Linux USB Users

• Thread Index

• Re: [PATCH 2/3] usb: enable pci MSI/MSIX in usb core
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Set hub depth after USB3 hub reset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Need to know when usb drive probing finished
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Need to know when usb drive probing finished
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Need to know when usb drive probing finished
  • From: Barry Kauler <bkauler@xxxxxxxxx>
• Re: Bug caused by the ftdi-sio driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Bug caused by the ftdi-sio driver
  • From: wzab <wzab@xxxxxxxxxxxxx>
• Kernel warning, when connecting the USB flash disk
  • From: "wzabolot@xxxxxxxxxxxxxxxxxxxxxxx" <W.Zabolotny@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: OHCI/EHCI: generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH v2 03/19] ARM: at91: make matrix register base soc independent
  • From: Ryan Mallon <rmallon@xxxxxxxxx>
• Re: USB3 link PM policy design
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Bug 42739 - System will not suspend while iPod touch is connected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: CP2105 multiple interface support in cp210x.ko driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Bug 42739 - System will not suspend while iPod touch is connected
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Fwd: CP2105 multiple interface support in cp210x.ko driver
  • From: Preston Fick <pffick@xxxxxxxxx>
• Bug 42739 - System will not suspend while iPod touch is connected
  • From: Andrew Somerville <andy16666@xxxxxxxxx>
• Re: Move common used defines & data structures for BOT to include/
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• Re: Move common used defines & data structures for BOT to include/
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB bug fixes for 3.3-rc4
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB3 link PM policy design
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Huawei E398 cdc/serialmodem-ppp 3G/4G setup?
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 1/3] usb/storage: a couple defines from drivers/usb/storage/transport.h to include/linux/usb/storage.h
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/3] usb/gadget: use common defines within the storage gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] usb/storage: redefine US_BULK_FLAG_IN and use it
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Move common used defines & data structures for BOT to include/
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: host: xhci: add platform driver support
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [patch] hso: memsetting wrong data in hso_get_count()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] usb/core: remove "always" from usb_unlink_urb() kernel doc entry
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb/storage: a couple defines from drivers/usb/storage/transport.h to include/linux/usb/storage.h
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Huawei E398 cdc/serialmodem-ppp 3G/4G setup?
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH] usb/core: remove "always" from usb_unlink_urb() kernel doc entry
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: OHCI/EHCI: generic platform driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Bad Kconfig setting for Marvell EHCI host controller driver
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: [PATCH 0/3 v5] can/usb: Add PEAK-System PCAN USB adapters driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC v3] USB: Warn about USB3 devices plugged into USB2 hub.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v2 03/19] ARM: at91: make matrix register base soc independent
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [RFC v3] USB: Warn about USB3 devices plugged into USB2 hub.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [RFC v3] USB: Warn about USB3 devices plugged into USB2 hub.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [patch] hso: memsetting wrong data in hso_get_count()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] xHCI: BESL calculation based on USB2.0 LPM errata
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH][v6]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH][v6]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
• Re: [RFC 2/3] xHCI: debug command ring if it's full
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH] USB: Set hub depth after USB3 hub reset
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v3] USB: Warn about USB3 devices plugged into USB2 hub.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Pull Request] xHCI bug fixes for 3.3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/3] xHCI: debug command ring if it's full
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xHCI: BESL calculation based on USB2.0 LPM errata
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/3] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/3] USB: Set hub depth after USB3 hub reset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/3] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI bug fixes for 3.3
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Set hub depth after USB3 hub reset
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] USB: EHCI: Add a generic platform device driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 1/2] USB: OHCI: Add a generic platform device driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH v2 0/2] USB: OHCI/EHCI: generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: USB3 link PM policy design
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Bad Kconfig setting for Marvell EHCI host controller driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v.2] usb-storage: fix freezing of the scanning thread
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH v.2] usb-storage: fix freezing of the scanning thread
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v.2] usb-storage: fix freezing of the scanning thread
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: USB3 link PM policy design
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB3 link PM policy design
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v.2] usb-storage: fix freezing of the scanning thread
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 2/4] mcs7830: unify return value of .ndo_set_mac_address if address is invalid
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH 0/4] Part 1: unify return value of .ndo_set_mac_address if address is invalid
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: [PATCH] HID: Add quirk for CH Products Fighterstick
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: Adding OTG support to xHCI
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Wizard <wizarddewhite@xxxxxxxxx>
• [PATCH] usb: renesas_usbhs: bugfix: add .release function to gpriv->gadget.dev
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 3/3] pch_udc: Specifies GPI port number at configuration.
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• Re: [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 9/9] staging: ozwpan: Plumbed in Kconfig and Kbuild
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 4/9] staging: ozwpan: Added USB HCD implementation
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 5/9] staging: ozwpan: Added USB service to protocol
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 8/9] staging: ozwpan: Added debug support
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 7/9] staging: ozwpan: Added event logging support
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 6/9] staging: ozwpan: Added character device support
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 2/9] staging: ozwpan: Added basic L2 protocol support
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 3/9] staging: ozwpan: Added device state support
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 1/9] staging: ozwpan: Added driver entry code
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• Re: [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] ums_realtek: do not use stack memory for DMA in __do_config_autodelink
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>, utodelink@xxxxxxxxxx
• Re: [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: urb and ETIMEDOUT
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: tilman <tilmanglotzner@xxxxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cdc-acm with ID 0483:7270 not working
  • From: András Major <andras.g.major@xxxxxxxxx>
• Re: [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• Re: [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] net/usbnet: avoid recursive locking in usbnet_stop()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• urb and ETIMEDOUT
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: cdc-acm with ID 0483:7270 not working
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Thomas Dahlmann <dahlmann.thomas@xxxxxxxx>
• Re: cdc-acm with ID 0483:7270 not working
  • From: András Major <andras.g.major@xxxxxxxxx>
• [PATCH 1/3] USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH 3/3] usb: export usb_hcd_request_irqs
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH 2/3] usb: enable pci MSI/MSIX in usb core
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH v2 0/3] enable pci MSI/MSIX in usb core
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH 3/3] usb: export usb_hcd_request_irqs
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH 2/3] usb: enable pci MSI/MSIX in usb core
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH] USB-Serial: Add Abbot Diabetes Care cable
  • From: Andrew Lunn <andrew@xxxxxxx>
• RE: [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• Re: [PATCH] Staging: usbip: Remove commented code.
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Wizard <wizarddewhite@xxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• [PATCH] Staging: usbip: Remove commented code.
  • From: santosh nayak <santoshprasadnayak@xxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: Tilman <tilmanglotzner@xxxxxxxxxxx>
• Re: submitting code to the usb subsystem
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH] Staging: driver usbip: Code cleanup
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• submitting code to the usb subsystem
  • From: Tilman <tilmanglotzner@xxxxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: USBTMC/USB488 check if data available
  • From: Maxim Nikulin <M.A.Nikulin@xxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Wizard <wizarddewhite@xxxxxxxxx>
• [PATCH] Staging: driver usbip: Code cleanup
  • From: santosh prasad nayak <santoshprasadnayak@xxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: allow users to run setserial with cdc-acm
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Confirm the address of endpoint.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Seth Forshee <seth.forshee@xxxxxxxxxxxxx>
• question about drivers/usb/gadget/at91_udc.c
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: Out of tree HID driver
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb: Fix build error due to dma_mask is not at pdev_archdata at ARM
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] xHCI: BESL calculation based on USB2.0 LPM errata
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Confirm the address of endpoint.
