
+ * might be correct, as suspicious as it seems, so we
+ * better don't change anything (but still disable the
+ * PWM interface).
+ */
+ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+ dev_info(dev,
+ "Reconfiguring PWM to active high polarity\n");
+ it87_write_value(data, IT87_REG_FAN_CTL,
+ tmp | 0x87);
+ for (i = 0; i < 3; i++)
+ it87_write_value(data,
+ IT87_REG_PWM[i],
+ 0x7f & ~pwm[i]);
+ return 1;
+ }
+
+ dev_info(dev,
+ "PWM configuration is too broken to be fixed\n");
+ }
+
+ dev_info(dev,
+ "Detected broken BIOS defaults, disabling PWM interface\n");
+ return 0;
+ } else if (fix_pwm_polarity) {
+ dev_info(dev,
+ "PWM configuration looks sane, won't touch\n");
+ }
+
+ return 1;
+}
+
+static int it87_probe(struct platform_device *pdev)
+{
+ struct it87_data *data;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct it87_sio_data *sio_data = dev_get_platdata(dev);
+ int err = 0, i;
+ int enable_pwm_interface;
+ int fan_beep_need_rw;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
+ DRVNAME)) {
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)(res->start + IT87_EC_EXTENT - 1));
+ return -EBUSY;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->addr = res->start;
+ data->type = sio_data->type;
+ data->features = it87_devices[sio_data->type].features;
+ data->peci_mask = it87_devices[sio_data->type].peci_mask;
+ data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
+ data->name = it87_devices[sio_data->type].name;
+ /*
+ * IT8705F Datasheet 0.4.1, 3h == Version G.
+ * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+ * These are the first revisions with 16-bit tachometer support.
+ */
+ switch (data->type) {
+ case it87:
+ if (sio_data->revision >= 0x03) {
+ data->features &= ~FEAT_OLD_AUTOPWM;
+ data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
+ }
+ break;
+ case it8712:
+ if (sio_data->revision >= 0x08) {
+ data->features &= ~FEAT_OLD_AUTOPWM;
+ data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
+ FEAT_FIVE_FANS;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Now, we do the remaining detection. */
+ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(data, IT87_REG_CHIPID) != 0x90)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, data);
mutex_init(&data->update_lock);
@@ -2570,328 +2876,13 @@ static int it87_remove(struct platform_device *pdev)
return 0;
}
-/*
- * Must be called with data->update_lock held, except during initialization.
- * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
- * would slow down the IT87 access and should not be necessary.
- */
-static int it87_read_value(struct it87_data *data, u8 reg)
-{
- outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
- return inb_p(data->addr + IT87_DATA_REG_OFFSET);
-}
-
-/*
- * Must be called with data->update_lock held, except during initialization.
- * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
- * would slow down the IT87 access and should not be necessary.
- */
-static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
-{
- outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
- outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
-}
-
-/* Return 1 if and only if the PWM interface is safe to use */
-static int it87_check_pwm(struct device *dev)
-{
- struct it87_data *data = dev_get_drvdata(dev);
- /*
- * Some BIOSes fail to correctly configure the IT87 fans. All fans off
- * and polarity set to active low is sign that this is the case so we
- * disable pwm control to protect the user.
- */
- int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
- if ((tmp & 0x87) == 0) {
- if (fix_pwm_polarity) {
- /*
- * The user asks us to attempt a chip reconfiguration.
- * This means switching to active high polarity and
- * inverting all fan speed values.
- */
- int i;
- u8 pwm[3];
-
- for (i = 0; i < 3; i++)
- pwm[i] = it87_read_value(data,
- IT87_REG_PWM[i]);
-
- /*
- * If any fan is in automatic pwm mode, the polarity
- * might be correct, as suspicious as it seems, so we
- * better don't change anything (but still disable the
- * PWM interface).
- */
- if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
- dev_info(dev,
- "Reconfiguring PWM to active high polarity\n");
- it87_write_value(data, IT87_REG_FAN_CTL,
- tmp | 0x87);
- for (i = 0; i < 3; i++)
- it87_write_value(data,
- IT87_REG_PWM[i],
- 0x7f & ~pwm[i]);
- return 1;
- }
-
- dev_info(dev,
- "PWM configuration is too broken to be fixed\n");
- }
-
- dev_info(dev,
- "Detected broken BIOS defaults, disabling PWM interface\n");
- return 0;
- } else if (fix_pwm_polarity) {
- dev_info(dev,
- "PWM configuration looks sane, won't touch\n");
- }
-
- return 1;
-}
-
-/* Called when we have found a new IT87. */
-static void it87_init_device(struct platform_device *pdev)
-{
- struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
- struct it87_data *data = platform_get_drvdata(pdev);
- int tmp, i;
- u8 mask;
-
- /*
- * For each PWM channel:
- * - If it is in automatic mode, setting to manual mode should set
- * the fan to full speed by default.
- * - If it is in manual mode, we need a mapping to temperature
- * channels to use when later setting to automatic mode later.
- * Use a 1:1 mapping by default (we are clueless.)
- * In both cases, the value can (and should) be changed by the user
- * prior to switching to a different mode.
- * Note that this is no longer needed for the IT8721F and later, as
- * these have separate registers for the temperature mapping and the
- * manual duty cycle.
- */
- for (i = 0; i < 3; i++) {
- data->pwm_temp_map[i] = i;
- data->pwm_duty[i] = 0x7f; /* Full speed */
- data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */
- }
-
- /*
- * Some chips seem to have default value 0xff for all limit
- * registers. For low voltage limits it makes no sense and triggers
- * alarms, so change to 0 instead. For high temperature limits, it
- * means -1 degree C, which surprisingly doesn't trigger an alarm,
- * but is still confusing, so change to 127 degrees C.
- */
- for (i = 0; i < 8; i++) {
- tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
- if (tmp == 0xff)
- it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
- }
- for (i = 0; i < 3; i++) {
- tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
- if (tmp == 0xff)
- it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
- }
-
- /*
- * Temperature channels are not forcibly enabled, as they can be
- * set to two different sensor types and we can't guess which one
- * is correct for a given system. These channels can be enabled at
- * run-time through the temp{1-3}_type sysfs accessors if needed.
- */
-
- /* Check if voltage monitors are reset manually or by some reason */
- tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
- if ((tmp & 0xff) == 0) {
- /* Enable all voltage monitors */
- it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
- }
-
- /* Check if tachometers are reset manually or by some reason */
- mask = 0x70 & ~(sio_data->skip_fan << 4);
- data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
- if ((data->fan_main_ctrl & mask) == 0) {
- /* Enable all fan tachometers */
- data->fan_main_ctrl |= mask;
- it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
- data->fan_main_ctrl);
- }
- data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
-
- tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
-
- /* Set tachometers to 16-bit mode if needed */
- if (has_fan16_config(data)) {
- if (~tmp & 0x07 & data->has_fan) {
- dev_dbg(&pdev->dev,
- "Setting fan1-3 to 16-bit mode\n");
- it87_write_value(data, IT87_REG_FAN_16BIT,
- tmp | 0x07);
- }
- }
-
- /* Check for additional fans */
- if (has_five_fans(data)) {
- if (tmp & (1 << 4))
- data->has_fan |= (1 << 3); /* fan4 enabled */
- if (tmp & (1 << 5))
- data->has_fan |= (1 << 4); /* fan5 enabled */
- if (has_six_fans(data) && (tmp & (1 << 2)))
- data->has_fan |= (1 << 5); /* fan6 enabled */
- }
-
- /* Fan input pins may be used for alternative functions */
- data->has_fan &= ~sio_data->skip_fan;
-
- /* Check if pwm5, pwm6 are enabled */
- if (has_six_pwm(data)) {
- /* The following code may be IT8620E specific */
- tmp = it87_read_value(data, IT87_REG_FAN_DIV);
- if ((tmp & 0xc0) == 0xc0)
- sio_data->skip_pwm |= (1 << 4);
