Hi, I'm not subscribed to the list, so, please add me in replies.
Thanks a lot in advance.
I'm trying to understand the readings of `sensors` in terminal.
This is a Debian 11 machine in a Gigabyte AM1M-S2H motherboard.
CPU: AMD Athlon(tm) 5150 APU with Radeon(tm) R3
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
Kabini [Radeon HD 8400 / R3 Series]
LXDE shows a temperature monitor in the taskbar.
Before installing/configuring lm-sensors package the reading was ~20ºC at idle.
After `sudo sensors-detect` an it87 module was added and now I have
these readings:
$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +20.9°C (high = +70.0°C)
(crit = +70.0°C, hyst = +69.0°C)
radeon-pci-0008
Adapter: PCI adapter
temp1: +21.0°C (crit = +120.0°C, hyst = +90.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: N/A (crit = 24.98 W)
it8620-isa-0228
Adapter: ISA adapter
in0: 1.12 V (min = +0.00 V, max = +3.06 V)
in1: 1.52 V (min = +0.00 V, max = +3.06 V)
in2: 2.02 V (min = +0.00 V, max = +3.06 V)
in3: 2.05 V (min = +0.00 V, max = +3.06 V)
in4: 2.04 V (min = +0.00 V, max = +3.06 V)
in5: 2.23 V (min = +0.00 V, max = +3.06 V)
in6: 2.23 V (min = +0.00 V, max = +3.06 V)
3VSB: 3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: 3.12 V
fan1: 2008 RPM (min = 10 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +31.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +38.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp3: +37.0°C (low = +0.0°C, high = +70.0°C) sensor = Intel PECI
temp4: +45.0°C
temp5: +45.0°C
temp6: +45.0°C
intrusion0: ALARM
The LXDE monitor now shows ~45ºC at idle, but htop keeps showing ~20ºC at the
same time.
Could anyone please indicate me which temperature correspond to which
hardware component?, or point me in the right direction (link, I suppose)
to read about? I'm trying to understand those values.
Thanks a lot again, and in general for all your very useful work. :)
Kind regards!