  • From: Wizard <wizarddewhite@xxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH] USB: Set hub depth after USB3 hub reset
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• allow users to run setserial with cdc-acm
  • From: Dave Jones <davej@xxxxxxxxxx>
• Cannot get usbnet working on ARM s3c2410 gadget and Ubuntu LINUX host
  • From: cytan <cytan299@xxxxxxxxx>
• [PATCH] usb: dwc3: fix bogus test in dwc3_gadget_start_isoc
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] usb-storage: fix freezing of the scanning thread
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 03/18] ARM: at91: make matrix register base soc independent
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [BUG] EHCI build dependencies broken?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] EHCI build dependencies broken?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: isp1362-hcd: Convert to module_platform_driver
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• [PATCH] usb: isp1362-hcd: Convert to module_platform_driver
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [BUG] EHCI build dependencies broken?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] [trivial] usb: Fix typo in ehci-dbg.c
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• [PATCH 8/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 6/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 7/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 3/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 5/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 4/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 2/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 1/8] usb: USB over WiFi HCD driver
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 3/3 v5] can/usb: PEAK-System Technik PCAN-USB Pro specific part
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 2/3 v5] can/usb: PEAK-System Technik PCAN-USB specific part
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 1/3 v5] can/usb: PEAK-System Technik USB adapters driver core
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 0/3 v5] can/usb: Add PEAK-System PCAN USB adapters driver
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH][v5]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Li Yang <leoli@xxxxxxxxxxxxx>
• [BUG] EHCI build dependencies broken?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] usb: cdc-ncm: Set altsetting only when network interface is opened
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH 2/5] usb: cdc-ncm: Set altsetting only when network interface is opened
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• RE: usbcore and root-hub suspend/wakeup races
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH] usb: musb: Reselect index reg in interrupt context
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [PATCH] fix bug of device attached to superspeed hub can't be re-enumerated after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: [PATCH] USB: ehci-fsl: Turn on cache snooping on MPC8xxx
  • From: Li Yang <leoli@xxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• [PATCH] USB: ehci-fsl: Turn on cache snooping on MPC8xxx
  • From: Pan Jiafei <Jiafei.Pan@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Pan Jiafei-B37022 <B37022@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Pan Jiafei-B37022 <B37022@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Pan Jiafei-B37022 <B37022@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb:gadget:rndis:fix Missing req->context assignment
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: cdc-ncm: Change alternate setting magic numbers into #defines
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: USBTMC/USB488 check if data available
  • From: Ron Harding <rharding64@xxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Greg KH <greg@xxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Tushar K <tushark.kernel@xxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• FW: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: usbnet: Add validation of dev->maxpacket to usbnet
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• Re: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Leo Li <pku.leo@xxxxxxxxx>
• Re: [PATCHv11 00/19] First round in OTG rework
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] powerpc/usb: fix bug of kernel hang when initializing usb
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Li Yang <leoli@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH][v4]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: Moving setting of data interface in CDC NCM driver
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 7/7 v2] usb: dwc3: add the hibernation code itself
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 6/7 v2] usb: dwc3: refactor some existing routines for hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 5/7 v2] usb: dwc3: add two gadget functions needed for hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 4/7 v2] usb: dwc3: support new/changed functionality of latest controllers
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 3/7 v2] usb: dwc3: add definitions for new registers
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 2/7 v2] usb: dwc3: a few fixes/improvements
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 1/7 v2] usb: dwc3: clean up whitespace damage, typos, missing parens, etc.
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 0/7 v2] usb: dwc3: add hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• [PATCH] usb: Fix build error due to dma_mask is not at pdev_archdata at ARM
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2] usb: fsl_udc_core: prime status stage once data stage is primed
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [RFC] usb: Fix build error due to dma_mask is not at pdev_archdata at ARM
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] net: replace random_ether_addr() with eth_hw_addr_random()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] ipheth: Add iPhone 4S
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] usb: usbnet: Allow drivers using usbnet to specify maximum packet size
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 4/5] usb: usbnet: Add validation of dev->maxpacket to usbnet
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] at91_udc: linux/prefetch.h included twice
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH] dwc3: linux/module.h included twice
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH] ipheth: Add iPhone 4S
  • From: Tim Gardner <tim.gardner@xxxxxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] net: replace random_ether_addr() with eth_hw_addr_random()
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-host: Remove magic numbers for dev dma mask
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Moving setting of data interface in CDC NCM driver
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-host: Remove magic numbers for dev dma mask
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH 5/5] usb: cdc-ncm: Allow NCM driver to determine dev->maxpacket
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 4/5] usb: usbnet: Add validation of dev->maxpacket to usbnet
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 2/5] usb: cdc-ncm: Set altsetting only when network interface is opened
