Re: [PATCH v2 05/10] Documentation: add DT bindings for ARM SCPI sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Punit Agrawal <punit.agrawal@xxxxxxx> writes:

> The System Control Processor (SCP) provides access to SoC sensors via
> the System Control and Power Interface (SCPI) Message Protocol. Add
> bindings to allow probing of these sensors. Also support referencing
> of the sensors for setting up thermal zones via the thermal DT
> bindings.
>
> Signed-off-by: Punit Agrawal <punit.agrawal@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Sudeep Holla <sudeep.holla@xxxxxxx>

Gentle ping for the bindings review.

> ---
>  Documentation/devicetree/bindings/arm/arm,scpi.txt | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
> index e309249..8ead68a 100644
> --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
> +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
> @@ -72,8 +72,18 @@ Required sub-node properties:
>  - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
>  	       shared memory on Juno platforms
>  
> +Sensor bindings for the sensors based on SCPI Message Protocol
> +--------------------------------------------------------------
> +SCPI provides an API to access the various sensors on the SoC.
> +
> +Required properties:
> +- compatible : should be "arm,scpi-sensors".
> +- #thermal-sensor-cells: should be set to 1. This property follows the
> +			 thermal device tree bindings[2].
> +
>  [0] http://community.arm.com/servlet/JiveServlet/download/8401-45-18326/DUI0922B_scp_message_interface.pdf
>  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/thermal/thermal.txt
>  
>  Example:
>  
> @@ -122,6 +132,11 @@ scpi_protocol: scpi@2e000000 {
>  			clock-output-names = "pxlclk0", "pxlclk1";
>  		};
>  	};
> +
> +	scpi_sensors0: sensors {
> +		compatible = "arm,scpi-sensors";
> +		#thermal-sensor-cells = <1>;
> +	};
>  };
>  
>  cpu@0 {

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors



[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux