From: Guenter Roeck <linux@xxxxxxxxxxxx>
On/Off mode is only supported for pwm controls 0-2, and not supported at all for
IT8603E/IT8623E. For pwm controls 3-6 and for IT8603E/IT8623E, SmartGuardian mode
is always enabled. Use it and set the pwm value to the maximum if fan control
is disabled.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/it87.c | 52 +++++++++++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 515c5cd1890b..f40d81a0a9fc 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1030,18 +1030,19 @@ static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
set_temp_type, 2);
-/* 3 Fans */
+/* 6 Fans */
static int pwm_mode(const struct it87_data *data, int nr)
{
- int ctrl = data->fan_main_ctrl & BIT(nr);
+ if (data->type != it8603 && nr < 3 && !(data->fan_main_ctrl & BIT(nr)))
+ return 0; /* Full speed */
+ if (data->pwm_ctrl[nr] & 0x80)
+ return 2; /* Automatic mode */
+ if ((data->type == it8603 || nr >= 3) &&
+ data->pwm_duty[nr] == pwm_to_reg(data, 0xff))
+ return 0; /* Full speed */
- if (ctrl == 0 && data->type != it8603) /* Full speed */
- return 0;
- if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
- return 2;
- else /* Manual mode */
- return 1;
+ return 1; /* Manual mode */
}
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
@@ -1242,21 +1243,30 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
return -EINVAL;
}
- /* IT8603E does not have on/off mode */
- if (val == 0 && data->type == it8603)
- return -EINVAL;
-
mutex_lock(&data->update_lock);
if (val == 0) {
- int tmp;
- /* make sure the fan is on when in on/off mode */
- tmp = it87_read_value(data, IT87_REG_FAN_CTL);
- it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
- /* set on/off mode */
- data->fan_main_ctrl &= ~BIT(nr);
- it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
- data->fan_main_ctrl);
+ if (nr < 3 && data->type != it8603) {
+ int tmp;
+ /* make sure the fan is on when in on/off mode */
+ tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+ it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
+ /* set on/off mode */
+ data->fan_main_ctrl &= ~BIT(nr);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+ data->fan_main_ctrl);
+ } else {
+ /* No on/off mode, set maximum pwm value */
+ data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
+ it87_write_value(data, IT87_REG_PWM_DUTY[nr],
+ data->pwm_duty[nr]);
+ /* and set manual mode */
+ data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
+ data->pwm_temp_map[nr] :
+ data->pwm_duty[nr];
+ it87_write_value(data, IT87_REG_PWM[nr],
+ data->pwm_ctrl[nr]);
+ }
} else {
if (val == 1) /* Manual mode */
data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
@@ -1266,7 +1276,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
- if (data->type != it8603) {
+ if (data->type != it8603 && nr < 3) {
/* set SmartGuardian mode */
data->fan_main_ctrl |= BIT(nr);
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
--
2.1.4
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