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 3/5] usb: usbnet: Allow drivers using usbnet to specify maximum packet size
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 0/5] Delay selecting alternate setting in CDC NCM until network interface is raised
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [PATCH 1/5] usb: cdc-ncm: Change alternate setting magic numbers into #defines
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: Moving setting of data interface in CDC NCM driver
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: Moving setting of data interface in CDC NCM driver
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdc-ncm: Increase maximum allowed datagram size
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• [PATCH] usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] mfd: omap-usb-host: Move usbhs init before allocing child dev
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] mfd: omap-usb-host: Remove magic numbers for dev dma mask
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] mfd: omap-usb-host: Move usbhs init before allocing child dev
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 1/2] mfd: omap-usb-host: Remove magic numbers for dev dma mask
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 0/2] mfd: omap-usb-host: Minor omap-usb host fixes
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: usb: dwc3: use devm_xxx functions
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: usb: dwc3: use devm_xxx functions
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• RE: usb: dwc3: use devm_xxx functions
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• [PATCH] usb gadget: fix race between eth_open() and gen_ndis_set_resp()
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: usb: dwc3: use devm_xxx functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: usb: dwc3: use devm_xxx functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: Add Exynos Specific Glue layer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: usb: dwc3: use devm_xxx functions
  • From: Felipe Balbi <balbi@xxxxxx>
• usb: dwc3: use devm_xxx functions
  • From: Chanho Park <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: Add Exynos Specific Glue layer
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] usb: dwc3: Add Exynos Specific Glue layer
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdc-ncm: Increase maximum allowed datagram size
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [RFC] usb: Fix build error due to dma_mask is not at pdev_archdata at ARM
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: dwc3: Add Exynos Specific Glue layer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] USB: Gadget: Rename audio function to uac1
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: Add Exynos Specific Glue layer
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Re: [PATCH] usb:gadget:rndis:fix Missing req->context assignment
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Adding OTG support to xHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: fsl_udc_core: add solution for USB 2.0 spec 8.5.3.3
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• [PATCH 1/1] usb: fsl_udc_core: add solution for USB 2.0 spec 8.5.3.3
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH] usb:gadget:rndis:fix Missing req->context assignment
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• device attached to USB 3.0 hub port doesn't respond address device command after resume
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• [PATCH 1/4 v2] ARM: at91: usb ohci add dt support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• [PATCH 1/1] usb: fsl_udc_core: Fix scheduling while atomic dump message
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Moving setting of data interface in CDC NCM driver
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [Pull Request] xHCI bug fix for 3.3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Pull request] USB3 hub suspend for 3.4
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdc-ncm: Increase maximum allowed datagram size
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Out of tree HID driver
  • From: Nikolai Kondrashov <spbnick@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: at91: usb ohci add dt support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 8/8] USB: Turn on auto-suspend for USB 3.0 hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 7/8] USB: Set wakeup bits for all children hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/8] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/8] USB/xHCI: Enable USB 3.0 hub remote wakeup.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/8] USB: Refactor hub remote wake handling.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/8] USB: Suspend functions before putting dev into U3.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/8] USB/xhci: Enable remote wakeup for USB3 devices.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/8] xHCI: Kick khubd when USB3 resume really completes.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull request] USB3 hub suspend for 3.4
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: USB Class Drivers Supported
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 1/1] usb: cdc-ncm: Increase maximum allowed datagram size
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 3/4] ARM: at91: usb ehci add dt support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 1/1] USB: Don't fail USB3 probe on missing legacy PCI IRQ.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI bug fix for 3.3
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: at91: usb ohci add dt support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Adding OTG support to xHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] ARM: at91: usb ohci add dt support
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] HID: Add quirk for CH Products Fighterstick
  • From: Ville Ranki <ville.ranki@xxxxxx>
• Adding OTG support to xHCI
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: cdc-ncm: Increase maximum allowed datagram size
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• [RFC experiment 2/2] qmi_wwan: support "raw IP" mode
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC experiment 1/2] usbnet: allow mini-drivers to consume L2 headers
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC experiment 0/2] Qualcom raw IP mode
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Moving setting of data interface in CDC NCM driver
  • From: Toby Gray <toby.gray@xxxxxxxxxxx>
• Re: [PATCH 2/2 v3] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2 v3] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 7/9] USB:s3c-hsotg: Remove Disconnect Interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/9] USB:s3c-hsotg: Increase number of available endpoints.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] ISP116x Host Controller Driver Device Tree Support
  • From: Vishnu Nambiar <vishnu@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] USB:s3c-hsotg: Remove Disconnect Interrupt handler
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 5/9] USB:s3c-hsotg: Increase number of available endpoints.
