Linux USB Users

• Thread Index

• Re: ftdi_sio occasionally hangs in close()
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Stefan Becker <chemobejk@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: debugfs: fix error check
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: debugfs: fix error check
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: debugfs: fix error check
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: musb: debugfs: fix error check
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: locking problems in cdc-wdm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: cdc-wdm: cannot wait forever for blocking read/write on reset
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: musb: debugfs: fix error check
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] usb: musb: make modules behave better
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH] usb: dwc3: debugfs: fix error check
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: locking problems in cdc-wdm
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 02/15] Updated TTY MAINTAINERS info
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 09/52] usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• locking problems in cdc-wdm
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Stefan Becker <chemobejk@xxxxxxxxx>
• RE: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH] usb: ch9.h: bugfix: usb_endpoint_maxp() is wrapped with __KERNEL__
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usbcore and root-hub suspend/wakeup races
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v5 2/2] USB: try MSI before legacy irq on pci xhci HCD
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• RE: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: Patch Upstream: usb: otg: kill langwell_otg driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 12/16] kobil_sct: fix debug module parameter to be bool
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/16] kobil_sct: fix debug module parameter to be bool
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• usbcore and root-hub suspend/wakeup races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH 01/15] serial: group all the 8250 related code together
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 10/15] serial: amba-pl011: lock console writes against interrupts
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 09/15] amba-pl011: do not disable RTS during shutdown
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 08/15] tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 07/15] tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 06/15] omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 05/15] omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 04/15] TTY: fix UV serial console regression
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 03/15] jsm: Fixed EEH recovery error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 02/15] Updated TTY MAINTAINERS info
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 15/15] serial: Kill off Moorestown code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 14/15] Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 13/15] Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 12/15] serial: Fix wakeup init logic to speed up startup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 11/15] docbook: don't use serial_core.h in device-drivers book
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 19/52] USB: ftdi_sio: fix initial baud rate
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 28/52] USB: cp210x: initialise baud rate at open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 27/52] USB: cp210x: clean up, refactor and document speed handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 26/52] USB: cp210x: do not map baud rates to B0
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 25/52] USB: cp210x: fix up set_termios variables
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 24/52] USB: cp210x: fix CP2104 baudrate usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 23/52] USB: cp210x: call generic open last in open
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 22/52] USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 52/52] uwb & wusb: fix kconfig error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 51/52] USB: Realtek cr: fix autopm scheduling while atomic
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 50/52] USB: ftdi_sio: Add more identifiers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 49/52] xHCI: Cleanup isoc transfer ring when TD length mismatch found
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 21/52] USB: serial: ftdi additional IDs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 48/52] usb: musb: omap2430: minor cleanups.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 47/52] qcaux: add more Pantech UML190 and UML290 ports
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 46/52] Revert "drivers: usb: Fix dependency for USB_HWA_HCD"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 45/52] usb: mv-otg - Fix build if CONFIG_USB is not set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 44/52] USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 43/52] usb: add support for STA2X11 host driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 42/52] drivers: usb: Fix dependency for USB_HWA_HCD
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 41/52] kernel-doc: fix new warning in usb.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 40/52] USB: OHCI: fix new compiler warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 39/52] usb: serial: kobil_sct: fix compile warning:
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 20/52] USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 38/52] drivers/usb/host/ehci-fsl.c: add missing iounmap
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 37/52] USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 35/52] USB: cdc-wdm: use two mutexes to allow simultaneous read and write
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 36/52] USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 01/52] xhci: Fix USB 3.0 device restart on resume.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 34/52] USB: cdc-wdm: updating desc->length must be protected by spin_lock
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 33/52] USB: usbsevseg: fix max length
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 32/52] USB: option: Add LG docomo L-02C
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 31/52] usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 30/52] Revert "USB: usb-skeleton.c: fix open/disconnect race"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 29/52] USB: cp210x: allow more baud rates above 1Mbaud
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 10/52] usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 09/52] usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 08/52] usb: gadget: storage: endian fix
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 07/52] usb: dwc3: ep0: fix compile warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 06/52] usb: musb: davinci: fix build breakage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 05/52] usb: gadget: langwell: don't call gadget's disconnect()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 04/52] usb: gadget: langwell: drop langwell_otg support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 03/52] usb: otg: kill langwell_otg driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 02/52] usb: dwc3: ep0: tidy up Pending Request handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 18/52] USB: ftdi_sio: fix TIOCSSERIAL baud_base handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 17/52] drivers/usb/misc/emi26.c & emi62.c: fix warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 16/52] usb: dwc3: unmap the proper number of sg entries
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 15/52] usb: musb: fix shutdown while usb gadget is in use
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 14/52] usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 13/52] usb: gadget: check for streams only for SS udcs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 12/52] usb: gadget: fsl_udc: fix the usage of udc->max_ep
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 11/52] drivers: usb: otg: Fix dependencies for some OTG drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB bug fixes for 3.3-rc1
  • From: Greg KH <gregkh@xxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] USB: try MSI before legacy irq on pci xhci HCD
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 14/15] kobil_sct: fix debug module parameter to be bool
  • From: Danny Kukawka <danny.kukawka@xxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Gadget driver rules question
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Gadget driver rules question
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Question on setting the USB wakeup feature when using the Gadget HID driver
  • From: Pablo Cases <pablo.cases@xxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Gadget driver rules question
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: [PATCH] usb: gadget: Add Interface Association Descriptor to ECM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1] usb: otg: mv_otg: Add dependence
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: zero: fix bug in loopback autoresume handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] [trivial] usb: Fix typo in langwell_otg.c
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: Gadget driver rules question
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Pavan Kondeti <pkondeti@xxxxxxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: "Klaus Rudolph" <lts-rudolph@xxxxxx>
• Re: Gadget driver rules question
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• [PATCH][v2]fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
• RE: linux-next: Tree for Jan 24 (usb/otg/mv_otg)
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH v1] usb: otg: mv_otg: Add dependence
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• RE: Gadget driver rules question
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Gadget driver rules question
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [PATCH] qcserial: add support for Huawei Gobi 3000 devices
  • From: José Antonio Matute <matutet@xxxxxxxxx>
• [PATCH] usb: gadget: zero: fix bug in loopback autoresume handling
  • From: Timo Juhani Lindfors <timo.lindfors@xxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] input: Hanvon Art Master I and Rollick tablet support (USB)
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] qcserial: add support for Huawei Gobi 3000 devices
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v5 2/2] USB: try MSI before legacy irq on pci xhci HCD
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• [PATCH v5 1/2] USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• Re: [PATCH v4 2/2] USB: Try MSI first before line IRQ in XHCI PCI driver.
  • From: "Alex,Shi" <alex.shi@xxxxxxxxx>
• RE: [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Problem with xHCI; mass storage device not detected
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Fix bug in ring expansion free TRB counting.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] qcserial: add support for Huawei Gobi 3000 devices
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 6/6] usb/composite: merge the two spinlocks
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v3] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: ohci, hub TUSB2046B, AT91SAM9G20 problem
  • From: "Janusz Uzycki" <janusz.uzycki@xxxxxxxxxxxxxx>
• [PATCH] [trivial] usb: Fix typo in langwell_otg.c
  • From: Masanari Iida <standby24x7@xxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Klaus Rudolph <lts-rudolph@xxxxxx>
• [PATCH] qcserial: add support for Huawei Gobi 3000 devices
  • From: José Antonio Matute <matutet@xxxxxxxxx>
• Re: Support Sony Vaio VPCSA WWAN modem (aka Huawei Gobi 3000) - patch
  • From: José Antonio Matute <matutet@xxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Problem with xHCI; mass storage device not detected
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH -next] uwb & wusb & usb wireless controllers: fix kconfig error & build errors
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: Support Sony Vaio VPCSA WWAN modem (aka Huawei Gobi 3000) - patch
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Support Sony Vaio VPCSA WWAN modem (aka Huawei Gobi 3000) - patch
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: zitev <zitev@xxxxxxxxxxx>
• [PATCH 4/6] usb/gadget: push disconnect into a workqueue
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 5/6] usb/gadget: convert the spinlock into a mutex for the wq user
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 3/6] usb/gadget: use a seperate lock activation counter
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 6/6] usb/composite: merge the two spinlocks
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/6] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/6] usb/gadget: remove disconnect in struct usb_composite_driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC/PATCH] gadget/composite: push set interface & set config into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Support Sony Vaio VPCSA WWAN modem (aka Huawei Gobi 3000) - patch
  • From: José Antonio Matute <matutet@xxxxxxxxx>
• [PATCH v3] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: autosuspend and devices without remote wakeup support
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• autosuspend and devices without remote wakeup support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC/PATCH] usb: host: xhci: use __ffs() instead of hardcoding shift
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 8/9] USB: Set wakeup bits for all children hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Klaus Rudolph <lts-rudolph@xxxxxx>
• Re: [PATCH 2/5] Dynamic ID addition doesn't need get_driver()
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] xHCI bug fixes for 3.3
  • From: Greg KH <gregkh@xxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• Re: [RFC v2 1/9] USB: Remove duplicate USB 3.0 hub feature #defines.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] xHCI bug fixes for 3.3
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: staging: usbip: use of bus IDs as resource identifiers
  • From: Greg KH <greg@xxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Tim Coote <tim@xxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: musb: make modules behave better
  • From: "Rajashekhara, Sudhakar" <sudhakar.raj@xxxxxx>
• staging: usbip: use of bus IDs as resource identifiers
  • From: Kaarle Ritvanen <kaarle.ritvanen@xxxxxxxxxxxxx>
• Re: ftdi_sio occasionally hangs in close()
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Tim Coote <tim@xxxxxxxxx>
• Re: [PATCH] usb: Skip PCI USB quirk handling for Netlogic XLP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: USB Gadget Framework?!
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH] usb: Skip PCI USB quirk handling for Netlogic XLP
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [RFC/PATCH] usb: host: xhci: use __ffs() instead of hardcoding shift
  • From: Felipe Balbi <balbi@xxxxxx>
• ftdi_sio occasionally hangs in close()
  • From: Ross Ryles <rossryles@xxxxxxxxxxxxxx>
• USB Gadget Framework?!
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Umakanta Patro <umakanta.patro@xxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: Use readl while handling PCI quirks
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Umakanta Patro <umakanta.patro@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: "Klaus Rudolph" <lts-rudolph@xxxxxx>
• Re: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Szilárd Zsolt Sztupák <mail@xxxxxxxxx>
• Re: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Umakanta Patro <umakanta.patro@xxxxxxxxxxxxxxxxx>
• Re: Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: "Sztupák Sz. Zsolt" <mail@xxxxxxxxx>
• RE: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Yves-Alexis Perez <corsac@xxxxxxxxxx>
• Re: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Fwd: Seeking support to get USB Host Interface (Mass Storage) working with Linux 2.6.35
  • From: Umakanta Patro <umakanta.patro@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Tim Coote <tim@xxxxxxxxx>
• Re: not supported hardware: Gigabyte K8100 Aivia USB Gaming Keyboard
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: use dedicated lock for device list to fix autoresume on open
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: use dedicated lock for device list to fix autoresume on open
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RE: [PATCH] usb/g_zero: don't access private data in complete callback on error
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: use dedicated lock for device list to fix autoresume on open
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/1] xHCI bug fixes for 3.3
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 8/9] USB: Set wakeup bits for all children hubs.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC v2 1/9] USB: Remove duplicate USB 3.0 hub feature #defines.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Yves-Alexis Perez <corsac@xxxxxxxxxx>
• Re: [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: coping with poor usb implementations
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Yves-Alexis Perez <corsac@xxxxxxxxxx>
• Re: [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Greg KH <greg@xxxxxxxxx>
• Re: starting a new hw driver for gadget support
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [3.2+] BUG: scheduling while atomic: swapper/0/0/0x10000100
  • From: Yves-Alexis Perez <corsac@xxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: coping with poor usb implementations
  • From: Tim Coote <tim@xxxxxxxxx>
• starting a new hw driver for gadget support
  • From: "Klaus Rudolph" <lts-rudolph@xxxxxx>
• Re: [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] USB: Realtek cr: fix autopm scheduling while atomic
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• Re: [PATCH] usb: musb: make modules behave better
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: make modules behave better
  • From: Tasslehoff Kjappfot <tasskjapp@xxxxxxxxx>
• [PATCH] usb: musb: make modules behave better
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH RESEND] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 00/10] Android Composite Gadget driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 00/10] Android Composite Gadget driver
  • From: Benoit Goby <benoit@xxxxxxxxxxx>
• RE: [PATCH] xhci: Fix bug in ring expansion free TRB counting.
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] xhci: Fix bug in ring expansion free TRB counting.
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [RFC v2 5/9] USB/xHCI: Enable USB 3.0 hub remote wakeup.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 8/9] USB: Set wakeup bits for all children hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 9/9] USB: Turn on auto-suspend for USB 3.0 hubs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 7/9] USB/xHCI: Support device-initiated USB 3.0 resume.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 6/9] USB: Refactor hub remote wake handling.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 5/9] USB/xHCI: Enable USB 3.0 hub remote wakeup.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 4/9] USB: Suspend functions before putting dev into U3.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 3/9] USB/xhci: Enable remote wakeup for USB3 devices.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 2/9] xHCI: Kick khubd when USB3 resume really completes.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 1/9] USB: Remove duplicate USB 3.0 hub feature #defines.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 0/9] USB 3.0 hub suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: sysfs_attr_ns: missing error handling & problem with usb/serial/io_ti
  • From: Wolfgang Frisch <wfpub@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH 1/1] xHCI: Cleanup isoc transfer ring when TD length mismatch found
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 0/1] xHCI bug fixes for 3.3
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH -next] uwb & wusb: fix kconfig error
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH resend] Clean up new_id and remove_id sysfs attribute routines
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] Dynamic ID addition doesn't need get_driver()
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: cdc-wdm: use dedicated lock for device list to fix autoresume on open
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb: cdc-wdm: use dedicated mutex for device list to fix autoresume on open
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb: cdc-wdm: use dedicated mutex for device list to fix autoresume on open
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] usb: cdc-wdm: use dedicated mutex for device list to fix autoresume on open
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RE: [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH] staging: usbip: fix to prevent potentially using uninitialized spinlock
  • From: Bart Westgeest <bart@xxxxxxxxxx>
• Re: [PATCH v2] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: [GIT PULL] USB patches for 3.3-rc2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [GIT PULL] USB patches for 3.3-rc2
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RFC: usb: musb: Changes proposed for adding CPPI4.1 DMA
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 2/3 v2] usb/dummy_hcd: fix null-deref free req
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb/dummy_hcd: don't assign ->desc on error case
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 3/3 v2] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3 v2] usb/dummy_hcd: fix null-deref free req
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 2/3] usb: cdc-wdm: adding list lookup indirection
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 1/3] usb: cdc-wdm: split out reusable parts of probe
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 3/3] usb: cdc-wdm: adding usb_cdc_wdm_register subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH 0/3] usb: cdc-wdm: subdriver support
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• [PATCH RESEND] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 2/3] usb/dummy_hcd: fix null-deref free req
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb/dummy_hcd: fix null-deref free req
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Fwd: platform driver (musb/davinci.ko) and resource.c
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/3] usb/dummy_hcd: allow to free requests on disabled endpoints
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] usb/dummy_hcd: fix null-deref free req
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/3] usb/dummy_hcd: don't assign ->desc on error case
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v2] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Fwd: platform driver (musb/davinci.ko) and resource.c
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: cdc-wdm: clean unused fields from the device state struct
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: gadget: Add Interface Association Descriptor to ECM
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: Add Interface Association Descriptor to ECM
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC/PATCH] usb: dwc3: omap: convert pdata to of property
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] USB patches for 3.3-rc2
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap2430 musb: Make musb_otg_notification non-blocking
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Michael Hunold <hunold@xxxxxxxxxxx>
• RE: [PATCH] fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
• Re: [PATCH] omap2430 musb: Make musb_otg_notification non-blocking
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH resend] Clean up new_id and remove_id sysfs attribute routines
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH resend] Clean up new_id and remove_id sysfs attribute routines
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/5] Get rid of get_driver() and put_driver()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: Add Interface Association Descriptor to ECM
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC] ttyUSB error on shutdown
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: Add Interface Association Descriptor to ECM
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] qcaux: add more Pantech UML190 and UML290 ports
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH] fsl/usb:Add controller version based ULPI and UTMI phy support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/7] usb: cdc-wdm: clean unused fields from the device state struct
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• RE: [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v2] usb: ehci-fsl: set INCR8 mode for system bus interface on MPC512x
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci-fsl: set INCR8 mode for system bus interface on MPC512x
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [PATCH]
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: ehci-fsl: set INCR8 mode for system bus interface on MPC512x
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] MMC, vub300: Resolve mem leak in vub300_probe() and simplify the code a bit
  • From: Jesper Juhl <jj@xxxxxxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH resend] Clean up new_id and remove_id sysfs attribute routines
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: zero: fix bug in loopback autoresume handling
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Michael Hunold <hunold@xxxxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Michael Hunold <hunold@xxxxxxxxxxx>
• [PATCH]
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] Dynamic ID addition doesn't need get_driver()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Get rid of get_driver() and put_driver()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: linux-next: Tree for Jan 24 (usb/otg/mv_otg)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] USB: OHCI: fix new compiler warnings
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Use a workqueue in usb_add_hcd() to reduce boot time
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] usb/gadget: push USB_REQ_SET_INTERFACE and USB_REQ_SET_CONFIGURATION into process context
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb/uas: make sure data urb is gone if we receive status before that
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH experimental 2/6] usb: cdc-wdm: prepare endpoint detection for interfaces with > 1 endpoint
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH experimental 2/6] usb: cdc-wdm: prepare endpoint detection for interfaces with > 1 endpoint
  • From: Bjørn Mork <bjorn@xxxxxxx>
• RE: Latest testusb.c, with my additions... While opening usbtest, what device should be opened?!
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Loh Tien Hock <thloh85@xxxxxxxxx>
• RE: [PATCH] usb: Use readl while handling PCI quirks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Latest testusb.c, with my additions... While opening usbtest, what device should be opened?!
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Re: Synopsys DWC OTG USB, round 4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: Latest testusb.c, with my additions... While opening usbtest, what device should be opened?!
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] usb: Use readl while handling PCI quirks
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: Multiple ep0 setup requests
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH experimental 2/6] usb: cdc-wdm: prepare endpoint detection for interfaces with > 1 endpoint
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Synopsys DWC OTG USB, round 4
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• RE: Latest testusb.c, with my additions... While opening usbtest, what device should be opened?!