- if (!(tmp & (1 << 3)))
- sio_data->skip_pwm |= (1 << 5);
- }
-
- /* Start monitoring */
- it87_write_value(data, IT87_REG_CONFIG,
- (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
- | (update_vbat ? 0x41 : 0x01));
-}
-
-static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
-{
- data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]);
- if (has_newer_autopwm(data)) {
- data->pwm_temp_map[nr] = (data->pwm_ctrl[nr] & 0x03) +
- nr < 3 ? 0 : 3;
- data->pwm_duty[nr] = it87_read_value(data,
- IT87_REG_PWM_DUTY[nr]);
- } else {
- if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
- data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
- else /* Manual mode */
- data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
- }
-
- if (has_old_autopwm(data)) {
- int i;
-
- for (i = 0; i < 5 ; i++)
- data->auto_temp[nr][i] = it87_read_value(data,
- IT87_REG_AUTO_TEMP(nr, i));
- for (i = 0; i < 3 ; i++)
- data->auto_pwm[nr][i] = it87_read_value(data,
- IT87_REG_AUTO_PWM(nr, i));
- }
-}
-
-static struct it87_data *it87_update_device(struct device *dev)
-{
- struct it87_data *data = dev_get_drvdata(dev);
- int i;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
- || !data->valid) {
- if (update_vbat) {
- /*
- * Cleared after each update, so reenable. Value
- * returned by this read will be previous value
- */
- it87_write_value(data, IT87_REG_CONFIG,
- it87_read_value(data, IT87_REG_CONFIG) | 0x40);
- }
- for (i = 0; i <= 7; i++) {
- data->in[i][0] =
- it87_read_value(data, IT87_REG_VIN(i));
- data->in[i][1] =
- it87_read_value(data, IT87_REG_VIN_MIN(i));
- data->in[i][2] =
- it87_read_value(data, IT87_REG_VIN_MAX(i));
- }
- /* in8 (battery) has no limit registers */
- data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8));
- if (has_avcc3(data))
- data->in[9][0] = it87_read_value(data, IT87_REG_AVCC3);
-
- for (i = 0; i < 6; i++) {
- /* Skip disabled fans */
- if (!(data->has_fan & (1 << i)))
- continue;
-
- data->fan[i][1] =
- it87_read_value(data, IT87_REG_FAN_MIN[i]);
- data->fan[i][0] = it87_read_value(data,
- IT87_REG_FAN[i]);
- /* Add high byte if in 16-bit mode */
- if (has_16bit_fans(data)) {
- data->fan[i][0] |= it87_read_value(data,
- IT87_REG_FANX[i]) << 8;
- data->fan[i][1] |= it87_read_value(data,
- IT87_REG_FANX_MIN[i]) << 8;
- }
- }
- for (i = 0; i < 3; i++) {
- if (!(data->has_temp & (1 << i)))
- continue;
- data->temp[i][0] =
- it87_read_value(data, IT87_REG_TEMP(i));
- data->temp[i][1] =
- it87_read_value(data, IT87_REG_TEMP_LOW(i));
- data->temp[i][2] =
- it87_read_value(data, IT87_REG_TEMP_HIGH(i));
- if (has_temp_offset(data))
- data->temp[i][3] =
- it87_read_value(data,
- IT87_REG_TEMP_OFFSET[i]);
- }
-
- /* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
- i = it87_read_value(data, IT87_REG_FAN_DIV);
- data->fan_div[0] = i & 0x07;
- data->fan_div[1] = (i >> 3) & 0x07;
- data->fan_div[2] = (i & 0x40) ? 3 : 1;
- }
-
- data->alarms =
- it87_read_value(data, IT87_REG_ALARM1) |
- (it87_read_value(data, IT87_REG_ALARM2) << 8) |
- (it87_read_value(data, IT87_REG_ALARM3) << 16);
- data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
-
- data->fan_main_ctrl = it87_read_value(data,
- IT87_REG_FAN_MAIN_CTRL);
- data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
- for (i = 0; i < 6; i++)
- it87_update_pwm_ctrl(data, i);
-
- data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
- data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
- /*
- * The IT8705F does not have VID capability.
- * The IT8718F and later don't use IT87_REG_VID for the
- * same purpose.
- */
- if (data->type == it8712 || data->type == it8716) {
- data->vid = it87_read_value(data, IT87_REG_VID);
- /*
- * The older IT8712F revisions had only 5 VID pins,
- * but we assume it is always safe to read 6 bits.
- */
- data->vid &= 0x3f;
- }
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
+static struct platform_driver it87_driver = {
+ .driver = {
+ .name = DRVNAME,
+ },
+ .probe = it87_probe,
+ .remove = it87_remove,
+};
static int __init it87_device_add(int index, unsigned short address,
const struct it87_sio_data *sio_data)
--
2.1.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