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 1/2 v3] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 2/2 v3] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 6/9] USB:s3c-hsotg: Extract core initialization function
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCHv11 16/19] usb: otg: mv_otg: Start using struct usb_otg
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: [PATCH 6/9] USB:s3c-hsotg: Extract core initialization function
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 9/9] USB:s3c-hsotg: Cable disconnection recovery code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] USB:s3c-hsotg: Rename s3c_hsotg_disconnect function
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 7/9] USB:s3c-hsotg: Remove Disconnect Interrupt handler
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/9] USB:s3c-hsotg: Increase number of available endpoints.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/9] USB:s3c-hsotg: Extract core initialization function
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 4/9] USB:s3c-hsotg: Sending ZLP packet for IN EP0 transfers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb: Reselect index reg in interrupt context
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] USB:s3c-hsotg: NAK management for EP0 (Setup stage of control transfers)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/9] USB: s3c-hsotg: Add regulator support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb:gadget:rndis:fix Missing req->context assignment
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: USB Class Drivers Supported
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: host: ehci: allow ehci_* symbols to be unused
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC] usb: Fix build error due to dma_mask is not at pdev_archdata at ARM
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• RE: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFT] USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [RFT] USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: DGT electronic chess board USB driver
  • From: Greg KH <greg@xxxxxxxxx>
• DGT electronic chess board USB driver
  • From: Ronald Pose <Ronald.Pose@xxxxxxxxxx>
• Re: On the 19th Dec I reported an OOPS when attaching a BeagleBone
  • From: David Goodenough <david.goodenough@xxxxxxxxxxxxxxxx>
• Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Greg KH <greg@xxxxxxxxx>
• Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Josua Dietze <digidietze@xxxxxxxxxxxxxxx>
• Re: [Pull Request] xHCI bug fixes for 3.3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFT] xhci: Fix encoding for HS bulk/control NAK rate.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: 答复: Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xHCI debugging enable
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB 3.0 : host-to-host communication
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: EHCI: Add a generic platform device driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: On the 19th Dec I reported an OOPS when attaching a BeagleBone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/3] USB: OHCI/EHCI: add struct for generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 1/3] USB: OHCI/EHCI: add struct for generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: EHCI: Add a generic platform device driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: OHCI/EHCI: add struct for generic platform driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• RE: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Help with USB external hard drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Qualcomm "raw IP" mode (was Re: Huawei E398 cdc/serialmodem-ppp 3G/4G)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/9] usb: gadget: generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCHv11 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv11 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 2/2] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 1/2] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv11 00/19] First round in OTG rework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv11 19/19] usb: otg: Convert all users to pass struct usb_otg for OTG functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv11 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCHv11 10/19] usb: otg: twl4030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 19/19] usb: otg: Convert all users to pass struct usb_otg for OTG functions
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 17/19] usb: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 15/19] power_supply: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 16/19] usb: otg: mv_otg: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 13/19] arm: imx: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 14/19] usb: musb: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 12/19] usb: otg: ulpi: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 11/19] usb: otg: twl6030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 09/19] usb: otg: nop: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 08/19] usb: otg: msm: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 07/19] usb: otg: isp1301_omap: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 06/19] usb: otg: gpio_vbus: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 05/19] usb: otg: fsl: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 04/19] usb: otg: ab8500: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 03/19] usb: otg: Separate otg members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 02/19] usb: otg: Rename usb_xceiv_event to usb_phy_event
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv11 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: OHCI/EHCI: add struct for generic platform driver
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: Help with USB external hard drive
  • From: Glynn Clements <glynn@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• Re: [PATCHv10 00/19] First round in OTG rework
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: Help with USB external hard drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] USB: EHCI: Add a generic platform device driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 0/3] USB: OHCI/EHCI: generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 2/3] USB: OHCI: Add a generic platform device driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 1/3] USB: OHCI/EHCI: add struct for generic platform driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: Help with USB external hard drive
  • From: Glynn Clements <glynn@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] cdc-wdm: Fix more races on the read path
  • From: Bjørn Mork <bjorn@xxxxxxx>