Re: AMD A8 7600 - wrong values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Thank You, Guenter. Please, how could I correct that?

On 20.11.2015 14:46, Guenter Roeck wrote:
On 11/20/2015 03:10 AM, Peter Tuharsky wrote:

I have an AMD A8 7600 (socket FM2+). The sensors command gives wrong values; after boot, CPU has some 8 degree Celsius, after few minutes of runtime it gives this:

$ sensors
Adapter: PCI adapter
temp1:        +40.0°C  (crit = +120.0°C, hyst = +90.0°C)

Adapter: PCI adapter
temp1:        +40.5°C  (high = +70.0°C)
                        (crit = +80.0°C, hyst = +79.0°C)

(...althought going into BIOS shows some 70 degrees)

CPU sensors on those CPUs are very unreliable. You can try to correct
the reported numbers by adding configuration data to /etc/sensors3.conf.


$ sensors-detect
AMD Family 15h thermal sensors... Success!
     (driver `k10temp')

$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             AuthenticAMD
CPU family:            21
Model:                 48
Model name:            AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G
Stepping:              1
CPU MHz:               1900.000
CPU max MHz:           3100,0000
CPU min MHz:           1400,0000
BogoMIPS:              6188.73
Virtualization:        AMD-V
L1d cache:             16K
L1i cache:             96K
L2 cache:              2048K
NUMA node0 CPU(s):     0-3

Please, is it possible to correct this just by tweaking some values in conf?

lm-sensors mailing list

lm-sensors mailing list

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux