Linux USB Users

• Thread Index

• Re: Help with USB external hard drive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] SCSI: Fix 'Poison overwritten' warning caused by using freed 'shost'
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] cdc-wdm: Fix more races on the read path
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• [PATCH] SCSI: Fix 'Poison overwritten' warning caused by using freed 'shost'
  • From: Huajun Li <huajun.li.lee@xxxxxxxxx>
• Re: [PATCH 1/2] cdc-wdm: Fix more races on the read path
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2] cdc-wdm: Fix more races on the read path
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• [PATCH 2/2] cdc-wdm: Don't clear WDM_READ unless entire read buffer is emptied
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• [PATCH 1/2] cdc-wdm: Fix more races on the read path
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Help with USB external hard drive
  • From: Glynn Clements <glynn@xxxxxxxxxxxxxxxxxx>
• Re: 04d9:a055: Trust GXT 18 Gaming Keyboard: error -22
  • From: Sergey Spiridonov <sena@xxxxxxxxxxxxxxxxx>
• [PATCH] [trivial] usb: Fix typo in imx21-dbg.c
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH 2/2] xhci: Fix oops caused by more USB2 ports than USB3 ports.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/2] USB: Remove duplicate USB 3.0 hub feature #defines.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI bug fixes for 3.3
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Pl2303 usb-serial adapter receives but does not transmit
  • From: pierigno <pierigno@xxxxxxxxx>
• Re: [PATCH v4 RESEND] usb: cdc-wdm: make reset work with blocking IO
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 RESEND] usb: cdc-wdm: make reset work with blocking IO
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 RESEND] usb: cdc-wdm: make reset work with blocking IO
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] USB: serial: fix console error reporting
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Pl2303 usb-serial adapter receives but does not transmit
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 RESEND] usb: cdc-wdm: make reset work with blocking IO
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH v3] usb/gadget: remove DUALSPEED from printer
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: OMAP4: Fix the omap4430_phy_set_clk function
  • From: Marek Vasut <marek.vasut@xxxxxxxxxxxxx>
• [PATCH] usb: otg: OMAP4: Fix the omap4430_phy_set_clk function
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• [PATCH 0/3] USB: serial: fix console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxxxxxx>
• [PATCH 3/3] USB: serial: use dev_err_console in custom write paths
  • From: Johan Hovold <jhovold@xxxxxxxxxxxxx>
• [PATCH 1/3] USB: serial: fix console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxxxxxx>
• [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Johan Hovold <jhovold@xxxxxxxxxxxxx>
• Re: [PATCH] usb: otg: OMAP4: Fix the omap4430_phy_set_clk function
  • From: "Bilovol, Ruslan" <x0155540@xxxxxx>
• Re: [PATCH] usb: otg: OMAP4: Fix the omap4430_phy_set_clk function
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: ep0: fix SetFeature(TEST)
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: otg: OMAP4: Fix the omap4430_phy_set_clk function
  • From: "Bilovol, Ruslan" <x0155540@xxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: ep0: fix SetFeature(TEST)
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: dwc3: debugfs: fix off by one when entering testmode
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] Two fixes to dwc3's test mode
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxxxxxx>
• RE: [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] USB: s3c-hsotg: Add regulator support
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 3/9] USB:s3c-hsotg: NAK management for EP0 (Setup stage of control transfers)
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 6/9] USB:s3c-hsotg: Extract core initialization function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 8/9] USB:s3c-hsotg: Rename s3c_hsotg_disconnect function
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 5/9] USB:s3c-hsotg: Increase number of available endpoints.
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 9/9] USB:s3c-hsotg: Cable disconnection recovery code
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 7/9] USB:s3c-hsotg: Remove Disconnect Interrupt handler
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 4/9] USB:s3c-hsotg: Sending ZLP packet for IN EP0 transfers
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 1/9] USB: s3c-hsotg: Add platform data callbacks for phy control
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 0/9] USB: s3c-hsotg: USB S3C-HSOTG driver fixes and code cleanup
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH 2/9] USB: s3c-hsotg: Add regulator support
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• Re: [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] usb:gadget:rndis:fix Missing req->context assignment
  • From: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
• [PATCH v4 RESEND] usb: cdc-wdm: make reset work with blocking IO
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Pl2303 usb-serial adapter receives but does not transmit
  • From: pierigno <pierigno@xxxxxxxxxxxxx>
• Re: Want to Get Suggestion for MX28 USB Submisson
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• RE: Want to Get Suggestion for MX28 USB Submisson
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH 2/2] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 1/2] usb: renesas_usbhs: (cosmetic) simplify list operations
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: 04d9:a055: Trust GXT 18 Gaming Keyboard: error -22
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: USB 3.0 : host-to-host communication
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: "clear_halt for a busy endpoint" from USB printers.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB 3.0 : host-to-host communication
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB bug fixes for 3.3-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• USB 3.0 : host-to-host communication
  • From: Olivier DOLE <olivier.dole@xxxxxxxxx>
• [RFC v2] USB: Fix handoff when BIOS disables host PCI device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Pl2303 usb-serial adapter receives but does not transmit
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Pl2303 usb-serial adapter receives but does not transmit
  • From: pierigno <pierigno@xxxxxxxxx>
• Re: [PATCHv10 17/19] usb: Convert all users to new usb_phy
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Outstanding cdc-wdm patches
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Outstanding cdc-wdm patches
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Outstanding cdc-wdm patches
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: "clear_halt for a busy endpoint" from USB printers.
  • From: Dave Jones <davej@xxxxxxxxxx>
• Re: [RFC] xhci: Fix BIOS handoff failure on some Intel systems.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 37/50] usbnet: set addr_assign_type if random_ether_addr() used
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: Update ci13xxx_udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Maximum patch size
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Maximum patch size
  • From: Chris Kelly <ckelly@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: Update ci13xxx_udc to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• [PATCH 0/2] Use usb_endpoint_descriptor inside the struct usb_ep
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• RE: [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: USB Gudget: How to alloc memory from customized area
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCH 02/50] smsc95xx: use dev_hw_addr_random() instead of random_ether_addr()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: USB Gudget: How to alloc memory from customized area
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• RE: [PATCHv10 17/19] usb: Convert all users to new usb_phy
  • From: Li Yang-R58472 <r58472@xxxxxxxxxxxxx>
• [PATCH v3 2/5] ptp-gadget: Add delete object support
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [PATCHv10 17/19] usb: Convert all users to new usb_phy
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCHv10 17/19] usb: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] ptp-gadget: Add delete object support
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [RFC] xhci: Fix BIOS handoff failure on some Intel systems.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• USB Gudget: How to alloc memory from customized area
  • From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
• Re: [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v4] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb/gadget: add usb3.0 descriptors to serial gadgets
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] usb/gadget: clean the ep in autoconf before returning it.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb/gadget: remove DUALSPEED from printer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/3] pch_udc: Detecting VBUS through GPIO with interrupt
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3 v2] pch_udc: Detecting VBUS through GPIO
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] pch_udc: Detecting VBUS through GPIO with interrupt
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] pch_udc: Specifies GPI port number at configuration.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3 v2] usb/dummy_hcd: fix null-deref free req
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] usb/dummy_hcd: don't assign ->desc on error case
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Hang with DWC3 driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 37/50] usbnet: set addr_assign_type if random_ether_addr() used
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: Hang with DWC3 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: [RFC] xhci: Fix BIOS handoff failure on some Intel systems.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 37/50] usbnet: set addr_assign_type if random_ether_addr() used
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: [PATCH 37/50] usbnet: set addr_assign_type if random_ether_addr() used
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 37/50] usbnet: set addr_assign_type if random_ether_addr() used
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH 38/50] g_ether: set addr_assign_type if random_ether_addr() used
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH 02/50] smsc95xx: use dev_hw_addr_random() instead of random_ether_addr()
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• [PATCH 03/50] smsc75xx: se dev_hw_addr_random() instead of random_ether_addr()
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• RE: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Hang with DWC3 driver
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• RE: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] ptp-gadget: Add delete object support
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH v3 1/5] ptp-gadget: Fix issue in enum_object
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2 2/5] ptp-gadget: Add delete object support
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v2 1/5] ptp-gadget: Fix issue in enum_object
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [PATCH v2 2/5] ptp-gadget: Add delete object support
  • From: Anatolij Gustschin <agust@xxxxxxx>
• RE: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Fix BIOS handoff failure on some Intel systems.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• [PATCH 0/1] usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Thomas Dahlmann <dahlmann.thomas@xxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• [PATCH 3/3 v5] usb: musb: enable support for am335x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH][v3]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] usb: dwc3: first part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• [PATCH 2/3 v5] arm: omap: am335x: enable phy controls
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/3 v5] usb: musb: enable support for am335x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v5] usb: musb: Add support for ti81xx platform
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• RE: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Location for the correct directory path for placing a driver -- Please suggest
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC] xhci: Fix BIOS handoff failure on some Intel systems.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH RESEND] FunctionFS: enable multiple functions
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• RE: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v2] usb/gadget: remove DUALSPEED from printer
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: "Ido Shayevitz" <idos@xxxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• RE: [PATCH 3/4] usb: dwc3: first part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] USB: SET SEL request definition
  • From: "'Greg Kroah-Hartman'" <greg@xxxxxxxxx>
• [PATCH 1/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• [PATCH 0/1] usb: gadget: Update all UDCs to use usb_endpoint_descriptor inside the struct usb_ep
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• Re: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Thomas Dahlmann <dahlmann.thomas@xxxxxxxx>
• Re: [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• RE: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Umakanta Patro <umakanta.patro@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 3/3] USB: EXYNOS USB3.0 device controller driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] usb: dwc3: first part of hibernation support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] USB: SET SEL request definition
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• RE: [PATCH RESEND] FunctionFS: enable multiple functions
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 3/3] USB: EXYNOS USB3.0 device controller driver
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• [PATCH 4/4] usb: dwc3: second part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 3/4] usb: dwc3: first part of hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 2/4] usb: dwc3: a few fixes/improvements
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 1/4] usb: dwc3: clean up whitespace damage, typos, etc.
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 0/4] usb: dwc3: add hibernation support
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: SAMSUNG: Add support for EXYNOS SS USB 3.0 DRD controller
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH RESEND] FunctionFS: enable multiple functions
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: "clear_halt for a busy endpoint" from USB printers.
  • From: Dave Jones <davej@xxxxxxxxxx>
• [PATCH 1/3 v3] USB: serial: add macro for console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: "clear_halt for a busy endpoint" from USB printers.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb/gadget: add usb3.0 descriptors to serial gadgets
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/gadget: clean the ep in autoconf before returning it.
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: "clear_halt for a busy endpoint" from USB printers.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• "clear_halt for a busy endpoint" from USB printers.
  • From: Dave Jones <davej@xxxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 1/3 v2] USB: serial: add macro for console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 1/3] USB: serial: add macro for console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Can't suspend while IR receiver is plugged in
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: serial: add macro for console error reporting
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] FunctionFS: multiinstance wip
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/3] USB: SET SEL request definition
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb: enable pci MSI/MSIX in usb core
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• xHCI debugging enable
  • From: shashank chaturvedi <chaturvedi9950@xxxxxxxxx>
• [PATCH] usb: dwc3: gadget: avoid memcpy()ing event buffer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: dwc3: convert TRBs into bitshifts
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH/RFC] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH/RFC] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 0/3] USB: serial: fix console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/3] USB: serial: use dev_err_console in custom write paths
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/3] USB: serial: use dev_err_console in generic write
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 1/3] USB: serial: add macro for console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v2] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH/RFC] usb: fix renesas_usbhs to not schedule in atomic context
  • From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 3/3] USB: EXYNOS USB3.0 device controller driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH RESEND] FunctionFS: enable multiple functions
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH] FunctionFS: multiinstance wip
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 3/3] USB: EXYNOS USB3.0 device controller driver
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• [PATCH 2/3] USB: SET SEL request definition
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• [PATCH 1/3] ARM: SAMSUNG: Add support for EXYNOS SS USB 3.0 DRD controller
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• Re: [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/10] usb/gadget: remove DUALSPEED from printer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [patch] usb: dwc3: make dwc3_get_device_id() return the id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: patch review: try setup MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• [PATCH v2.1 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v4] usb: cdc-wdm: make reset work with blocking IO
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH/RFC] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v2 2/9] xHCI: Kick khubd when USB3 resume really completes.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: Can't suspend while IR receiver is plugged in
  • From: Konstantin Svist <fry.kun@xxxxxxxxx>
• RE: [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH 09/10] usb/fsl_udc_core: convert to new style start/stop
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 08/10] usb/fsl_qe_udc: remove not implemented callbacks
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 07/10] usb/fsl_qe_udc: convert to new style start/stop
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 06/10] usb/atmal_usba_udc: convert to newstyle start/stop interface
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 05/10] usb/at91_udc: convert to new style start/stop interface
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 01/10] usb/gadget: remove DUALSPEED from printer
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• converting printer & and a few udcs
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 03/10] usb/amd5536udc: move disconnect code into ISR
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 02/10] usb/gadget: make g_printer use composite
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 04/10] usb/amd5536udc: convert to new style interface
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 10/10] usb/imx_udc: convert to new style start/stop
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 1/2] usb: musb: fix some runtime_pm issues
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH 2/2] usb: musb: wake the device before ulpi transfers
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH 0/2] musb runtime_pm fixes
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] USB: serial: fix console error reporting
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 6/6] usb/composite: merge the two spinlocks
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v3] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb/composite: merge the two spinlocks
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] USB: debugging code shouldn't alter control flow
  • From: Keith Packard <keithp@xxxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Greg KH <greg@xxxxxxxxx>
• [patch] usb: dwc3: make dwc3_get_device_id() return the id
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: Want to Get Suggestion for MX28 USB Submisson
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Tushar K <tushark.kernel@xxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: Want to Get Suggestion for MX28 USB Submisson
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [PATCH V4 1/2] usb: Add support for indicating whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• [PATCH V4 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• [PATCH V3] usb: Use hub port data to determine whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• Re: [PATCH V2 1/2] usb: Add support for indicating whether a port is removable
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] usb: Add support for indicating whether a port is removable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Want to Get Suggestion for MX28 USB Submisson
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI fatal error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 1/2] usb: Add support for indicating whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• [PATCH V2 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: Add support for indicating whether a port is removable
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] USB: sa1111: add hcd .reset method
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] USB: sa1111: add OHCI shutdown methods
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] USB: sa1111: reorganize ohci-sa1111.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] USB: sa1111: sparse and checkpatch cleanups
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: Use hub port data to determine whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• [PATCH 1/2] usb: Add support for indicating whether a port is removable
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• EHCI fatal error
  • From: Christian Janoff <lkml@xxxxxxxxx>
• Re: [GIT PULL] USB fixes for 3.3-rc3
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC 3.1-stable] USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB:xhci: fix port switching on PantherPoint
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• [PATCH/RFC] usb: fix renesas_usbhs to not schedule in atomic context
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB:xhci: fix port switching on PantherPoint
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB:xhci: fix port switching on PantherPoint
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: Distinguish Kconfig text for Freescale controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: USB Class Drivers Supported
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usbserial: add new PID number (0xa951) to the ftdi driver
  • From: Milan Kocian <milon@xxxxx>
• [PATCH 1/2] usb: host: xhci: add platform driver support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] usb: dwc3: host: align on host device name
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] xHCI platform support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] USB:xhci: fix port switching on PantherPoint
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: failure of port switching to XHCI on PantherPoint on boot
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 3/3] pch_udc: Specifies GPI port number at configuration.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: host: Distinguish Kconfig text for Freescale controllers
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• RE: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [GIT PULL] USB fixes for 3.3-rc3
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• USB Class Drivers Supported
  • From: Tushar K <tushark.kernel@xxxxxxxxx>
• RE: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH 1/3 v2] pch_udc: Detecting VBUS through GPIO
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3 v2] pch_udc: Detecting VBUS through GPIO
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• Re: [PATCH] usb: host: Distinguish Kconfig text for Freescale controllers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [Patch] musb: fix a build error on mips
  • From: Felipe Balbi <balbi@xxxxxx>
• [Patch] musb: fix a build error on mips
  • From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
• [PATCH 1/3] pch_udc: Detecting VBUS through GPIO
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• [PATCH 2/3] pch_udc: Detecting VBUS through GPIO with interrupt
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• [PATCH 3/3] pch_udc: Specifies GPI port number at configuration.
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• USB Class Drivers Supported
  • From: Tushar K <tushark.kernel@xxxxxxxxx>
• Re: [PATCH] ARM: LPC32xx: Support for OHCI HCD
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [Pull request] UAS fixes for 3.4
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Pull request] UAS fixes for 3.4
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
• Re: [RFC v3 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] USB: debugging code shouldn't alter control flow
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: failure of port switching to XHCI on PantherPoint on boot
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: failure of port switching to XHCI on PantherPoint on boot
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/4] USB: Gadget: Add Audio Class 2.0 Driver
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• [PATCH 3/4] USB: Gadget: Audio: Move string IDs to audio.c
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• [PATCH 2/4] USB: UAC2: Add ACHeader and FormatType descriptor
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• [PATCH 1/4] USB: Gadget: Rename audio function to uac1
  • From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
• [PATCH] usb: host: Distinguish Kconfig text for Freescale controllers
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: Gadget: Add Audio Class 2.0 Driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• [PATCH] ARM: LPC32xx: Support for OHCI HCD
  • From: stigge@xxxxxxxxx
• Re: [PATCH] ARM: LPC32xx: Support for OHCI HCD
  • From: Roland Stigge <stigge@xxxxxxxxx>
• failure of port switching to XHCI on PantherPoint on boot
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v3] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v3] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v3] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] Regression: Revert "Bluetooth: use buffer priority to mark URB_ISO_ASAP flag"
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v3] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] HID: usbhid: fix dead lock between open and disconect
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH v2 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 4/4] qcserial: don't enable autosuspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] HID: usbhid: fix dead lock between open and disconect
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [RFC v3 8/9] USB: Set wakeup bits for all children hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v3 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
• [PATCH v2] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• Re: high speed cams are not working on usbip
  • From: David Chang <dchang@xxxxxxxx>
• Re: patch review: try setup MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: ttuttle <ttuttle@xxxxxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: ttuttle <ttuttle@xxxxxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] qcserial: add several new serial devices
  • From: Thomas Tuttle <ttuttle@xxxxxxxxxxxx>
• [PATCH 4/4] qcserial: don't enable autosuspend
  • From: Thomas Tuttle <ttuttle@xxxxxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: ttuttle <ttuttle@xxxxxxxxxxxx>
• Re: [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] qcserial: remove unused "debug" parameter
  • From: ttuttle <ttuttle@xxxxxxxxxxxx>
• [57/89] usb: gadget: langwell: dont call gadgets disconnect()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] qcserial: remove unused "debug" parameter
  • From: Thomas Tuttle <ttuttle@xxxxxxxxxxxx>
• [PATCH 2/4] qcserial: log when an interface has too many altsettings
  • From: Thomas Tuttle <ttuttle@xxxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] qcserial: several fixes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] qcserial: several fixes
  • From: ttuttle <ttuttle@xxxxxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Gadget driver rules question
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Gadget driver rules question
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Testusb case 14, passing more than 64B to ep0
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• [PATCH v2 5/5] net: qmi_wwan: add Dell Gobi and Pantech UML290 devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 4/5] net: qmi_wwan: support devices having a shared QMI/wwan interface
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 0/5] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 1/5] usb: cdc-wdm: split out reusable parts of probe
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 2/5] usb: cdc-wdm: adding list lookup indirection
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 3/5] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/5] Dynamic ID addition doesn't need get_driver()
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH v2] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• [PATCH] powerpc/usb: fix issue of CPU halt when missing USB PHY clock
  • From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
• patch review: try setup MSI/MSIX in usb core
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Loh Tien Hock <thloh85@xxxxxxxxx>
• [PATCH v3] usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v2] usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH v2] usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] smsc95xx: add macaddr module parameter
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] smsc95xx: add macaddr module parameter
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] smsc95xx: add macaddr module parameter
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] smsc95xx: add macaddr module parameter
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>