  • From: "Stojsavljevic, Zoran" <zoran.stojsavljevic@xxxxxxxxx>
• Multiple ep0 setup requests
  • From: Michael Hunold <hunold@xxxxxxxxxxx>
• Re: Designware USB OTG driver upstream questions
  • From: Nikolai Zhubr <n-a-zhubr@xxxxxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v2] input: Hanvon Art Master I and Rollick tablet support (USB)
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 9/9] usb: dwc3: gadget: start core on Rx.Detect
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 8/9] usb: dwc3: gadget: dynamically re-size TxFifos
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/9] usb: dwc3: ep0: move to CONFIGURED also on delayed status
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/9] usb: dwc3: gadget: use the descriptor pointer we hold
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/9] usb: dwc3: gadget: fix XferNotReady debug print
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/9] usb: dwc3: gadget: allow Link state changes via debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/9] usb: dwc3: gadget: re-factor Link state change to a function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/9] usb: dwc3: gadget: allow testmodes changes via debugfs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/9] usb: dwc3: gadget: re-factor USB2 test mode to a function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/9] DWC3 patches which will go on next merge window
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCHv10 19/19] usb: otg: Convert all users to pass struct usb_otg for OTG functions
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 17/19] usb: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 03/19] usb: otg: Separate otg members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 04/19] usb: otg: ab8500: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 18/19] usb: otg: Remove OTG specific members from usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 16/19] usb: otg: mv_otg: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 15/19] power_supply: Convert all users to new usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 14/19] usb: musb: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 10/19] usb: otg: twl4030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 13/19] arm: imx: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 12/19] usb: otg: ulpi: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 11/19] usb: otg: twl6030: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 07/19] usb: otg: isp1301_omap: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 08/19] usb: otg: msm: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 06/19] usb: otg: gpio_vbus: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 09/19] usb: otg: nop: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 05/19] usb: otg: fsl: Start using struct usb_otg
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 02/19] usb: otg: Rename usb_xceiv_event to usb_phy_event
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 01/19] usb: otg: Rename otg_transceiver to usb_phy
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCHv10 00/19] First round in OTG rework
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb/dwc3: unmap the proper number of sg entries
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/9] usb: dwc3: gadget: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/9] usb: gadget: langwell: use generic map/unmap functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/9] usb: gadget: amd5536: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/9] usb: gadget: r8a66597: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/9] usb: gadget: net2272: use generic map/umap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 8/9] usb: gadget: net2280: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/9] usb: renesas: gadget: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/9] usb: gadget: add generic map/unmap request utilities
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/9] usb: gadget: generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] usb/dwc3: unmap the proper number of sg entries
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb/dwc3: unmap the proper number of sg entries
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: misc: emi: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: misc: emi: fix compile warning
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb/dwc3: unmap the proper number of sg entries
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH experimental 4/6] usb: cdc-wdm: adding interface => wdm_device list lookup
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 8/9] usb: gadget: net2280: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] drivers: usb: update Michal Nazarewicz's email address
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/f_mass_storage: remove one FSG_NO_INTR_EP
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] usb/dummy_hcd: clean up checkpatch
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] usb/dummy_hcd: use usb_endpoint_type()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb/dummy_hcd: complete stream support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6 v2] usb/gadget/pch_udc: Fix disconnect issue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/3] S3C2443: add power domain for usb phy
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] s3c-hsudc: add basic runtime_pm calls
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] s3c-hsudc: Use helper functions instead of generic container_of
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] usb: renesas_usbhs: add support for SUDMAC
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] usb: renesas_usbhs: add IRQ resource decoding for IRQF_SHARED
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [patch] usb: gadget: mv_udc: remove unneeded NULL check
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: My current dummy_hcd queue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: fix shutdown while usb gadget is in use
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] drivers: usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb/gadget: check for streams only for SS udcs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 1/2] usb: gadget: fsl_udc: fix the usage of udc->max_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: misc: emi: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap2430 musb: Make musb_otg_notification non-blocking
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH experimental 5/6] usb: cdc-wdm: adding register/deregister
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH experimental 4/6] usb: cdc-wdm: adding interface => wdm_device list lookup
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: add wrappers for subdriver methods
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Synopsis OTG driver (DWC / S3C / IFX) porting question
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH experimental 5/6] usb: cdc-wdm: adding register/deregister
  • From: Bjørn Mork <bjorn@xxxxxxx>