when checking for the value of the shunt resistor. Signed-off-by: Marc Titinger <mtitinger@xxxxxxxxxxxx> --- v2: - do part type init earlier to regroup rshunt value checking and assignement. drivers/hwmon/ina2xx.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 5e7ada8..5fe742b 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -417,7 +417,6 @@ static const struct attribute_group ina226_group = { static int ina2xx_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct ina2xx_platform_data *pdata; struct device *dev = &client->dev; struct ina2xx_data *data; struct device *hwmon_dev; @@ -428,24 +427,24 @@ static int ina2xx_probe(struct i2c_client *client, if (!data) return -ENOMEM; - if (dev_get_platdata(dev)) { - pdata = dev_get_platdata(dev); - data->rshunt = pdata->shunt_uohms; - } else if (!of_property_read_u32(dev->of_node, - "shunt-resistor", &val)) { - data->rshunt = val; - } else { - data->rshunt = INA2XX_RSHUNT_DEFAULT; - } - /* set the device type */ data->kind = id->driver_data; data->config = &ina2xx_config[data->kind]; - if (data->rshunt <= 0 || - data->rshunt > data->config->calibration_factor) + if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) { + struct ina2xx_platform_data *pdata = dev_get_platdata(dev); + + if (pdata) + val = pdata->shunt_uohms; + else + val = INA2XX_RSHUNT_DEFAULT; + } + + if (val <= 0 || val > data->config->calibration_factor) return -ENODEV; + data->rshunt = val; + ina2xx_regmap_config.max_register = data->config->registers; data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); -- 1.9.1 _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors